Aluminum Fall Protection Self Supporting Guardrail
China Aluminum Fall Protection Self Supporting Guardrail, Find details about China Freestanding Guardrail, Rooftop Freestanding Guardrail from Aluminum Fall Protection Self Supporting Guardrail
Basic Info.
Model NO.
V4-Inclined
Weave Technique
Non
Name
Freestanding Guardrail
Application
Roof Edge Protection
Type
Fully Modular System
Upright Type
Inclined
Field
Hardware
Quality
Standard
Min. Vertical Height
1100mm
Installation Situation
Flat and Low-Sloped Roofs
Dem
Acceptable
Delivery
2-3 Weeks
Trademark
Longdyes
Transport Package
Container
Specification
Customed
Origin
China
HS Code
7610900000
Model NO.
V4-Inclined
Weave Technique
Non
Name
Freestanding Guardrail
Application
Roof Edge Protection
Type
Fully Modular System
Upright Type
Inclined
Field
Hardware
Quality
Standard
Min. Vertical Height
1100mm
Installation Situation
Flat and Low-Sloped Roofs
Dem
Acceptable
Delivery
2-3 Weeks
Trademark
Longdyes
Transport Package
Container
Specification
Customed
Origin
China
HS Code
7610900000
Product Desciption
Name: Aluminum Fall Protection Freestanding Guardrail With Inclined Upright
Description:
Fall Protection self support Guardrail is also called freestanding guardrail. It's one of the simplest forms of rooftop fall protection. Unlike horizontal lifelines or single point anchors, which require worker tie-off, a rooftop guardrail system requires very little of its user. The people don't need to wear a harness, connect to an anchor point, or receive training in the safe use of the system. That said, you'll need to do some planning prior to installing freestanding rooftop safety railing systems to ensure worker safety and OSHA compliance. This post serves as a guide to determining baseplate and railing section requirements when installing the freestanding guardrail.
Materials:
The LONGDYES freestanding guardrail is manufactured from the aluminum 6063 or 6061.
The materials have excellent processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, the material is dense and defect-free and easy to polish, easy to paint film, excellent oxidation effect, etc.
Application:
Fall Protection for the flat and low-sloped roofs of the building.
Feature:
This variation is inclined at 30°, which adds to the aesthetics of the system whilst making the system less visible from ground level.
The result is better integration of guardrail into the building design.
Available in straight, curved or folding styles.
Specification:
Longdyes rooftop guardrails meet the standard of EN-ISO 14122-3 and EN 13374:
EN ISO14122-3: 2016 requirements:
7.1.3 The minimum height of the guard-rail shall be 1 100 mm. The height of the handrail shall be ≤1 100 mm. The handrail shall be parallel to the walking line.
7.1.4 The guard-rail shall include at least one intermediate knee rail or any other equivalent protection. The clear space between the handrail and the knee rail, as well as between the knee rail and the toe-plate, shall not exceed 500 mm.
7.1.5 When vertical uprights are used instead of a knee rail, the clear horizontal distance between those uprights shall be 180 mm maximum.
7.1.7 The distance between the axes of the stanchions is preferred to be limited to 1 500 mm.If this distance is exceeded, specific attention shall be paid to the stanchion anchoring strength and the fixing devices.
Counterweight:
The 25kg counterweight is designed to be attached to each of the main uprights, the shell is made of high quality PE material and filled with concrete which provides the necessary counterbalance weight to prevent the system from being moved.
Optional item- Toeboard
(EN ISO14122-3-2016) 7.1.6 A toe-plate with a minimum upstand of 100 mm shall be placed 12 mm maximum from the walking level and the edge of the platform, as well as stair landings. If there is a gap between the toe-plates of adjacent guard rail segments, this gap shall be not more than 20 mm.
Components:
The following components will be provided when the freestanding assembly is delivered:
Installation Steps:
Service:
Packed in pallets.
Delivery:
.
Description:
Fall Protection self support Guardrail is also called freestanding guardrail. It's one of the simplest forms of rooftop fall protection. Unlike horizontal lifelines or single point anchors, which require worker tie-off, a rooftop guardrail system requires very little of its user. The people don't need to wear a harness, connect to an anchor point, or receive training in the safe use of the system. That said, you'll need to do some planning prior to installing freestanding rooftop safety railing systems to ensure worker safety and OSHA compliance. This post serves as a guide to determining baseplate and railing section requirements when installing the freestanding guardrail.
Materials:
The LONGDYES freestanding guardrail is manufactured from the aluminum 6063 or 6061.
