Big ADSS Cable Fiber Clamp PA-3000
China Big ADSS Cable Fiber Clamp PA-3000, Find details about China Anchoring, Overhead from Big ADSS Cable Fiber Clamp PA-3000
Basic Info.
Model NO.
PA-3000
Trademark
no
Transport Package
Carto
Specification
plastic
Origin
China
Model NO.
PA-3000
Trademark
no
Transport Package
Carto
Specification
plastic
Origin
China
Product Desciption
FOR ADSS CABLES INSTALLED ON SHORT SPANS (100M MAX)
PRODUCT OVERVIEW
These clamps are designed for dead-ending aerial ADSS cables on access networks when spans do not exceed 100m. Different capacities are available to adapt to the cable Ø.
APPLICATION
These clamps will be used as cable dead-end at end poles (using one clamp).Two clamps can be installed as double dead-end in the following cases :
• at jointing poles
• at intermediate angle poles when the cable route deviates by more than 20°.
• at intermediate poles when the two spans are different in lengths
• at intermediate poles on hilly landscapes
FEATURES
• Dead-ending of 6 to 20 mm ADSS cables
• Minimum breaking load of 500/600 daN
• Installation on any pole hardware fitting :
brackets, cross-arms or eye bolt with a min eye Ø of 15 mm
• 4kV thimble as standard. 11 kV thimble available
• All plastic parts are UV resistant and tested in conditions equivalent to min 25 years of service in tropical environment
DESCRIPTION
These anchoring clamps are made of an opened conical body, a pair of plastic wedges and a flexible bail equipped with an insulating thimble. The bail can be locked onto the clamp body once passed through the pole bracket and re-opened by hand at any time when the clamp is not under full load. All parts are secured together to prevent any loss during installation.
Range
PRODUCT OVERVIEW
These clamps are designed for dead-ending aerial ADSS cables on access networks when spans do not exceed 100m. Different capacities are available to adapt to the cable Ø.
APPLICATION
These clamps will be used as cable dead-end at end poles (using one clamp).Two clamps can be installed as double dead-end in the following cases :
• at jointing poles
• at intermediate angle poles when the cable route deviates by more than 20°.
• at intermediate poles when the two spans are different in lengths
• at intermediate poles on hilly landscapes
FEATURES
• Dead-ending of 6 to 20 mm ADSS cables
• Minimum breaking load of 500/600 daN
• Installation on any pole hardware fitting :
brackets, cross-arms or eye bolt with a min eye Ø of 15 mm
• 4kV thimble as standard. 11 kV thimble available
• All plastic parts are UV resistant and tested in conditions equivalent to min 25 years of service in tropical environment
DESCRIPTION
These anchoring clamps are made of an opened conical body, a pair of plastic wedges and a flexible bail equipped with an insulating thimble. The bail can be locked onto the clamp body once passed through the pole bracket and re-opened by hand at any time when the clamp is not under full load. All parts are secured together to prevent any loss during installation.
Range
| Clamp Type | Capacity(mm) | Min breaking load(Kn) |
| PA-3000(8-12) | 8-12 | 6 |
| PA-3001(12-16) | 12-16 | 6 |
| PA-3002(16-20) | 16-20 | 6 |
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......