CR5012 Card reader series
- Category:ISO14443 TYPE A Reader
- Product number:CR5012
Specification
•32-bit reduced instruction set computer (RISC) architecture
• On-chip, 16K Bytes of static random-access memory (SRAM):
Single cycle byte, half-word (16-bit), and word (32-bit) reads and writes
• On-chip, 16K Bytes of static read only memory (ROM):
Single cycle byte, half-word (16-bit), and word (32-bit) read access.
• On-chip 256K Bytes embedded flash (EFLASH)
• USB Controller:
- USB 2.0 Compliant with on-chip integrated PHY module
- Certified for High Speed (480MHz) USB and Full Speed (12MHz) USB
- UTMI+ Level 2 transceiver interface
- Supports eight transmit/receive
endpoints(ep0,ep1,ep2,ep3,ep4,ep5,ep6,ep7)•Aes, RSA, Des Jet Fast to visit ULtralgith C, Mifare plus cards
PC/SC MODE support TYPE A B ISO14443-4
•NXP RC523 Reader IC, support TYPE A ,TYPE B
2. Technical
Power supply: 3V or 5V, 40-80mA
Interface: UART ,USB HID ,USB virtual RS232 , USB CCID, USB emulation Keyboard
Options;
Transmission speed: Default 19200 bps
R/W distance of up to 60mm ~ 100mm ,depending on TAG and Antenna Size.
Storage temperature: -40 ºC ~ +85 ºC
Operating temperature: -25 ºC ~ +70 ºC
CR6403 Plus TYPE A support mifare 1k ,4k,ultralight ,ultralight C,Ntag serial,
Sle66r01P, mfiare plus ,Desfire Pipe mod , C =TL 14443-4
TYPE B C=TL 14443-4
TWO SAM SLOT Support T=0 T=1 3v 5V Smart card
Support Card :
CR5012A Plus : ISO14443A , Mifare 1k ,4k ,ultralight ,Ultralight EV1, Ultralight C
SLE66R01P ,Ntag203,Ntag213,Ntag215,Ntag216, C=TL