Pd90 Excavator Mounted Diameter 38-102mm Rock Drill

China Pd90 Excavator Mounted Diameter 38-102mm Rock Drill, Find details about China Hydraulic Excavator, Excavator Mounted from Pd90 Excavator Mounted Diameter 38-102mm Rock Drill

Drill Speed
500-1000mm/Min
Lowest Horizontal Hole Height
250mm
Once Propel Travel
3m
Compressor Type
1.8m3-3.2m3
Drifter Weight
90kg
Whole Weight
1.2t
Trademark
PRODRILL
Transport Package
Standard Package
Specification
CE, SGS
Origin
China
HS Code
82071990
Drill Speed
500-1000mm/Min
Lowest Horizontal Hole Height
250mm
Once Propel Travel
3m
Compressor Type
1.8m3-3.2m3
Drifter Weight
90kg
Whole Weight
1.2t
Trademark
PRODRILL
Transport Package
Standard Package
Specification
CE, SGS
Origin
China
HS Code
82071990
2020 Top Quality Excavator Mounted Pd-Y90
Pd90 Excavator Mounted Diameter 38-102mm Rock Drill

Excavator mounted rock drilling attachments are designed to be used in various job sites such as drilling and blasting, quarrying & Mining, rock bolting, rock and concretre demolition, construction works, etc. ProDrill rock drills' percussion hour to engine hour ratio is exceptionally good at 60 %, which is substantially higher than what can be achieved with conventional drilling rigs. This is best proven in difficult conditions where other solutions fail to drill holes without the exceptional reach of the excavator's boom.

Besides demanding conditions, ProDrill Excavator Drill can also be used as hydraulic rock splitter to demolish over sized rock bad and huge concrete building removal.

1. Excavator Mounted Drill Rig
1 meter per Min
Excavator mounted rock drilling attachments are designed to be used in various job sites such as drilling and blasting, quarrying & Mining, rock bolting, rock and concretre demolition, construction works, etc. ProDrill rock drills' percussion hour to engine hour ratio is exceptionally good at 60 %, which is substantially higher than what can be achieved with conventional drilling rigs. This is best proven in difficult conditions where other solutions fail to drill holes without the exceptional reach of the excavator's boom.
A. QL-Y90 EXCAVATOR MOUNTED HYDRAULIC DRILL RIG

FOCUS ON BIG HOLE


2-3/, .
QL-Y90, 38-89mm, , QL-Y90.
Drilling speed can up to 2-3 meters per minute, but don"t need a big compressor.
The drill hole diameter of QL-Y90 excavator mounted hydraulic drill rigrange from 38 to 89 mm, it is the best choice for the big hole.
B. QL-Y45 EXCAVATOR MOUNTED
HYDRAULIC DRILL RIG
 products type PD-Y90
 available rigidity rockF=6-20
 drill scope 38-89mm
 drill speed500-1000mm/min
 lowest horizontal hole height250mm
 once propel travel3m
 oil pressure≤19Mpa
 compressor type 1.8m3-3.2m3
 size 7488*140*252mm
 drifter weight115kg
 whole weight1.2t