Walking Beam Reheating Furnace

China Walking Beam Reheating Furnace, Find details about China Furnace, Industrial Furnace from Walking Beam Reheating Furnace

Model NO.
ND-HF-1250
Package
Stainless Steel
Trademark
Nianda
Transport Package
Steel Sheet
Specification
Custom Design
Origin
China
HS Code
8514901000
Model NO.
ND-HF-1250
Package
Stainless Steel
Trademark
Nianda
Transport Package
Steel Sheet
Specification
Custom Design
Origin
China
HS Code
8514901000
 
1.  furnace duty: 
it is supplied for heating copper inget/slab. 

2. Technical parameters and mechanical components

2.1 Main Technical Parameters

 
No.Name
  
Technical parameters
1DescriptionWalking beam type copper/brass slab heater
2MaterialCopper ,brass,cupro-nickel alloy etc
3Slab size
 
Thickness 160mm160mm
Width 400~420mm400~420mm
Length 3000~4600mm3000~4600mm
Standard Max. weight: 2.75t/piece/(160×420×4600mm)
2.75t/(160×420×4600mm)
4Heating capacityMinium 12t/h, 4slab/h(1slab:160×420×4600mm)
:12t/h  4/h(160×420×4600mm)
5Heating temperature730~750ºC±5ºC(max 850ºC)
6Hearth temperature
()
800~900ºC
7FuelNatural gas
LNG
8Heat value8900Kcal/ Nm3
9Air preheating temperature250~450ºC
10Heat efficiency of the furnace≥45%
11Thermal control patternAuto/ manual,impulse , remote control
,,
12 
 
 
Burner type
Imported flat flame burners of Germany KROM schroder.
heating zone each burner:23 Nm3/h;soaking zone each burner:15 Nm3/h
KROM schroder.23 Nm3/h;15Nm3/h
13Number of burnersTotal: 18 PCS,heating zone:8PCS,
Soaking zone: 10 PCS
18,8,10
14Rated burning capacityMax:334 Nm3/h
:334 Nm3/h
15Dimension of the hearthW5000×H1200×L8000mm
5000×1200×8000mm
16Loading capacity16slabs/batch×2.75t/piece=44t/batch
16/×2.75t/=44t/
17Total length of furnace~11m
~11
18Loading and unloading methodEnd feeding and side discharge
19Loading patternSingle row,3 zones,preheating zone2.5m,heating
zone 3.5m,soaking zone 2m
,, 2.5m,3.5m,2.0m
20Vertical movement of walking
beams:
Lifting: 90mm, 90mm
Lowering: 80mm 80mm
21Horizontal travel of walking beams:500mm
22Heat interchangerHot tubular exchanger
23Heated up time~4 hours
~4
24Quantity of heated up zone3 zones 4sections
34
25Material and spaceSlab: W420mm; slab in furnace:16pcs;
 Gap between slab and slab: 80mm;
Stroke : 500mm
420mm;16;80mm;500mm
 
* Walking Beam Type Slab Heater Technical Data
 
 
Parts NameParametersGuarantee value
&precision value
Remarks
Production
quality
Slab tapping temperature contrast±5ºC 
Slab full-length curvature≤5mm/m 
Surface qualityNo scratches,
,
 
Loading
Device
Loading speed7.5min/time
7.5min/
 
Storing materials≥3 PCS 
Length measuring bias±5mm 
Width measuring bias±3mm 
Charging positioning accuracy±5mm 
Travel route measuring±5mm 
Combustion system

 
Hearth pressure control accuracy±10Pa
±10Pa
 
Furnace temperature control accuracy±5ºC 
Furnace atmosphere
control accuracy
Micro-oxidizingO2≤2% 
Micro- reducibilityCO:0~1% 
Burner Life≥3 years 
Walking beam
Device
Total running deviation(cold)
()
±20mm 
Total running deviation(hot)
()
±30mm 
One walking beam precision±1.5mm 
Furnace shellFurnace wall temperatureMax 45ºC 
Fiber refractory lining life≥5 years 
Bottom furnace refractory life≥5 years 
Unloading deviceFurnace door opening-close time7.5min/time 
Heat
exchanger
Air preheating temperature≥300ºC 
Heat exchanger life≥3 years 
Exchangerflue gas exit temperature≤450ºC 
Cooling waterWater seal yielding water temperatureMax 60ºC 
OthersFurnace output≥ 12t/h 
Sound from 1m from operating point
1
≤85db 
Furnace thermal efficiency≥45%
 
