High Technology and Environment Friendly Waste Tire Pyrolysis Recycling Machine

The waste tire oil refining equipment will split the waste tire at high temperature to obtain tire oil, carbon black and steel wire, so as to realize the maximum recycling of waste resources. This series of refining equipment is an environmental friendly and pollution-free thermal cracking treatment method for waste tires. Lifeier Shangqiu Branch is a professional technology production enterprise, which has been focusing on the effective utilization of waste for many years. The reaction kettle is made of professional boiler plate steel Q345R, 16 / 18mm thick. The cooling effect of the box cooler in the operation process of the equipment can reach 180m, and the oil yield can reach 40% - 45%.

2.Working principle of

20(Lengthen)x15M(width)x8M(Height) You also need prepare the feeding area, about 20M2

4.At present, the pyrolysis plant is divided into three types: batch type, semi-continuous, and continuous type.
1).Batch Type Waste Tyre Pyrolysis Machine:

Performance Feature

• Whole tyre feed,no need to break, which reduces cost.
• Adopt multilevel cooling circulation to get more fuel oil.
• Discharge process through pulse dust removal processing,no dust emissions.
• Easy operation,high efficiency and 2-3 people to operate.
• Plant adopts fully automatic submerged arc welding process,through x-ray detection, to improve the security of plant.

• Tyre transported to reactor by conveyor to pyrolyze.
• Oil and gas from pyrolysis go into gas-liquid separating tower and separate, and enter into condenser to liquify , to get fuel oil, then enter into oil storage tank.
• Coarse carbon black and steel wire from pyrolysis are output by automatic slag remover, transported to carbon black processing system by cooling hoist. Separate steel wire and carbon black through the magnetic separator,to get  industrial carbon black and steel wire.
• Steel wire pulled out by winch,compressed into pieces,and do steel scrap process.
• Flammable gas enter into waste gas tank and processed. Then extracted by vacuum pump, enter into water sealed tank and send to hot air furnace to b

2).Semi Continuous Waste Tyre Pyrolysis Plant:
Performance Feature

• Integral design, no need to precast foundation, quick and easy installation.
• Airtight high temperature material feed, saving heating time and reduce the temperature loss.
• Adopt multilevel cooling design to get more fuel oil.
• Hot air heating, unique heat cycle design, heated more evenly, reducing the operating cost.
• Airtight high temperature slag, no dust, clean and environmentally friendly.

• Broken tyre transported to feeder firstly by conveyor, then to reactor.
• Oil and gas from pyrolysis go into gas-liquid separating tower and separate, and enter into condenser to liquify , to get fuel oil, then enter into oil storage tank.
• Coarse carbon black and steel wire from pyrolysis are output by automatic slag remover, transported to carbon black processing system by cooling hoist. Separate steel wire and carbon black through the magnetic separator,to get  industrial carbon black and steel wire. 
• Shatter carbon black, to get industrial carbon black after deeply processing. Steel wire compressed into a piece of scrap processing.
• Flammable gas enter into waste gas process tank to desulfur. Then extracted by vacuum pump, enter into water sealed tank and send to hot air furnace to burn.

3).Fully Continuous Waste Tyre Pyrolysis Plant:
Performance Feature

• Internal screw rotatory pyrolysis. No coking.
• Hot melt processing in advance, process generated HCL specially, more environmental protection.
• Adopt multilevel cooling design, to get more fuel oil.
• Hot air heat, cooperated with low temperature pyrolysis catalyst, extend working life of plant.
• Enclosed production all the way, no leakage and no dust loss, environmental protection.
• Exhaust gas multistage processed, gas discharge reach European Standard level.

• Waste tyre and medical waste sent into fuel preheater by conveyor to melt. Process generated HCL specially.  
• Melted fuel continuously sent into reactor, and finish pyrolysis under low pressured catalyst.
• After generated gas during pyrolysis separates in gas-liquid separator, liquify in condenser and get fuel oil. After fixed bed second catalyst and dewaxing , can get the fuel oil with high quality.
• Carbon residue after pyrolysis output continuously by cooling conveyor, and made to be carbon rod as fuel.
• Flammable gas goes into exhaust gas treatment tank to desulfur, then extracted by vacuum pump and enter into water sealed tank, sent to hot air stove to burn.

5.Raw materials:

Waste tire	40-45%	Steel tire, canvas tire, etc. the engineering tire is large in size and needs to be cut, broken and then cracked
Waste rubber	35%	Such as rubber cable leather, rubber sole, conveyor belt, rubber track, etc.
Waste chemical fiber carpet	30%
PMMA	80-85%	Plexiglass, acrylic, etc
PE material	95%	Industrial packaging film, pharmaceutical and food packaging film, daily necessities, building materials, wires, cable insulation skin, etc
PP material	90%	Woven bags, packing bags, injection products such as food utensils, basins, barrels, bottle caps, car bumpers, etc
PS material	90%	CD, CD case, tape case, foam product, home appliance shell, etc.
ABS engineering plastics	40%
Sludge	70-80%	Oil-fiele contaminated soil
Aluminum plastic	It depends on the raw material	All kinds of food,mediicine packing bags,precision electronic board anti-static packing,color printing factory materials.
Waste clay	40-70%	All kinds of waste white soil filtered through oil.
Circuit board	10-35%	Various electronic products
Capacitance	5-30%	Various electronic products
Coal tar	It depends on the quality	The viscous liquid produced during coal distillation.
Note: 1. PVC and PET materials are not easy to refine 2. The oil delivery rate of big car tire is slightly higher than that of small car tire 3. The oil yield of the materials listed above are all laboratory data, and the raw materials are dry, clean and free of other inorganic materials (water content, inorganic impurity content are not more than 5%) test data.

