Products

Pipe Injection Insulation Rigid PU Foam System 0 Odp Blend Polyol

China Pipe Injection Insulation Rigid PU Foam System 0 Odp Blend Polyol, Find details about China Polyurethane Rigid Foam, Blend Polyol from Pipe Injection Insulation Rigid PU Foam System 0 Odp Blend Polyol

Model NO.
0 odp
Trademark
shunda
Specification
200kg
Origin
China
HS Code
39072090
Model NO.
0 odp
Trademark
shunda
Specification
200kg
Origin
China
HS Code
39072090
0 Odp Blend Polyol for Pipe Injection Insulation Rigid PU Foam System

Pipe Injection Insulation Rigid PU Foam System 0 Odp Blend Polyol

SDB10F-Z02 is a kind of blend polyol of whole water system used in pipe insulation. This kind of product use zero ozone depleting blowing agent (0 ODP), SDB10F-Z02 use CO2 as the blowing agent, which produced through the reaction of water and isocyanate. Every performance of SDB10F finished foam products can meet the requirements of GB/T29047 standard.
The foam produced has the characteristics as following:
  1. Water blowing agent, environmental protection, zero ozone depleting blowing agent(0 ODP).
  2. Every performance of the foam product meets the requirements of GB/T29047 standard.
  3. Every performance of the foam product is very stable.
TYPICAL PHYSICAL PROPERTIES
Physical Properities Test MethodMetricValue
Core DensityGB/T 6343-2009kg/m360
Radial Compressive StrengthGB/T 8813-2008MPa0.3
Initial Thermal Conductivity(50°C)GB/T 10294-2008W/(m·K)≤0.033
Close Cell ContentGB/T 10799-2008%≥88
Water AbsorptionGB/T 8810-2005%≤10
Air bubblesGB/T 29047mm1/3Insulation Thickness.
Average cell size.GB/T 29047mm≤0.5
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Pipe Injection Insulation Rigid PU Foam System 0 Odp Blend Polyol
Pipe Injection Insulation Rigid PU Foam System 0 Odp Blend Polyol
Shunda Company founded in year 1996, is a leading manufacturer of rigid PU foam blend polyol System material, our annual sales reached 50,000 MT in the past three years. We have four
Manufacturer plants in Yantai, Linyi, Dalian and Chang chun with totally more than 400 employees by now. For over 20 years development, Yantai Shunda Polyurethane Co., Ltd has grown up into a modern joint-stock enterprise, which has the research, development, production and operation for the series of rigid polyurethane foam production. We are also the largest global distributor of MDI series of Wanhua Chemical. Depending on our own strong R&D capability, professional purchasing team, quality control ability and full MDI series product supply, we could supply all series of PU raw material to the internal and abroad customers and undertake the
engineering of the insulation project.

Yantai Sanjiang Chemical Industry Materials Co., Ltd is established in 2010 by Shunda Group as its
International sale company, its mainly engaged in Blend polyol, Polyetherpolyol, flameretardants, PU catalysts, Polymeric MDI and other raw materials which are widely used for the insulation of wall and roof building, coldstorage, ship, sandwichpanel, refrigerators, freezers, pipelines, garage door and etc.

Pipe Injection Insulation Rigid PU Foam System 0 Odp Blend Polyol
Pipe Injection Insulation Rigid PU Foam System 0 Odp Blend Polyol
Pipe Injection Insulation Rigid PU Foam System 0 Odp Blend Polyol

Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
 
 
 

You Might Also Like