China Mill Finish Aluminium Coil for UV & Thermal CTP Offset Plates (1A25, 1100, 1060), Find details about China Aluminum Coil, Aluminum Plate from Mill Finish Aluminium Coil for UV & Thermal CTP Offset Plates (1A25, 1100, 1060)
Alloy | Temper | Thickness (mm) | Width (mm) | Coil ID (mm) | Application |
1100, 1050, 1060, 1070, 3003, 3105, 3004, 5052, 8011, | O, H12, H14, H16, H18 | 0.02~4.00 | 5~100 | 75, 150, 300, 400, 500 | Cable, cosmetic cap, aluminum composite, pipe, aluminum hose or tube, electrical transformer, shutter, aluminum battery |
8011, 1235, 1060, 1100, | O | 0.10~0.20 | 100~300 | 75, 150 | Cable Wrapping |
1060, 1100, 8011 | O, H22 | 0.20~1.5 | 30~250 | 75 | Aluminum plastic composite pipe |
1060, 1070 | O | 0.20~2.0 | 100~1200 | 150, 300, 400, 500 | Low voltage electrical transformer |
8011 | H18, H19 | 0.08~0.10 | 140~600 | 75, 150 | Water tank radiator in Automobile |
8011 | O | 0.10~0.13 | 60 | 75 | Aluminum tube for kitchen ventilator |
5052, 3004 | H19 | 0.125~0.25 | 15~100 | 300 | Roller shutter |
3004 | O | 0.25~0.40 | 85~400 | 75, 150 | Aluminum lamp base |
Chemistry Composition & Mechanical Properties:
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | --- | --- | 0.05 | 0.03 | 99.6 |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | --- | --- | 0.05 | 0.03 | 99.5 |
1100 | 0.95 | 0.05-0.2 | 0.05 | --- | --- | --- | 0.1 | --- | 99.0 | |
1200 | 1.0 | 0.05 | 0.05 | --- | --- | --- | 0.1 | 0.05 | 99.0 | |
3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | --- | --- | --- | 0.1 | --- | remainder |
Surface Quality
1. There are no macular or roll marks on the surface of aluminum sheet.Notice: Specific requirement of alloy temper or
thickness can be produced as your request.
2. There is no water corrosion on the surface.
3.The surface of aluminum sheet is very clean without lots of impurities.
Packing: Seaworhty Wooden Pallet. Also, we can do as customers' need.
Loading Port: Qingdao, Port.