Products

High Performance Cold Shrink Tubing for Power Cable and Rru Connections

China High Performance Cold Shrink Tubing for Power Cable and Rru Connections, Find details about China Cold Shrink Tubing, Silicone Rubber Cold Shrink Tubing from High Performance Cold Shrink Tubing for Power Cable and Rru Connections

Model NO.
CST12
Trademark
HarshSeal
Origin
China
HS Code
8547200000
Model NO.
CST12
Trademark
HarshSeal
Origin
China
HS Code
8547200000
Cold Shrink Tubing Coax Connector Sealing Kits CST12 Series
High Performance Cold Shrink Tubing for Power Cable and Rru Connections
Description

CST12 series provide the correct Cold Shrink Tubing or the correct Cold Shrink Tubing and special foam to make the installation of coax connector seals easy. The installation does not require tooling, and the quality of the installation is less installer dependent.
Applications
The main application is the sealing of coax connectors used in the wireless communication antenna market. These mainly outside installed connectors require an extra sealing. 
High Performance Cold Shrink Tubing for Power Cable and Rru Connections 
Technical Information

The outer Cold Shrink Tubing is made from UV resistant EPDM or Silicone rubber material to provide an excellent seal on the connector. In cases where the different coax cable diameter can not be covered with the tube application range, a special foam is used to increase the smallest cable diameter to fit the shrink performance of the Cold Shrink tube.

Selection Table
 
Part#Supported Coax SizesMaterialApplication RangeConnectors Type
CST12D  1/2" Jumper Cable to Antenna Connections, 1/2" Cable to 1/2" Cable ConnectionsSilicone Rubber / EPDM Rubber      13 - 39
 		7/16 DIN, N type & Mini Din 4.3-10 & 4.1-9.5
CST12MD1/2" Jumper Cable to Antenna Connections, 1/2" Cable to 1/2" Cable ConnectionSilicone Rubber/ EPDM Rubber       13 - 27Mini Din 4.3-10 & 4.1-9.5
CST1278MN½" Jumper Cable to 7/8" Feeder Cable Connection,
5/8"Cable  to 7/8" Cable Connections
 		EPDM Rubber       13 - 49   7/16 DIN & N Type
CST12158MN1/2" Jumper Cable to 1-1/4" or 1-5/8" Feeder Cable Connections
5/8" Jumper Cable to 1-1/4" or 1-5/8" Feeder Cable Connections		EPDM Rubber       13 - 67.87/16 DIN & N Type
 High Performance Cold Shrink Tubing for Power Cable and Rru Connections
Typical Properties(Mechanical & Electrical)
EPDM Rubber
PropertiesTypical DataTest Method
300% Modulus4.7Mpa ASTM D 412-75
Ultimate Tensile Strength11.8 MPaASTM D 412-75
Utimate Elongation750%ASTM D 412-75
Tear Strength38.6N/mmASTM D624C-73
Dielectric Strength19.1KV/mmASTM D149-75
Moisture AbsorptionWeight gain 1.8%7 days, 90°C, HO
UV Resistance2,000hrs, UVB-313 fluorescent lamp, exposureASTM G-53
 
Typical Properties(Mechanical & Electrical)  
Silicone Rubber
 
PropertiesTypical DataTest Method
Hardness49 Shore AASTM D2240
Tensile Strength11.8 MPaASTM D 412-75
Elongation at Break641%ASTM D 412-75
Tear Strength38.6N/mmASTM D624B
Dielectric Strength19.1KV/mmASTM D149
Specific Gravity1.23/
High Performance Cold Shrink Tubing for Power Cable and Rru ConnectionsHigh Performance Cold Shrink Tubing for Power Cable and Rru Connections

You Might Also Like