Gcl for Waste Landfill Geosynthetic Clay Liner
China Gcl for Waste Landfill Geosynthetic Clay Liner, Find details about China Gcl, Geosynthetic Clay Liners from Gcl for Waste Landfill Geosynthetic Clay Liner
Basic Info.
Model NO.
TH-004
Weight
4500GSM-6000GSM
Trademark
Tinhy
Transport Package
Woven Bag
Specification
5.5*30m
Origin
Shandong Province, China
HS Code
6815999000
Model NO.
TH-004
Weight
4500GSM-6000GSM
Trademark
Tinhy
Transport Package
Woven Bag
Specification
5.5*30m
Origin
Shandong Province, China
HS Code
6815999000
Product Desciption
GCL for waste landfill geosynthetic clay liner
Geosynthetic clay liners (GCLs) are high performance needle punched environmental reinforced composites which combine two durable geotextile outer layers with a uniform core of natural sodium bentonite clay to form a hydraulic barrier. Fibers from the non-woven geotextile are needle punched through the layer of bentonite and incorporated into the other geotextile (either a woven or non-woven).when hydrated under a confining load, the bentonite swells to form a low permeability clay layer with the equivalent hydraulic protection of several feet of compacted clay.
Applications:
This Bentonite production line is usded to bond 3layers of top geotextile, middle bentonite sand, and down plastic woven film.
The water proof bentonite pad is mainly used in penetration-proof,airproof &separation in rubbish burying square,man-made lake,channel,pool,basement,subway,etc.
The production line processing of finished products with high peel strength, strong pulling hardness, low permeability.
Product Feature
Compactness: sodium base bentonite under water pressure condition to form diaphragm with high density, thickness of about 3 mm, its permeability is & x 10 m/SEC 11 below, equivalent to 100 times the compactness of 30 cm thickness of clay, have very strong since the water retention performance.
Permanent waterproof performance: because sodium base bentonite is a natural inorganic material, even after a long time or the surrounding environment changes, also won't happen aging or corrosion phenomena, so the waterproof performance persistence.
Construction simple and short time limit: compared to other waterproofing materials, construction is relatively simple, don't need to be heated and paste.With bentonite powder and nails, washers, etc are connected and fixed.After construction does not need special inspection, if it is found that the waterproof defects and easy to maintenance.GCL is existing waterproof material in construction period of the shortest.
Integration: sodium base bentonite under water, the swelling capacity of 20~28 times, even if the concrete structure vibration and settlement, within the GCL bentonite can also repair the crack on the surface of the concrete within 2 mm.
Green: bentonite as natural inorganic material, non-toxic harmless to human body, no special effects to the environment, have good environmental performance.
Part Four: others
Packaging & Shipping
The Packaging of HDPE geomembranewoven bag or as customers' requests
Certification
Our products are well sold to various regions in China, and are exported to South Africa, Algeria, Russia, Australia and Israel. Our company has passed ISO9001:2000 International Quality System Certification, ISO14001:2004 Environment Management System Certification and GB/T28001:2001 Vocational Health and Safety System Certification. Besides, our company has successfully passed on-site check on production license, and has gained "National Industrial Product Production License" and water-proof qualification. We have been the member of Chinese Technical Association on Geosynthetics and have been recognized as a "Provincial-level Enterprise Abiding by The Contract, Keeping Promise" for several successive years. Besides, we were awarded with the titles of "One of Top 10 Famous Brands with Recognized Quality Assurance Standards in China's Plastic Products Industry", "Well-Known Products in China" and "One of Top 10 Enterprises among China's Composite Geomembrane Industry". We have obtained self-supporting import and export rights.
FAQ
1. Q: What's about your production capacity?
A: We produce 10 x 40ft container per day for our product.
2. Q: How about your delivery time?
A: Within 7-14 days after deposit, we always deliver the goods according to customer's requirement.
3. Q: What's about the minimum order quantity?
A: The MOQ is 5000m2, customer can mix different sizes in one 20GP. We suggest at least 20GP,as by our exporting experience, 20GP container sea freight is more economic.
4. Q: How about quality guarantee of your product?
A:1) Material Purchase Control. Our Material are imported from Saudi Arabia. Those country specializing in better raw material.
2) Advanced production equipment, producing ASTM specification data.
4)We could provide you TRI or BTTG test report if you need.
5. Q: Do you have stock?
A: All geomembrane we send to customers are new product. We don't have any stock to ensure customers use best new product and new patterns.
6. Q: Terms of payment
A: 1). First time cooperation, we can accept 30% TT deposit, the balance should be paid against copy of B/L within 10 days.
2). By irrevocable LC at sight.
7. Q: What certificates do you have?
A: CE, ISO, SGS, TRI, BTTG, MSDS
Website: http://sdtianhai.en.made-in-china.com
Shandong Tianhai New Materials Engineering CO., LTD was established in 2002, specializes in the production, R&D, application and construction of new engineering materials.
