High Sensitivity Automation Street Lighting Management System Gateway
China High Sensitivity Automation Street Lighting Management System Gateway, Find details about China LED, LED Light from High Sensitivity Automation Street Lighting Management System Gateway
Basic Info.
Model NO.
WE-GW-10
Task
Adjust
Structure
Open-Loop
Mathematical Model
Linear
Signal
Continuous
Function
Automatic Control
Certification
RoHS, CE
Condition
New
Customized
Customized
Material
Aluminum Alloy
Trademark
honor insight
Transport Package
Carton
Specification
270*270*103(mm)
Origin
Shenzhen China
HS Code
8517629900
Model NO.
WE-GW-10
Task
Adjust
Structure
Open-Loop
Mathematical Model
Linear
Signal
Continuous
Function
Automatic Control
Certification
RoHS, CE
Condition
New
Customized
Customized
Material
Aluminum Alloy
Trademark
honor insight
Transport Package
Carton
Specification
270*270*103(mm)
Origin
Shenzhen China
HS Code
8517629900
Product Desciption
High Sensitivity Automation Street Lighting Management System Gateway
1.1 Brief introduction:
WE-GW-10 gateway is a full-duplex data communication industrial-grade outdoor gateway based on LoRaWAN protocol, which is of high-performance, low-power and wide range networking. It is waterproof and of wide voltage input to be the key equipment for building low-power WAN. It can support all kinds of equipments two-way wireless communication services, LoRaWAN, 2G/3G/4G wireless communication and 100M Ethernet wired communication. It can also meet the networking requirements of high-speed communication, low power consumption, and many nodes access. More importantly, this industrial-grade communication device can work stably in harsh environments so it is an ideal gateway to apply to smart lighting, smart city, smart community, smart bus station and other fields when supports frequency bands of CN470-510, US915, AU915, AS923, KR920, IN865.
1.2 Features:
12V~36V wide voltage DC input
- Follow LoRoWAN wireless transmission protocol to support transmission and reception of full-duplex LoRa communication
- Support multiple network access methods such as 2G/3G/4G and LAN
- Adaptive data transfer rate
- Output power up to 23dBm
- Sensitivity dropped to -142.5dBm
- Support 8 channels of concurrent, the number of accessible nodes is up to 2000
- The farthest transmission distance is 15Km (line of sight), 2Km (city distance)
- Supports various operating frequencies such as CN470MHz/US915MHz/EU868MHz
- Effective lightning protection grounding protection
1.3 Performance parameters:
| Communication parameters | Notes |
| Operating frequency | CN470MHz/US915MHz/EU868MHz |
| Transmit power | < 23dBm |
| Receive sensitivity | > -142.5dBm |
| Transmission distance | City: 2Km line of sight: 15Km |
| Access method | LAN, 2G/3G/4G |
| Data Protocol | UDP/TCP/MQTT |
| LoRa antenna | T-NC female interface |
| 4G antenna | T-NC female interface |
1.4 Hardware parameters
| Hardware parameters | Notes |
| Supply voltage | 12V~36V Recommended: 12V/1A |
| Power consumption | <1W |
| Working temperature | -40~80°C |
| Network / power interface | RJ45 + DC |
| Waterproof rating | IP66 |
1.5 Structural parameters
Weight: 2850gSize: 640x340x103 (mm)
2.2 Accessory schematic diagram
2.3 Schematic diagram after installation
2.4 Sim card installation
2.4.1 Unscrew and open the gateway
2.4.2 Find the SIM card holder location
2.4.3 Insert the sim card
2.4.4 Close the gateway and tighten all the screws
2.5 Antenna installation
2.5.1 LoRaWAN has 2 antennas of different lengths, and the short is 4G antenna, which is connected to the right side of the front of the gateway. The long is the LoRaWAN antenna, which is connected to the left side of the front of the gateway. As shown below:
2.6 Ethernet connection
Plug the network cable into the gateway line.
2.7 Adaptor connection
WE-GW-10 is typically used in complex external environments. In order to adapt to the complex application environment and improve the stability of the system, the gateway uses advanced power technology. Users can either use the standard 24VDC/2A power adapter or directly use the DC 12~36V power supply to power the gateway. If user use external power supply, the stability of the power supply must be ensured (the ripple should be less than 300mV and the instantaneous voltage does not exceed 36V), and the power of supply should be bigger than 5W. A standard 24VDC/2A power supply is recommended.
3. Operation
After the above installation, the gateway can be powered on normally, and the user can grasp the running status of the gateway according to the indicators of the gateway.3.1 Power-on
The indicator light is red during the power-on of the gateway.
3.2 Networking connection
When the network is connecting, the indicator light flashes blue.
3.3 Successful networking
When successful to connect to network and establish with the cloud platform, the indicator light is green.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......