Products

Closed-Cup Flash Point Tester for Petroleum Products (Pensky-Martins method)

China Closed-Cup Flash Point Tester for Petroleum Products (Pensky-Martins method), Find details about China ASTM D93, Closed Cup Flash Tester from Closed-Cup Flash Point Tester for Petroleum Products (Pensky-Martins method)

Model NO.
HK-261
Ignition Gas Supply
Pipeline Coal Gas, Liquid Gas, and Gas Pressure Le
Ambient Requirements
Temperature: 20~30°c; Humidity≤85%
Trademark
HK
Transport Package
Wooden Case
Specification
330× 245× 210(mm)
Origin
China
HS Code
9027809990
Model NO.
HK-261
Ignition Gas Supply
Pipeline Coal Gas, Liquid Gas, and Gas Pressure Le
Ambient Requirements
Temperature: 20~30°c; Humidity≤85%
Trademark
HK
Transport Package
Wooden Case
Specification
330× 245× 210(mm)
Origin
China
HS Code
9027809990
 Closed-Cup Flash Point Tester for Petroleum Products (Pensky-Martins method)
 
Introduction

HK-261 Closed-cup flash point tester for petroleum products(Pensky-Martin  method) (Basic  model)conforms to GB/T261 & ASTM D93 standards. It is used to test the flash point of fuel oil,lubricating oil and so on under certain experimental condition.
 
Structure
 
1. Upper cover with a standard fireball comparator, easy  to  operate. 
2. Heating with stepless voltage regulator, heating-rate is even. 
3. Stainless steel heater, safe and reliable. 
4. Electrical motor to agitate oil sample makes the temperature of oil sample up equability. 
5. The instrument is designed rationally, has attractive appearance and easy to operate. 
 
 
Technical parameters
 
1. Rated voltage: AC220V±10% 50Hz. 
2. Temperature range: 40~300°C 
3. Heating power: 0~1000W    (Continuously adjustable). 
4. stirring way: Motor stirrer, 105r/min. 
5. Ignition gas: Pipeline coal gas, Liquid gas, and gas pressure less than 10Kpa. 
6. Ignition way: manual type. 
7. Ambient temperature: 20~30°C   Humidity≤85%
Closed-Cup Flash Point Tester for Petroleum Products (Pensky-Martins method)

You Might Also Like