Manufacturing Precision Standards : Japanese JIS 1 Class
1. Parameters
1.1 80ton-160ton
| Name | Unit | XPD-80 | XPD-110 | XPD-160 |
| Model | | V | H | V | H | V | H |
| Capacity | Ton | 80 | 110 | 160 |
| Rated tonnage point | mm | 4 | 2 | 6 | 3 | 6 | 3 |
| Stroke | mm | 150 | 70 | 180 | 80 | 200 | 90 |
| Die height | mm | 340 | 380 | 360 | 410 | 460 | 510 |
| Stroke per minute | s.p.m | 35-80 | 80-120 | 30-60 | 60-90 | 20-50 | 40-70 |
| Slide adjustment | mm | 80 | 80 | 100 |
| Slide area | mm | 560x420x70 | 650x470x80 | 700x550x90 |
| Bolster area | mm | 760x550x90 | 900x600x110 | 980x880x140 |
| Main motor | kwxp | 7.5x4 | 11x4 | 15x4 |
| Slide adjust device | HP | Electrical driving |
| Air pressure | kg/cm2 | 6 | 6 | 6 |
| Presses dimension | mm | 1300x1890x3000 | 1420x1985x3200 | 1600x2200x3500 |
| Presses weight | Ton | 7.8 | 10.5 | 17.8 |
| Presses precision | | GB(JIS)1 class |
| Die cushion capacity | Ton | 3.6 | 6.3 | 10 |
| Stroke | mm | 70 | 80 | 80 |
| Die cushion effective area | mm2 | 450x310 | 500x350 | 650x420 |
1.2 200ton-315ton
| Name | Unit | XPD-200 | XPD-260 | XPD-315 |
| Model | | V | H | V | H | V | H |
| Capacity | Ton | 200 | 260 | 315 |
| Rated tonnage point | mm | 6 | 3 | 7 | 3.5 | 7 | 3.5 |
| Stroke | mm | 200 | 100 | 250 | 150 | 280 | 170 |
| Die height | mm | 460 | 510 | 500 | 550 | 550 | 600 |
| Stroke per minute | s.p.m | 20-50 | 50-70 | 20-40 | 40-50 | 20-35 | 30-50 |
| Slide adjustment | mm | 110 | 120 | 120 |
| Slide area | mm | 850x630x90 | 950x700x100 | 1000x750x110 |
| Bolster area | mm | 1140x820x160 | 1500x840x180 | 1600x900x200 |
| Main motor | kwxp | 18x4 | 22x4 | 30x4 |
| Slide adjust device | HP | Electrical driving |
| Air pressure | kg/cm2 | 6 | 6 | 6 |
| Presses dimension | mm | 1750x2500x3900 | 2080x2895x4470 | 2100x2925x4550 |
| Presses weight | Ton | 25.3 | 37 | 42 |
| Presses precision | | GB(JIS)7 class |
| Die cushion capacity | Ton | 14 | 14 | 14 |
| Stroke | mm | 100 | 100 | 100 |
| Die cushion effective area | mm2 | 710x480 | 810x480 | 810x480 |
Product Features:
* With high rigidity rack design, they are welded with the use of high-quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Consistent driving center and machine center to guarantee accurate and stable punching.
* In order to guarantee relative stationarity of machine operation, it is equipped with two balancers.
* Moulding-adjustment precision is as high as 0.1mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally top duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.
Standard Configuration:
* Inverter
* Hydraulic overload protector
* Electric slider adjusting device
* Electric moulding-height indicator
* Slider and mould balancing device
* Misfeed detection consent
* Power socket
* Rotary cam switch
* Crank angle indicator
* Counter
* Air source connector
* Over-run safety device
* Maintenance tool and tool box
* Operating manual
Optional Configuration:
* Auto grease pump device
* Air die cushion device
* Preset counter
* Preset counter
* Foot switch
* Quick die change device (Die lifter, die clamper, or mould-shift arm)
* Knock out device on the slider
* Anti-vibration foot
* Photo-electric safety device
* Feeder (air, machinery, NC,and servo )
* Feeding rack
* Leveller
* Manipulator (Bar Feeder )
* Die Room Light
* Left (right) feeding device
* PAC100 control system
* Man-machine control system