50mva 66kv Oil-Immersed Power Transformer with on-Load (Off-load) Tap Changer

Product introduction

* The transformer core is made of imported high-quality cold-rolled silicon steel sheet, which greatly reduces no-load loss and no-load current. The core is tightly bound to ensure the compactness and reduce noise.
*  The high and low voltage windings are made of oxygen-free copper. The low voltage winding of 500KVA and below is of double-layer cylinder structure, of 630kVA and above adopt double helix or four helix structure. High-voltage winding adopts multi-layer cylinder structure.
*  Dyn11 is used in the transformer connection group to reduce the influence of harmonics on the power grid and improve the quality of power supply.
* The transformer is a fully sealed structure, with three coats of primer and one coat of finish paint applied on the inner and outer surfaces. The product is salt fog proof, moisture proof and fungus-proofing, beautiful, durable and reliable
* The measured noise value is lower than the standard and maintenance free under normal operation.

Product features

* This model is produced in accordance with Chinese national GB standards and the international IEC standards.
* It uses oil as the main insulation means of the transformer, and relies on oil as the cooling medium, such as oil-immersed natural cooling, oil-immersed air cooling, oil-immersed water cooling and forced oil circulation, etc.
* The main components: iron core, winding, fuel tank, oil pillow, breathing apparatus, explosion-proof tube (pressure release valve), radiator, insulating casing, tap switch, gas relay, thermometer, oil purifier, etc.
* Widely used in high-rise buildings, commercial centers, subways, airports, stations, industrial and mining enterprises, drilling platforms and oil production platforms; especially suitable for use in flammable, explosive and other harsh environments.

Transformer Structure

Technical parameters of S13 10kV oil-immersed transforme

Rated Capacity (kVA)	Type	Vector Group	No-Load loss (kW)	Load loss (kW)	Short-circuit impedance (%)
30	S13-30/10	Y,yn0	0.08	0.63/0.6	4
50	S13-50/10		0.1	0.91/0.87
80	S13-80/10		0.13	1.31/1.25
100	S13-100/10		0.15	1.58/1.5
125	S13-125/10		0.17	1.89/1.8
160	S13-160/10		0.2	2.31/2.2
200	S13-200/10		0.24	2.73/2.6
250	S13-250/10		0.29	3.2/3.05
315	S13-315/10		0.34	3.83/3.65
400	S13-400/10		0.41	4.52/4.3
500	S13-500/10		0.48	5.41/5.1
630	S13-630/10		0.57	6.2	4.5
800	S13-800/10		0.7	7.5
1000	S13-1000/10		0.83	10.3
1250	S13-1250/10		0.97	12
1600	S13-1600/10		1.17	14.5

Note: The above are some product technical parameters, if you have any questions, please contact us

Conditions of Use

*The maximum ambient air temperature shall not exceed 40°C, and the minimum shall not below -25°C;
*The altitude shall not exceed 1000m. If special customized transformers and low-voltage components are used, the altitude can reach 4,000m;
*The vertical inclination is no more than 5°, and no violent vibration and impact;
*The air humidity is not more than 90% (25°C);
*No gas and conductive dust that will seriously affect the insulation of transformer,no explosion hazard and corrosion of electrical components;
*Outdoor wind speed shall not exceed 35m/s;
*If service conditions beyond the above, specially customized product is available.

Company Introduction 


At present, the company's products mainly cover the oil immersed transformer below 35kV, dry type transformer;Medium voltage switchgear and low voltage switchgear below 40.5KV;Intelligent box type substation;Distribution box, cable and other electrical equipment;Existing technology research and development team of more than 50 people, 15 doctors, all from the domestic well-known electrical major graduates;The company's products have passed ISO, CE, CB, SGS, STL, CQC, CCC and other international authority certification, has been exported to more than 50 countries and regions, the main market in Southeast Asia, Africa, the Middle East, the Americas and other regions and countries.

HFY Certification

Our Services
We have established strict working procedures and standards in the development, production, sales and after-sales of electrical products, so as to provide customers with first-class products and the best service. 

1. Our electrical engineer has more than 10 years of working experience
2.Our workshop workers are all skilled industrial workers who have received three months 'pre-job training
3. Our sales team has been extensively trained by management consultants to provide professional solutions for customers
4. Our technical team can provide customers with 24-hour technical support world wide
5. Our customer service team ensures that orders are delivered on time. 
6.We strictly implement the ISO9001 quality standard


FAQ

Q1: Is OEM/ODM available?
A1: Yes, it is! Our products can be Customized. We have design and engineer teams,we can customize products according to customers' drawing or requirements.
Q2: What's your MOQ?
A2: One Set.
Q3: How is the delivery time?
A3: It depends your order quantity and it normally takes about 15-20 days.
Q4: How do you control the quality?
A4: We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.Every product will be fully assembled and carefully tested before packing and shipping.
Q5: How long is the warranty?
A5: Within one year from the sale date, if there are any accessory problems, you just provide the photos of damaged accessory, then we will provide free accessory. According to the number of products, we will provide easily damaged accessories for free. We also can provide technical support if you need.