 
 
* Energy and Media Consumption::
 
 
No.ItemConsumption valueRemarks
1Natural gas350Nm3/h
 
Heat value: 8900Kcal/Nm3
8900Kcal/Nm3
2Cycle water12m3/h 
3Soft water4 m3/h 
4Electric5KWh/t 
5Nitrogen12 Nm3/time
12 Nm3/
 
6Compressed air0.2 Nm3/time
0.2 Nm3/
 
 
2.2 Mechanical Components
2.2.1 Furnace shell
Hearth clearance is 5.5 meters width, 1.2 meters height and 8 meters length. Furnace wall, bottom, top consists of steel structure and refractory material. Refractory material adopts high alumina-ceramic fiber modular (thickness: 350mm), and service temperature is 1100 ° C. Those fiber modular is fixed on furnace wall by stainless steel anchor. Main features of the folded modular: stainless steel structure is buried in 2/3 depth of refractory material. (Furnace shell is made of Q235-A steel plate and reinforced by strengthen steel, and continuous sealing welded with each other to guarantee sufficient strength, it provides an adequate rigidity and air tightness structure, which effectively guarantee reliability and longer service life. When installing the fiber blocks, use special tools work to guarantee refractory hermetic. The refractory pre-compression accurate reaches to over 40%, thus reduce the impact of human factors and ensures the construction quality.
A layer of erosion heat resistant adhesive is coated at surface of fiber modular.
Furnace shell steel plate is coated with two layer of antirust paint; after assembling, surface of shell will be painted with silver paint (or paint on request).

2.2.2 Combustion system
Flat flame burner is supplied by Germany manufacturer, totally 18 sets of burners are designed is this slab heater(soaking zone:10 sets, and heating zone: 8 sets). Burners are mounted at furnace roof. Flame forms round shape which has proper radiation capacity, fast heating speed, better temperature uniformity, and little oxidization. Burner is automatically fired, air-gas ratio has large adjusting range, flame automatic detecting. Fire procedures and heating procedures are controlled by PLC.     
2 sets of combustion blowers supply air for the 18 sets of burners. To ensure noise level is less than 85 db (distance:1 meter ), blowers are mounted in a separated room, meet national requirement. Suction port of bowler is designed with air filter, reduce air dust effectively. To minimize vibration, softer rubber pipe links outlet of blower and main air pipe. 

Each LNG burner in soaking zone can produce heat 15×8900 Kcal/ hour. Each burner in heating zone can produce heat 23×8900 Kcal/h.
The combustion system mainly consists of manual valve, filter, pressure relief valve, pressure gauge, fast cut off valve, flow rate regulating valve, flame inspector, igniting solenoid valve, purging system, and burner. Etc. Whole system running procedures are controlled by PLC.

Each zone has separate control valve, and burner impulse controller. Air-gas ratio is regulated at a proper level, so that ensures a perfect combustion result and proper atmosphere, with good temperature control accuracy. 

2.2.3 Walking beam system and water sealed slot
Walking beam system consists of fixed beam, movable beam, hydraulic system and water sealing system.
Fixed beam is divided into center fixed beam and side fixed beam. Center fixed beam
consists of two 1000mm width beams, two fixed beams are designed at each side of furnace hearth. Soaking zone and heating zone fixed beam consists of heat Steel
(ZGCr28Ni48), high alumina quality casting material and insulation light casting material, structure and water cooling system. Preheating zone fixed beam consists of heat steel(ZGCr25Ni35), high alumina quality castables and insulation light castables, steel structure and water cooling system.
3 pieces of walking beams are located in furnace hearth, each width is 500mm, length 14000mm. Walking Beam mainly consists of heat-resistant steel(ZGCr28Ni48), high alumina quality castables, steel structure, and water cooling system. Bottom of this beams are jointed with structure in one. Walking Beam device consists of 2 upward cylinders, 2 horizontal moving cylinders, travel switch and bottom supporting block. The cycle of walking beam operating is: upward, forward, downward, and backward move).  Through walking beam mechanism movements, slab is transferred from entrance into hearth for heating and to the exit, movements is smooth, reliable, simple and practical.
,500mm,14000mm.(ZGCr28Ni48),,..,(,,,).,,,.
Slab with 4000 to 4500mm length, 420mm width can be automatic heated in side of furnace hearth. And for different width of slab, just need adjustment of setting of transistor approach switching.
Walking beams and bottom fixed beam is made of high alumina castables, and
equipped with heat-resistant steel supporting beam, work temperature is 1100 ºC. The upper and lower surface of supporting beam is produced by mechanical processing, assuring slab reliability of operating.
In order to prevent the deformation and prolong service life of beams, all walking-beam and fixed-beam and side beam are equipped with water cooling channels.

