Boat floating jetty Modular Plastic HDPE Jetski Dock for Sale 

1. Floating cubes Raw material is high-density polyethylene (HMWHDPE), Corrosion resistant, antifreeze, antioxidant, anti violet lines of reinforced material, free from sea water, chemicals, chemicals, oil stains and water biological erosion; no pollution, no pollution to the environment.
2. Floating cubes top surface is anti-skid design, security and stable; Four corners are arc obtuse angle shape, avoid cement, wood, iron facilities common danger, for example: slip, broken wood, rusty nail stab etc.
3. with high capacity, floating pontoon are stable, long time service, the each square meter buoyancy can reach 350kg.
4. The Floating cubes service life can reach 8-15 years, In addition to the strong natural and man-made improper use, no need any maintenance, maintenance costs.
5. assembly is simple, fast, flexible and diverse modeling, adopts module structure, can change the platform according to the requirements. The floating pontoon with bright colors, good shape, suit for different needs
6. The cost is reasonable and economical. It can save a large amount of maintenance, maintenance, replacement, overhaul costs and time.
7. Have many different accessories, such as mooring bollards, anti-thrombus, billiards, guardrail, landing ladder, can berthing different small and large ship; and because of the characteristics of water floating platform on the buoyancy, it can floating up and down according to the water level. Passengers can on board embarkation and disembarkation safety and comfort.

Floating pontoon quality parameters:
1. The service life of the floating pontoon: 8000 hours under the ultraviolet detection of xenon lamp, the national standard for plastic aging;
2. Diagonal pulling force of floating pontoon: not less than 26KN;
3. Flat angle pulling force of floating pontoon: not less than 33KN;
4. The eight major heavy metals have reached the national standards and have no pollution to water quality.
5. The ear thickness of the floating box is 2 cm.

1. Every pontoon has four lugs. Each lug is marked with 1,2,3 and 4. Put pontoons in the same direction.(According to the logo on surface or the hole in side).                          
2. Insert connecting pin into the hole of the over-lapping lugs and knock it into place by rubber hammer.
3. Use wrench to turn the connecting pin 45 degrees.