The company covers an area of more than 70,000 square meters with 110 million registered capitals, more than 325 staff, 21 various advanced production lines, who is the member unit of China Geosynthetics Engineering Association, China National Building Waterproof Association, China Plastics Processing Industry Association and Shandong Building Materials Industry Association.
The company has products of three categories, twelve series, hundred types, The products are widely used in five fields: eco-environmental protection, irrigated agriculture, traffic engineering, municipal gardens, building waterproof.
Sodium bentonite waterproof blanket GCL
Part one: Description of GCL waterproof blanket
Part Two: Technical of GCL waterproof blanket
| GCL-NP | Physdical requirements |
| ≥200g/m2 | Mass per unit area of cover layer(polypropylene nonwoven) |
| ≥105g/m2 | Mass per unit area of carrier layer(polypropylene woven) |
| ≥4000g/m2 | Mass per unit area of bentonite layer(sodium bentonite powder) |
| ≥5.0mm | Thickness |
| 24ml/2g | Swell index(bentonite layer) |
| ≤18ml | Fluid loss(bentonite layer) |
| ≥40N/100mm | Peel strength |
| ≤5.10-9cm/min | Permeability/Hydraulic conductivity |
| ≥600N/100mm | Tear strength |
| ≥5.5×30m | Width × length |
Part Three: The Application of GCL
Applications:
This Bentonite production line is usded to bond 3layers of top geotextile, middle bentonite sand, and down plastic woven film.
The water proof bentonite pad is mainly used in penetration-proof,airproof &separation in rubbish burying square,man-made lake,channel,pool,basement,subway,etc.
The production line processing of finished products with high peel strength, strong pulling hardness, low permeability.
Product Feature
Compactness: sodium base bentonite under water pressure condition to form diaphragm with high density, thickness of about 3 mm, its permeability is & x 10 m/SEC 11 below, equivalent to 100 times the compactness of 30 cm thickness of clay, have very strong since the water retention performance.
Permanent waterproof performance: because sodium base bentonite is a natural inorganic material, even after a long time or the surrounding environment changes, also won't happen aging or corrosion phenomena, so the waterproof performance persistence.
Construction simple and short time limit: compared to other waterproofing materials, construction is relatively simple, don't need to be heated and paste.With bentonite powder and nails, washers, etc are connected and fixed.After construction does not need special inspection, if it is found that the waterproof defects and easy to maintenance.GCL is existing waterproof material in construction period of the shortest.
Integration: sodium base bentonite under water, the swelling capacity of 20~28 times, even if the concrete structure vibration and settlement, within the GCL bentonite can also repair the crack on the surface of the concrete within 2 mm.
Green: bentonite as natural inorganic material, non-toxic harmless to human body, no special effects to the environment, have good environmental performance.
Part Four: others
Packaging & Shipping
The Packaging of HDPE geomembrane
Shipping:
7 days after receive the advance payment Certification
Our products are well sold to various regions in China, and are exported to South Africa, Algeria, Russia, Australia and Israel. Our company has passed ISO9001:2000 International Quality System Certification, ISO14001:2004 Environment Management System Certification and GB/T28001:2001 Vocational Health and Safety System Certification. Besides, our company has successfully passed on-site check on production license, and has gained "National Industrial Product Production License" and water-proof qualification. We have been the member of Chinese Technical Association on Geosynthetics and have been recognized as a "Provincial-level Enterprise Abiding by The Contract, Keeping Promise" for several successive years. Besides, we were awarded with the titles of "One of Top 10 Famous Brands with Recognized Quality Assurance Standards in China's Plastic Products Industry", "Well-Known Products in China" and "One of Top 10 Enterprises among China's Composite Geomembrane Industry". We have obtained self-supporting import and export rights.
FAQ
1. Q: What's about your production capacity?
A: We produce 10 x 40ft container per day for our product.
2. Q: How about your delivery time?
A: Within 7-14 days after deposit, we always deliver the goods according to customer's requirement.
3. Q: What's about the minimum order quantity?
A: The MOQ is 5000m2, customer can mix different sizes in one 20GP. We suggest at least 20GP,as by our exporting experience, 20GP container sea freight is more economic.
4. Q: How about quality guarantee of your product?
A:1) Material Purchase Control. Our Material are imported from Saudi Arabia. Those country specializing in better raw material.
2) Advanced production equipment, producing ASTM specification data.
4)We could provide you TRI or BTTG test report if you need.
5. Q: Do you have stock?
A: All geomembrane we send to customers are new product. We don't have any stock to ensure customers use best new product and new patterns.
6. Q: Terms of payment
A: 1). First time cooperation, we can accept 30% TT deposit, the balance should be paid against copy of B/L within 10 days.
2). By irrevocable LC at sight.
7. Q: What certificates do you have?
A: CE, ISO, SGS, TRI, BTTG, MSDS
Website: http://sdtianhai.en.made-in-china.com
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......