Product Output Rate:
1. Fuel Oil: 40-45%
2. Carbon black: 35-40%
3. Steel wire: 15-20%
4. Flammable gas: 5-10%
Product Output Uses:
1. Fuel Oil:
1).Heating material:sell to cement factory, glass factory, ceramic factory, electric power factory, steel making factory, boiler factory, etc. 
2).Used for heavy oil generator for electricity generation. 
3).Deep process it into diesel oil then can be used in cars,trucks, tractors, etc.
2. Carbon black:
1).Make it into pellet or briquette as heating material. 
2). Make it into N220, N330, N550 or N660 which is widely used in tire making industry. 
3). Make it into plastic grains then sold to plastic industry.
3. Steel wire:
1). Sell it to iron and steel factory directly. 
2).Sell it to steel distributors.
4. Flammable gas:
1). Recycled into furnace to heat reactor instead of coal/wood/oil/natural gas. 
2).Store it then supply the pyrolysis equipment heating,it's recycling.
6.Profit Analysis for your reference:
Note:A . This analysis is made with capacity of 10tons tire per day per batch.
         B. Please modify relative prices according to your actual market conditions.

NO.	ITEM	DETAILS
1	Daily Capacity	10TPD
2	Raw Materials	Waste tire
3	Cost of tires	10T*1000¥/T=10000¥
4	Fuel Cost	0.45T*1200¥/T=540¥
5	Labor (Daily)	3P*200¥/D/P=600¥
6	Electricity & Water	200¥
7	Other	100¥
8	Total Cost	11440.00¥
9	Oil Income	10T*40%*2500¥/T=10,000.00¥
10	Steel Tire Income	10T*15%*2600¥/MT=3,900.00¥
11	Carbon Black Income	10T*35%*300¥/T=1,050.00¥
12	Gross Income	14,950.00¥
13	Daily Net Income	14,950.00¥−11,440.00¥=3,510.00¥
14	Monthly Net Income	3,510/Day*25D=87,750.00¥
15	Yearly Net Income	87,750.00¥/M*11M=965,250.00¥

For packaging and shipping,we need to one 40'FR for the reactor,and the other 40'FR for the horizontal cooling condenser,40'HQ containers is to load oil tank,dedust device and other spare parts.The reactor is about 7500mm*3200mm*3200mm.It is doable to take 40FR.It is over width and over height.The horizontal cooling condenser isi 6000mm*3000mm*1800mm,have good performance for cooling oli gas.It's proper for using 40'FR.We also can design vertical cooling condensor for you,pack in 40'HQ,it's according to your request.

Outstanding Features:
1.High Efficiency

Installation, Guarantee and Sales-after service:
(1) Installation and Commissioning: The seller shall send at least one engineer to the buyer's assigned place at agreed time by both parties to conduct installation, commissioning and training of sold machines. The cost which may be including salary of 150USD per day, Accommodation, Round tickets, Meals, Transportation, Essential tools etc. during engineer service process shall be borne by the buyer. Seller should burden the visa application, but buyer should help on the documents, etc.
 
(2) Guarantee of quality: The Seller shall guarantee that the goods are made of the best materials and of first class workmanship, brand new, and comply in all respects with the quality and specifications and performance as stipulated in this Contract. The Seller shall guarantee that the goods, when correctly installed, properly operated and maintained, shall give satisfactory performance for a period of 12months after the day of completion of installations. Human faults or wearing parts not included in the quality guarantee.

(3)Coverage:The warranty foresees the supply, free of charge, of the parts of the machine that get broken due to manufacturing defects.The warranty does not cover damages and/or loss of production due to machine stops or for the bad running caused by the damage. 
The warranty does not cover the time required for the arrival of the new parts.

Special offer :The seller shall provide genuine parts with cost price and thchnical support for free in its whole lifespan.

1.What is our Qualification?
We are professional waste tyre and plastic pyrolysis plant manufacturer, with more than 10 years' and 20 years' boiler manufacture experience.
2.What kind of raw material to recycle? 
We specialized in manufacturing pyrolysis plant for waste tyre/waste plastic/waste oil slugge, MSW etc 
Tires for car, truck, motorbike...
Plastic of PVC,PE, PP,PS,ABS,bags,acrylic, rubber, medical waste, oil sludgeindustrial waste material...
3.How many countries we have exported?
Our product have been successfully exported and Installed in India,USA,Brazil,Russia,Turkey,Egypt,Nigeria,Thailand,Indonesia,Australia,England etc.
4.What is our Warranty Period?
The Warranty Period is ONE YEAR with lifelong service and 24 hours online service.

Quotation&Offer:
We supply customized plant,we need some basic information. To choose the waste tire pyrolysis equipment and offer a proper quotation for you ,kindly confirm following questions:
1.Raw material :Waste tyre or plastic ?
2. What's the burning material ?(Choose wood, coal, oil or natural gas as combustion materials,which one?)
3.Production capacity ? (ton /day)  
4.What kind of pyrolysis equipment?(Batch or Semi-Continuous Type?)
5.The final product will be used for?
6.What's the voltage in your country?
7.What's the environmental standard  in your  country?
8.Other special requirements.
9.What's your plan for this project ? 

If you want to know more information about the pyrolysis plant and other machinery, pls do not hesitate to contact us.Hope to have the chance to coorpation with you in the future.