Water-based liquid styrene acrylic polymer emulsion

for soil stabilization, dust suppression, erosion control, etc.

- HN-541 for road construction
- HN-130VA for general dust control
- HN-158T for long term dust control

FREE SAMPLES ARE AVAILABLE FOR YOUR EVALUATION BEFORE ANY TRIAL ORDERS.











1.HN-541 Water-based styrene acrylic polymer emulsion for light road construction

HN-541 Water-based styrene acrylic polymer emulsion for light road construction	Appearance	Milky white and light blue liquid
	Solid content	50+-1%
	Viscosity.cps (25oC)	1000-3000
	PH	6.0-7.0
	Glass Transition Temperature (Tg)	25oC

2.HN-130va, Water-base PVA polyvinyl acetate acrylates copolymer emulsion for dust suppression, erosion control

HN-130va Water-base PVA polyvinyl acetate acrylates copolymer emulsion  for dust suppression, erosion control	Appearance	Milky white liquid
	Solid content	48+-1%
	Viscosity.cps (25oC)	100-1000
	PH	2.0-5.0
	Minimum Film Formation Temperature (MFT)	0oC
	Ca2+ stability 5%CaCl2:emulsion=1:3, 48h, No Flocculation, No Stratification.	Pass

 

3.HN-158t, Water-based silicone modified styrene acrylic emulsion for dust/sand suppression, erosion control

HN-158t Water-based silicone modified styrene acrylic emulsion  for dust/sand suppression, erosion control	Appearance	Light blue
	Solid content	50+-1%
	Viscosity.cps (25oC)	1500-3000
	Particle size (nm)	90-160
	PH	6.0-7.0
	Minimum Film Formation Temperature (MFT)	0oC
	Ca2+ stability 5%CaCl2:emulsion=1:3, 48h, No Flocculation, No Stratification.	Pass

A unique emulsion of microscopic cross-linked polymers creates the basis of ability to outperform and provide immediate results.

Perfect for 'non-trafficked' areas, the ultra-low concentration makes it the ideal performance product for mining, civil & infrastructure industries. It has been developed with ease in mind and is highly effective, environmentally friendly and increasingly cost-effective over time.

It can be applied onto all forms of tailings and minerals, ash dams, stockpiles and substrates. The polymers penetrate into the substrate below, forming an interconnected flexible crust, binding to the fine particles and granules to eliminate dust. Using robust polymer-based products, forms a stable layer of bonded material, resistant to erosive wind and rain forces.

 

Suitable for all forms of exposed stockpiles, substrates, tailings and minerals

Forms a strong, durable and flexible crust

Eliminates dust lift-off after a single application

Withstands moderate to heavy rain events

Non-toxic and environmentally friendly

Water Retention Basin & Pond Lining

Aircraft Runways (Heavy use)

Aircraft Runways (single engine)

Helicopter landing pads( Heavy craft)

Helicopter landing pads( Light craft)

Heavy Haul Roads & Mining Roads

Military Convoy & Supply Roads

Roads ( High Traffic)

Residential Driveways

Parking lots

Roads (Light Traffic)

Golf Course Bunker Liner

Golf Course Cart Paths

Walking Trails and Paths

Road Sealer over Soiltac Stabilized Base

BMX Tracks

Temporary Parking Lots

Temporary Roads & Detours

Road Shoulders

Slope Erosion Control (Steep Slope)

Slope Erosion control (Average slope)

Slope Erosion Control (Light Slope)

Stock Pile Dust Capping (Steep Slope)

Stock Pile Dust Capping (Average Slope)

Stock Pile Dust Capping (Light Slope)

Hazardous Material Capping & Sealing

Landfill Capping & Reclamation

Odor & Vapor Suppression

Mine Tailings Capping & Reclamation

Coal Rail Car Capping

Dust Control (30 Days)

Dust Control (90 Days)

Dust Control (6 Months)

Dust Control (12 Months)

Dust Control (12-24 Months)

Hydroseed & Hydromulch Tackifier

 

 

Base Stabilization Light (4-10cm deep)

Base Stabilization Average(4-10cm deep)

Base Stabilization Heavy (4-10cm deep)

Road Pot Hole Repair (4-10cm deep)

Adobe Blocks & Earth Blocks (6-15cm Tall)

Base Stabilization Light (6-15cm deep)

Base Stabilization Average (6-15cm deep)

Packing:
50kgs plastic drum/160kgs plastic drum/200kgs plastic drum/1000kgs IBC pallet/20000kgs soft packing.

Storage and transportation:
1.This chemical should be stored in a ventilated and dry room, avoiding direct sunlight.
2.Transport and store in the 5^oC-35^oC environment.
3.Shelf life is 1 year from the date of first use.

Safety notice:
The water-based polymer emulsion is non-toxic and non-flammable. If it splashes into the eyes, it should be washed with plenty of water immediately.

1. Two factories in China. Headquarters is in Qingzhou city and the production factory is in Qingdao city.
2. 110,000.00 square meters covering area in total.
3. Nearly 30 years of water based acrylic polymer production experience.
4. Top class research teams and full automatic manufacturing lines.
5. Eco friendly products.
6. Up to 200,000 tons production yearly.
7. International sales ability.  

 

Q: How long is your lead time?
A: The normal lead time is 5-10 days. It is according to the quantity and inquires of us before place any orders.

Q: Do you provide free samples? Are the samples free of charge or need to be paid?
A: Yes, Free samples of 0.5-1 kg for each type are available for our customers. The samples are free but the freight is collected.

Q: What are the terms of payment?
A: Full payment is needed in advance before shipment.

Q: How about your research ability? Do you offer technical support services?
A: We have our own research labs and testing labs. Many universities and institutes have built a long-term strategic partnership with us. We offer technical support services for our customers.

Q: Can I place a small order for the first time to test the quality?
A: Yes, you can order 1-5 tons of emulsion polymers to run tests in your factory for the start order.

Q: Can I visit your factory?
A: Yes, you are welcome to visit our production factory in Qingdao or headquarters in Qingzhou.

Q: Do you accept customized orders?
A: Yes, we take customized orders. Please inquire of us before place such orders.

Q: Can you help us develop our own factory in our own country?
A: Yes, we can help our customers to build their own factories in their countries. Please talk with our director about the details.