CNC Wire Cut Sets of Elec Discharge

China CNC Wire Cut Sets of Elec Discharge, Find details about China Wire Cut, Wire Cutting Machine from CNC Wire Cut Sets of Elec Discharge

Model NO.
7740
Performance Classification
Economical CNC Machine Tools
Certification
GS, ISO 9001
Condition
New
Tire Mold EDM
340p
Trademark
SUNUP
Transport Package
Wooden Case
Specification
2000*1200*1700
Origin
Jinan
HS Code
8456301090
Model NO.
7740
Performance Classification
Economical CNC Machine Tools
Certification
GS, ISO 9001
Condition
New
Tire Mold EDM
340p
Trademark
SUNUP
Transport Package
Wooden Case
Specification
2000*1200*1700
Origin
Jinan
HS Code
8456301090

 CNC Wire Cut Sets of Elec Discharge
CNC Wire Cut Sets of Elec Discharge

ModelWorktable size (mm)Worktable travel (mm)Max. cutting thickness (mm)Processing taperMax. load weight (kg)Main machine weight(kg)
DK7720250x320200x2502006°/80mm100800
DK7725270x420250x3204006°/80mm2001200
DK7732380x600320x4004006°/80mm300140
DK7740410x710400x5004006°/80mm4501600
DK7745500x750450x5504006°/80mm4501650
DK7755596x880550x6505006°/80mm8002500
DK7763790x1260630x10006006°/80mm10003500
DK7780900x1500800x12006006°/80mm15005500
DK771001010x15001000x12006006°/80mm15005600
DK771201300x19001200x16006006°/80mm400010000


CNC Wire Cut Sets of Elec Discharge

  1. Optional two-axis or four-axis hybrid stepper motor
    2. Four-axis hybrid motor effectively enhance the dynamic response characteristics of large swing machine, to ensure the accuracy of a large taper cutting
    3. Spray water to follow the molybdenum wire tilt, in the cutting process to ensure smooth chip removal, is conducive to the stability of the large taper processing
    4. Through the machine tool parts of the aging, heat treatment and effective, sophisticated follow-up processing, assembly, making the machine has a good accuracy and accuracy to maintain the characteristics
    5. Electric control part of the non-power resistance, no transformer, so the cabinet does not heat, all the energy are used for cutting and greatly delay the aging of components, is conducive to long-term rapid cutting
    6. Narrow pulse width, high current characteristics of high-frequency power supply, wire conveyor for the smooth characteristics of the machine and the various parts of the fine processing and assembly characteristics to ensure that the cutting of the workpiece surface quality
    7. The use of non-stop constant current high frequency voltage cutting process, effectively avoiding the voltage and current negative, which greatly reduces the loss of molybdenum wire, constant current source technology to enhance the utilization of power, reduce power consumption
    8. Innovative peak current limiting method and technology, even in the high current cutting, encountered cutting short circuit, due to the peak current is limited, it will not break the wire, thereby significantly reducing the rate of broken wire
    9.V-axis optional linear guide, ball screw, improve the quality of taper processing




FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.

Q. Could your engineers go to our factory to install the machine and train our workers?

A:Yes, our engineers could go to your factory and assist you.

Q:What is your warranty?

A:One year after shipment ,consumables are not included.

Q: What is your terms of payment ?

A:L/C or T/T before shipment.




Description

Electrical Discharge Machine(EDM), Die-sinking EDM, also called cavity type EDM or volume EDM, consists of an electrode and workpiece submerged in an insulating liquid such as, more typically, oil or, less frequently, other dielectric fluids. The electrode and workpiece are connected to a suitable power supply. The power supply generates an electrical potential between the two parts. As the electrode approaches the workpiece, dielectric breakdown occurs in the fluid, forming a plasma channel, and a small spark jumps.

These sparks usually strike one at a time because it is very unlikely that different locations in the inter-electrode space have the identical local electrical characteristics which would enable a spark to occur simultaneously in all such locations. These sparks happen in huge numbers at seemingly random locations between the electrode and the workpiece. As the base metal is eroded, and the spark gap subsequently increased, the electrode is lowered automatically by the machine so that the process can continue uninterrupted. Several hundred thousand sparks occur per second, with the actual duty cycle carefully controlled by the setup parameters. These controlling cycles are sometimes known as "on time" and "off time". The on time setting determines the length or duration of the spark. Hence, a longer on time produces a deeper cavity for that spark and all subsequent sparks for that cycle, creating a rougher finish on the workpiece. The reverse is true for a shorter on time. Off time is the period of time that one spark is replaced by another. A longer off time, for example, allows the flushing of dielectric fluid through a nozzle to clean out the eroded debris, thereby avoiding a short circuit. These settings can be maintained in microseconds. The typical part geometry is a complex 3D shape, often with small or odd shaped angles. Vertical, orbital, vectorial, directional, helical, conical, rotational, spin and indexing machining cycles are also used.

Main Features

  1. Complex shapes that would otherwise be difficult to produce with conventional cutting tools.
  2. Extremely hard material to very close tolerances.
  3. Very small work pieces where conventional cutting tools may damage the part from excess cutting tool pressure.
  4. There is no direct contact between tool and work piece. Therefore delicate sections and weak materials can be machined without any distortion.
  5. A good surface finish can be obtained.
  6. very fine holes can be drilled.

          

CNC Wire Cut Sets of Elec Discharge

CNC Wire Cut Sets of Elec Discharge  CNC Wire Cut Sets of Elec Discharge




Specification
 
ItemsUnit340P
X Travelmm450
Y Travelmm350
Z Travelmm210
Cutting Accuracy"45
Max. Electrode Weight kg180
Max. Workpiece Weight kg1200
Max. Workpiecemm1030*650*500
Dielectric Fluid Reservoirmm900*500*350
Max.Electric CurrentA75
Power SupplyAC200V-440V
Input Power KVA6
Min. ON TIMEμs1
Min. OFF TIME μs1
Max. Working Speed mm/min420
Best Surface PrecisionμmRa0.02
Min. Electrode Wear Rate %<0.3
Machine Unit Dimensions (W x D x H)mm1400*1000*425
Machine Unit WeightKg1500


CNC Wire Cut Sets of Elec Discharge

CNC Wire Cut Sets of Elec Discharge
CNC Wire Cut Sets of Elec Discharge
CNC Wire Cut Sets of Elec Discharge