China High Quality Thinner CATV RF Amplifier, Find details about China CATV RF Amplifier, RF Amplifier from High Quality Thinner CATV RF Amplifier
Performance Characteristics
1.1003MHz bandwidth design.
2.Forward path: The pre-stage adopts GaAs MMIC, output stage adopts the newest imported high index power doubler module, achieve high output level, low distortion and high SNR.
3. It is more convenient to debug because of the plug-in duplex filter, equalizer, attenuator, output tap and the scientific and reasonable on-line detection ports.
4.The equipment can long time continuous work steadily under outdoor bad environmental condition. Because of thealuminum waterproof housing, high reliability switching power supply and strict lightning protection system.
Technique Parameter
Item | Unit | Technical Parameter | |
Forward Path | |||
Frequency range | MHz | 45 (87) ~ 862/ 1003 (optional) | |
Rated gain | dB | 36 | |
Rated input level | dBμV | 72 | |
Rated output level | dBμV | 105 | |
Flatness in band | dB | ±0.75 | |
Noise figure | dB | ≤10 | |
Return loss | dB | ≥16 | |
C/CTB | dB | ≥65 | Output level 105 (EQ10dB) |
C/CSO | dB | ≥65 | |
Group delay | ns | ≤10 (112.25 MHz/116.68 MHz) | |
Signal to hum ratio | % | < 2 | |
Gain stability | dB | -1.0 ~ +1.0 | |
Return Path | |||
Frequency range | MHz | 5 ~ 65 | |
Rated gain | dB | 18 (Different modules, different gain. Can be specified by the users.) | |
Flatness in band | dB | ≤±0.75 | |
Noise figure | dB | ≤8 | |
Return loss | dB | ≥16 | |
Signal to hum ratio | % | < 2 | |
General Performance | |||
Characteristic impedance | Ω | 75 | |
Power supply voltage | V | A: AC (150~250)V; B: AC (35~90)V | |
Impulse withstand voltage | kV | > 5 (10/700μs) | |
Power consumption | W | ≤20 | |
Dimension | mm | 220 (L)* 205 (W)* 65 (H) |