Products

Optical Fiber RoHS Compliant 100GB /S Er10 40km Optical Transceiver Cfp

China Optical Fiber RoHS Compliant 100GB/S Er10 40km Optical Transceiver Cfp, Find details about China Switch, Qsfp28 from Optical Fiber RoHS Compliant 100GB/S Er10 40km Optical Transceiver Cfp

Model NO.
GFC-OLCCXXTXL-CD40
Delivery Time
3-7 Days
Warranty
3 Years
Distance
40km
Trademark
GFC
Transport Package
Antistatic Bag
Specification
100Gbps 40KM
Origin
Zhejiang China
HS Code
8517706000
Model NO.
GFC-OLCCXXTXL-CD40
Delivery Time
3-7 Days
Warranty
3 Years
Distance
40km
Trademark
GFC
Transport Package
Antistatic Bag
Specification
100Gbps 40KM
Origin
Zhejiang China
HS Code
8517706000

Product Features

  • Supports 103.1Gbps to 112Gbps bit rates
  • Duplex LC connector
  • Hot pluggable
  • 10x10Gb/s DWDM transmitter and pin receiver
  • 10x10G MLD electrical interface
  • Applicable for 40km SMF connection
  • Low power consumption, < 16W
  • Digital Diagnostic Monitor Interface
  • MDIO Communication Interface
  • Operating case temperature: Commerical:0 to 70 °C
 

Applications

  • 100GBASE-ER10 100G Ethernet
  • Other Optical link
 

Functional Description


GFC-OLCCXXTXL-CD40, 100G CFP ER10 optical transceiver integrates the transmit and receive path onto one module. On the transmit side, 10 lanes of serial data streams are recovered, retimed,and passed on to 10 laser drivers, which control ten electric-absorption modulated lasers (EMLs) with C band wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector.On the receive side, 10 lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and MDIO management interface.
 

Functional Diagram


Optical Fiber RoHS Compliant 100GB/S Er10 40km Optical Transceiver Cfp
Absolute Maximum Ratings
 
ParameterSymbolMin.Max.UnitNote
Supply VoltageVcc-0.54.0V 
Storage TemperatureTS-4085°C 
Relative HumidityRH085% 
Rx Damage Threshold,per LanePRdmg5.5 dBm 

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

Recommended Operating Conditions

 
ParameterSymbolMin.TypMax.UnitNote
Data RateDR 103.2112Gb/s 
Supply VoltageVcc3.143.33.46V 
Operating Case Temp.Tc0 70°C 
 

Electrical Characteristics (Top=0~70ºC, Vcc=3.2~3.4V)
(Tested under recommended operating conditions,unless otherwise noted)
 
ParameterSymbolMinTypMaxUnitNotes
Supply CurrentIcc  5A 
Supply VoltageVcc3.2 3.4V 
Transmitter
Signaling rate per laneDRPL 10.311.2Gb/s 
Input differential impedanceRin 100 Ω 
Differential data imput swing per laneVin,pp  760mV 
Data input rise time toleranceTr24  Ps1
Data input fall time toleranceTf24  ps1
Electrical input eye mask defintion{X1,X2}
{Y1,Y2}		{0.15,0.4}
{180,385}		UI
mV		 
Power Supply Noise ToleranceVripPer CFP MSA Specification 
Receiver
Signaling rate per laneDRPL 10.311.2Gb/s 
Differential data output swing per laneVout,pp  760mV 
Data output rise time toleranceTr2480 ps1
Data output fall time toleranceTf2480 ps1
Electrical input eye mask defintion{X1,X2}
{Y1,Y2}		{0.15,0.4}
{180,385}		UI
mV		 
Power Supply Noise ToleranceVripPer CFP MSA Specification 
Notes:
1.20%~80%
Optical Characteristics (Top=0~70ºC, Vcc=3.2~3.4V)
(Tested under recommended operating conditions,unless otherwise noted)
 
ParameterSymbolUnitMinTypMaxNotes
Transmitter
Signaling rate, each lane GBd10.3125 
Lane Wavelength Rangeλ1nm DWDM 1
Total launch powerPoutdBm  +11.7 
Average launch power, each lanePavgdBm-4 +2 
Difference in launch power between any two lanes (OMA) dB  5 
Extinction ratioERdB3.5   
Side-mode suppression ratioSMSRdB30   
Optical return loss tolerance dB  20 
Transmitter reflectance3 dB  -12 
Transmitter eye mask {X1, X2, X3, Y1, Y2, Y3}  IEEE 802.3 Clause 100Gbase 
Optical Receiver Characteristics
Receive Rate for Each Lane Gbps 10.3125  
Overload Input Optical PowerPmaxdBm5.5   
Average Receive Power for Each LanePindBm-16 0 
Receiver Sensitivity(OMA)per lanePsens1dBm  -162
Return LossRLdB-26   
 
Receiver Electrical 3dB upper cutoff frequency, per lane GHz  31 
Los De-AssertPddBm-30 -15 
Los AssertPadBm-30 -15 
Loss HysteresisPd-PadBm 2.5  

Notes:
  1. Lane Wavelength Range
 
LaneCenter Frequency (THz)
 Band1(C61-C52)Band2(C50-C41)Band3(C39-C30)Band4(C28-C19)
L0C61196.11528.77C50195.01537.40C39193.91546.12C28192.81554.94
L1C60196.01529.55C49194.91538.19C38193.81546.92C27192.71555.75
L2C59195.91530.33C48194.81538.98C37193.71547.72C26192.61556.55
L3C58195.81531.12C47194.71539.77C36193.61548.51C25192.51557.36
L4C57195.71531.90C46194.61540.56C35193.51549.32C24192.41558.17
L5C56195.61532.68C45194.51541.35C34193.41550.12C23192.31558.98
L6C55195.51533.47C44194.41542.14C33193.31550.92C22192.21559.79
L7C54195.41534.25C43194.31542.94C32193.21551.72C21192.11560.61
L8C53195.31535.04C42194.21543.73C31193.11552.52C20192.01561.42
L9C52195.21535.82C41194.11544.53C30193.01553.33C19191.91562.23
 
  1. measured at 10.3125 Gb/s with PRBS 231  - 1 NRZ test pattern for BER < 1x10-12

Package Dimensions

Optical Fiber RoHS Compliant 100GB/S Er10 40km Optical Transceiver Cfp


Optical Fiber RoHS Compliant 100GB/S Er10 40km Optical Transceiver Cfp
Optical Fiber RoHS Compliant 100GB/S Er10 40km Optical Transceiver Cfp

 

You Might Also Like