At the bottom of each beam is equipped with two Water Seal blades (1Cr13), nearly 14- meter-long Water Seal Blades are inserted in a narrow water trought, walking beam in any state, the furnace and basement furnace are isolated, assuring hearth tightness and favor of reducing heat loss while hearth pressure adjustment.
Water seal device is main component of walking beam. Main function: effectively solve the sealing problem of bottom and furnace. Both entrance and exit of vertical sealing out furnace door is equipped with horizontal and vertical sealing device, form a complete seal ring. The cooling water use cycle water, automatic overflow.(This part of overflow water is a natural return-water; way of settle drainage pattern need plant design)
2.2.4 Surplus heat utilization device
In order to take full advantage of the surplus heat utilization, at the entrance of upper
furnace install one set of  tube type heat exchanger, it's feature is small size, high-efficiency heat exchanging. Wind from combustion fan go through tube ware to take surplus heat from flue gas, then to each combustion air pipe for air preheat temperature ( When flue gas temperature is 600 ~ 700 ° C) is reach to 250~450 ° C, saving fuel, increasing combustion flame temperature, further enhance the slab heating rate, improving energy efficiency of the equipment.

Loading device is composed of centering device, walking beam mechanism, measure device. Loading device of furnace should store 3 slabs. Centering device consists of centering clamping cylinder, centering lifting cylinder, roller table and drive unit, encoder, photoelectric switches and travel switch, Its main function is: after slab moving to roller table, PLC process control automatic finish material measuring (measure unloading material length, width, thickness) and centering.

* Transmission roller speed: 0.15m/sec
* Lifting roller Speed: 0.1m/sec (hydraulic)
* Small walking beam consists of walking beam, store structure, 2 hydraulic cylinder, travel switch. Function is: put slab step into the furnace waiting station, waking stroke is 1000mm.

2.2.6 Unloading device
Pattern of discharging is  side exit out, it consists of inner discharge roller and many outer transfer roller which is placed at furnace side. When require unloading, walking beam upward moving, slab will be delivered to inner discharge roller; furnace door open, walking beam downward move, slab is loaded on the discharge roller (or call it as cantilever roller). Discharge roller transfers slab out of furnace chamber and slab is delivered to outer roller.

2.2.7 In order to better control the furnace atmosphere, zirconia oxygen measurement device is installed in the preheating zone. Operators can check whether the furnace atmosphere meat heating products requirements or not. According to the measured data, automatic or manually complete air-fuel ratio, thus to control furnace atmosphere.

2.2.8 Furnace door and lifting device
It mainly consists of furnace door, lifting device, limit device and water cooling system.

Furnace door shell is welded with steel plate and steel structure, inside lining is made of refractory fiber and inner refectory lining is made of steel fiber castables.  Furnace door is drive by motor, reducer, transmission, chain, and the drive gear, 2 furnace door clamping cylinder connect the sealing blade on the furnace door with sealing ring (aluminum material fiber woven belt ), assuring furnace good air-tightness. End of the chain fixed with sprocket wheel, furnace door downward move depend on its deadweight. Movements of furnace door is controlled by PLC. Furnace Door and structure use water cooling structure, preventing deformation of the structure, effectively assuring hermetic, Furnace Door lifting speed: ~ 0.02m/s/0.16m / s. And furnace is equipped with ladder, maintenance table and maintenance platform and fence.