The materials have excellent processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, the material is dense and defect-free and easy to polish, easy to paint film, excellent oxidation effect, etc.
Application:
Fall Protection for the flat and low-sloped roofs of the building.
Feature:
This variation is inclined at 30°, which adds to the aesthetics of the system whilst making the system less visible from ground level.
The result is better integration of guardrail into the building design.
Available in straight, curved or folding styles.
Specification:
Longdyes rooftop guardrails meet the standard of EN-ISO 14122-3 and EN 13374:
EN ISO14122-3: 2016 requirements:
7.1.3 The minimum height of the guard-rail shall be 1 100 mm. The height of the handrail shall be ≤1 100 mm. The handrail shall be parallel to the walking line.
7.1.4 The guard-rail shall include at least one intermediate knee rail or any other equivalent protection. The clear space between the handrail and the knee rail, as well as between the knee rail and the toe-plate, shall not exceed 500 mm.
7.1.5 When vertical uprights are used instead of a knee rail, the clear horizontal distance between those uprights shall be 180 mm maximum.
7.1.7 The distance between the axes of the stanchions is preferred to be limited to 1 500 mm.If this distance is exceeded, specific attention shall be paid to the stanchion anchoring strength and the fixing devices.
| Type | Straight upright | Curved upright | Inclined upright | Folding upright |
| Min. vertical height | 1100mm | 1100mm | 1100mm | 1100mm |
Counterweight:
The 25kg counterweight is designed to be attached to each of the main uprights, the shell is made of high quality PE material and filled with concrete which provides the necessary counterbalance weight to prevent the system from being moved.
| Counterweight Size | |||
| Length | Width | Height | Weight |
| 370mm | 290mm | 145mm | 25kg |
Optional item- Toeboard
(EN ISO14122-3-2016) 7.1.6 A toe-plate with a minimum upstand of 100 mm shall be placed 12 mm maximum from the walking level and the edge of the platform, as well as stair landings. If there is a gap between the toe-plates of adjacent guard rail segments, this gap shall be not more than 20 mm.
Components:
The following components will be provided when the freestanding assembly is delivered:
Installation Steps:
- Position the counterweight onto the base module then fix it by tapping screws and shims.
- Insert upright module into the base then fix it by set screws.
- Get handrail and keenrail onto tube junctions then fix them by set screws.
Advantage:
- Simple and elegant appearance
- Fully modular system according to your needs
- Durable and robust, requires no maintenance
- White, natural aluminum or painted with the color of your choice
- Bases take up little room on the roof
- Possible installation in restricted areas
- Non-penetrating system
- Easy set up on all types of flat and low-sloped roof.
Service:
- OEM or DEM is available
- Timely communication with customers, no matter on-line or by email.
- Technical guidance for the company of professional and technical service personnel to provide customers with timely, efficient service.
- Reasonable, timely and effective quotation is probably.
- Sample testing is acceptable.
- The shipment is promptly and reliably.
- Technical and installation instructions are available after sales
- Factory visiting is welcomed.
Packed in pallets.
- Accessories box: Tube junction, variable corner, wall fixing, closure bends etc included.
- Counterweight pallet: 48/36-pcs per pallet, wrapped by stretch film
- Upright module pallet: Approx 552-pcs per pallet, wrapped by stretch film
- Base module pallet: Approx 216-pcs per pallet, wrapped by stretch film
- Handrail pack & Kneerail pack: 5-pcs per pack, wrapped by stretch film
Delivery:
- 20' GP container: Capable of loading approximately 572meters rooftop guardrail system, in standard loading situation.
- Usually, the shipment can be made within 2-3 weeks by sea.
.
You Might Also Like
Welding Acetylene Gas Usage Calcium Carbide
Spice Nootkatone 98% Wholesale and Direct Sales CAS 4674-50-......
Motorcycle Brake Pad for YAMAHA Fzr 400 Genesis Sinter Brake......
4D Slimming Machine for Body Sculpting with 528 Diodes Laser......
Bathroom Decoration White Marble Calacatta Porcelain Tile 24......
2021 Best Selling Salon Cheap Barber Chair for Sale
Liquid Optical Brightener Er Fluorescent Brightener 199 Oba ......
316L 0.4mm Thick Stainless Steel Sheet
100% Virgin Remy European Tape Hair Extension Balayage Color
High Quanlity Household Agricultureminiaturecorn Threshing M......
Clinical Analytical Instruments Latest 10 Th Resonance Quant......
Woman PU Leather Long Sleeve with Hood Bomber Jacket