Flocking polyester fiber acoustic Panel

Using Kingkus polyester fiber sound-absorbing board as the substrate, hand-painted flowers and flocking on the surface

Using E0 green pulp and fluff, through the electrostatic technology to make the material effectively combined with the surface of the material

Adopt environmentally friendly plastic stick paste, solid does not fall off , Formaldehyde-free

Substrate color 35, flocking color 30 species, size: 600 * 600 * 9mm, 600 * 1200 * 9mm

More than just a traditional interior acoustic panel; Kingkus polyesrter fiber acoustic panel can be employed as a base material for creative solutions where design and aesthetics are important.
Kingkus polyesrter fiber acoustic panel is made from 100% polyester fiber. Containing a minimum of 75% post-consume recycled material (PET bottle-flake); Kingkus polyesrter fiber acoustic panel is completely safe, non-toxic, non-allergenic and non-irritant.

Kingkus Line Embossed panels are a good design by hot mold. Each size is 1200*600mm, and the spacing between lines 3CM and 6CM will be permanently saved.

Description

An acoustic panel with Line embossed made by Kingkus 

Composition

100% PET (75% recycled content,25% fire rated fiber)

Panel Thickness / Dimensions

9mm (stock), 12mm(stock), 24mm*, Kingkus Screen* (*mins apply) / Emboss Dimensions: Panel 1200 x 600mm 

Application

screens, wall and ceiling panels, pinboards

Type

Panel

Performance Rating

NRC 0.30 - 1.00 dependent on panel thickness, refer to  kingkus information

Performance

- Improved Sound Absorption
- Improved Pinability
- Lightweight, Easy to Handle + Install
 

Fire Test

ASTM E84-CLASS A
BS 476 PART7 CLASS 1Y
ASTM E84 CLASS B

Additional Information

- Edging Profile: aluminium edging is available for each panel thickness

Environmental
Kingkus is committed to best practice through our ISO 9001 and ISO 14001 accredited Quality and Environmental Management Systems.

Kingkus products contains a minimum of 75% previously recycled polyester fiber (from PET bottleflake)
ensuring comparatively low embodied energy.
Off-cuts and manufacturing waste is re-used or
recycled wherever possible.
Uncontaminated kingkus polyester fiber panel can be recycled.

Kingkus polyester fiber acoustic panel is manufactured from 100% polyester fibers and does not contain chemical binders including
formaldehyde. Kingkus polyester fibers support safer
indoor air quality and will not become a potential
airborne pollutant.
Suitable applications
Tackboard, hook-and-loop receptive surface, acoustic wallcovering. Accepts tacks and staples
Toxicity
Polyester is classed as no more toxic than wood under the state of New York Article 15 part 1120. Polyester is pH7.8 (where pH7.0 is neutral),resistant to biological, bacterial or vermin attack.

Impact Resistance
Not adversely affected at impact velocities over 52.5ft/s

Finish
Polyester fiber Non-woven. No pattern repeat but Panel has a directional grain. Product may vary from samples and batch to batch due to fiber blending and lay-up which is an inherent feature of this product.

Physical description / properties
Boiling Point: N/A
Melting Point: 428ºF
Vapour Pressure: N/A
Specific Gravity: Polyester 1.38
Flash point: N/A
Explosive limits: N/A
Solubility in water: Not soluble
Alkalinity: pH 7.8
Relative Vapour Density: N/A

Cleaning And Care:
Remove dust and dirt by dusting, vacuuming, or with a soft cloth or sponge and a solution of carpet
or upholstery shampoo. Always use a soft, damp cloth and blot dry. Spot cleaner 
Commercial Instant Spot Remover has been used with success for light soil. No guarantee is given for cleaning results with this product.

Service
For further information about our panel or any other
Kingkus product, please contact your installation
professional

More Application