Steel Plate 1.2739 (SLD/ D2 /XW42) Hot Work Mould Steel
China Steel Plate 1.2739 (SLD/D2/XW42) Hot Work Mould Steel, Find details about China Mould Steel, Hot Work Mould Steel from Steel Plate 1.2739 (SLD/D2/XW42) Hot Work Mould Steel
Basic Info.
Model NO.
Steel plate 1.2739(SLD/D2/XW42) Cold Work Mould
Heat Treatment
Annealed
Length
3000-5800mm
Non-Metallic Inclusiton
ASTM E45
Grain Size
ASTM E112
Process
Eaf+Lf+Vd+Forged+Heat Treatment(Optional)
Technology
Hot Rolled/ Forged/ Cold Drawn
Usage
Automotive, Aerospace, Power Generation, Oil & Gas
Ex-Stock
Yes
Service
24 Hours on Line
Other Type
Engineering Steel, Cold Work Tool Steel
Test
Ensile Strength, Yield Strength, Elongation,
Other Type 1
Engineering Steel, Cold Work Tool Steel
Other Type 2
Hot Work Tool Steel, Plastic Mold Steel
Other Type 3
Spring Steel, High Speed Steel, Stainless Steel
Other Type 4
Mold Steel, Free Cutting Steel, Cold Heading Steel
Trademark
zayi
Transport Package
Seaworthy Package
Specification
DIA 60-600
Origin
China
HS Code
72284000
Model NO.
Steel plate 1.2739(SLD/D2/XW42) Cold Work Mould
Heat Treatment
Annealed
Length
3000-5800mm
Non-Metallic Inclusiton
ASTM E45
Grain Size
ASTM E112
Process
Eaf+Lf+Vd+Forged+Heat Treatment(Optional)
Technology
Hot Rolled/ Forged/ Cold Drawn
Usage
Automotive, Aerospace, Power Generation, Oil & Gas
Ex-Stock
Yes
Service
24 Hours on Line
Other Type
Engineering Steel, Cold Work Tool Steel
Test
Ensile Strength, Yield Strength, Elongation,
Other Type 1
Engineering Steel, Cold Work Tool Steel
Other Type 2
Hot Work Tool Steel, Plastic Mold Steel
Other Type 3
Spring Steel, High Speed Steel, Stainless Steel
Other Type 4
Mold Steel, Free Cutting Steel, Cold Heading Steel
Trademark
zayi
Transport Package
Seaworthy Package
Specification
DIA 60-600
Origin
China
HS Code
72284000
Product Desciption
Steel plate 1.2739(SLD/D2/XW42) Hot Work Mould Steel
1: D2 steel introduction
The chemical content for D2 tool steel is 1.4-1.6% carbon, 0.60% manganese, 11.00-13.00% chromium, 0.30% nickel, 1.10% vanadium, and 0.70-1.20% molybdenum. The primary use of this steel is for making stamping dies that cut steel pieces out of other, softer steels. The actual percentage of D2 tool steel produced by steel makers that winds up in use as knife blades is quite small.
2: D2 Steel equivalent
3: D2 steel chemical composition
4: D2 steel mechanical properties
5: D2 steel overviews
6: Delivery condition
For hot forged bar, usually the delivery condition is hot forged, annealed rough turned/Black surface.
For hot rolled bar, usually the delivery condition is hot rolled, annealed, Black surface.
For hot forged plate, usually the delivery condition is hot forged, annealed, milled surface
For hot rolled plate, usually the delivery condition is hot rolled, annealed, black surface.
FAQ:
Q: Where is your company ?
A: Our company located in liaocheng , shandong provice of China.
Q: Are you trading company or manufacturer?
A: we are manufacturer.
Q: How long is your delivery time?
A: Generally is 7-10 working days of goods in stock, or 20-30 days if goods are not in stock, it is according to quantitiy.
Q: Do you provide samples? is it free or extra?
A: Yes, we could offer the sample for free charge.but the customers have to pay the sample courier cost.
Q:. What kind of terms of payment?
A: T/T, L/C,Western Union Alipay,Cash are available.
Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
1: D2 steel introduction
The chemical content for D2 tool steel is 1.4-1.6% carbon, 0.60% manganese, 11.00-13.00% chromium, 0.30% nickel, 1.10% vanadium, and 0.70-1.20% molybdenum. The primary use of this steel is for making stamping dies that cut steel pieces out of other, softer steels. The actual percentage of D2 tool steel produced by steel makers that winds up in use as knife blades is quite small.
2: D2 Steel equivalent
| Country | Japan | Germany | China | USA | EU |
| Standard | JIS G4404 | EN ISO4957 | GB/T1299 | ASTM A681 | EN-GJSA-XNiCr20-2 |
| Grade | SKD11 | X153CrMo12/1.2379 | Cr12Mo1V1 | D2 |
3: D2 steel chemical composition
| Grade | C | Si | Mn | P | S | Cr | V | Mo |
| D2 | 1.4-1.6 | 0.1-0.6 | 0.1-0.6 | 0.03 | 0.03 | 11-13 | 0.5-1.1 | 0.7-1.2 |
| 1.2379 | 1.45-1.6 | 0.15-0.6 | 0.2-0.6 | 0.03 | 0.03 | 11-13 | 0.7-1 | 0.7-1 |
| SKD11 | 1.4-1.6 | 0.4 | 0.6 | 0.03 | 0.03 | 11-13 | 0.2-0.5 | 0.8-1.2 |
4: D2 steel mechanical properties
| Rm - Tensile strength (MPa) | 370 |
| Rp0.2 0.2% proof strength (MPa) | 210 |
| KV - Impact energy (J) | +20° 13 |
| A - Min. elongation at fracture (%) | 7 |
5: D2 steel overviews
| Size | Round | Dia 10-200mm |
| Flat bar/plate | Thickness:6mm-500mm | |
| Width:20mm-1000mm | ||
| Heat treatment | Normalized ; Annealed ; Quenched ; Tempered | |
| Surface condition | Black; Peeled; Polished; Machined; Grinded; Turned; Milled | |
| Delivery condition | Forged; Hot rolled; Cold drawn | |
| Test | Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. | |
| Payment terms | T/T;L/C | |
| Trade terms | FOB; CIF; CFR | |
| Delivery time | 7-15 days | |
| Application | D2 used for Blanking Dies, Forming Dies, Coining Dies, Slitting Cutters, Heading Tools, Long Punches, Forming Rolls, Edging Rolls, Master Tools, Beading Rolls, Intricate Punches, Extrusion Dies, Drawing Dies, Lamination Dies, Thread Rolling Dies, Shear Blades, Burnishing Tools, Gauges, Knurls, Wear Parts. | |
6: Delivery condition
For hot forged bar, usually the delivery condition is hot forged, annealed rough turned/Black surface.
For hot rolled bar, usually the delivery condition is hot rolled, annealed, Black surface.
For hot forged plate, usually the delivery condition is hot forged, annealed, milled surface
For hot rolled plate, usually the delivery condition is hot rolled, annealed, black surface.
FAQ:
Q: Where is your company ?
A: Our company located in liaocheng , shandong provice of China.
Q: Are you trading company or manufacturer?
A: we are manufacturer.
Q: How long is your delivery time?
A: Generally is 7-10 working days of goods in stock, or 20-30 days if goods are not in stock, it is according to quantitiy.
Q: Do you provide samples? is it free or extra?
A: Yes, we could offer the sample for free charge.but the customers have to pay the sample courier cost.
Q:. What kind of terms of payment?
A: T/T, L/C,Western Union Alipay,Cash are available.
Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......