Product Overviews:
UN-HTD-WA308 is an industrial wireless analog 8 analog output controller. It uses high performance DSP Chip from US TI Inc., UN-HTD-WA308 provides users with multi-scale, high voltage isolation, low drift and offering smart measurement and control solutions suitable for widely operating environment temperature range.

HTD-WA308 has 8 AO, high accuracy with up to 115.2kbps communication speed rate. It is mainly used in data collection within industrial field and other distributed fields. With easy to operate calibration software, HTD-WA308 is easy for user to do the zero and full-scale calibration. 

UN-HTD-WA308 data collection module uses industrial wireless RS485 communication network. It transmits the analog data to the master or remote PC-controlled master station after the transfer through AD. It has dual watchdog security design which includes software and hardware watchdogs. Module will instantly restart when the program dashed, HTD-WA308 can solve the inconvenient wiring and long distance transmission problem as it can communicate with other I/O controller in different configuration.

  UN-HTD-WA industrial wireless I/O controller has four configurations like 2 analog,4 analog, 6 analog and 8 analog. The I/0 configuration setting can also be flexible. Users can close the unused channel through software so that to increase loop speed.

Even if the RS485 communication network gets fault and the master computer and controller cannot interlock and communicated, it will still start up software watchdog. The watchdog is well-designed, easy to use and can consolidate system security largely.

UN-HTD-WA industrial wireless I/O controller has four configurations like 2 analog,4 analog, 6 analog and 8 analog. The I/0 configuration setting can also be flexible. Users can close the unused channel through software so that to increase loop speed.

HTD-WA industrial wireless analog I/O controller use standard Modbus RTU protocol. Controller will transmit the collected data through wireless way to control room or upper control machine like PLC, DCS and other industrial control system machine. HTD series has been widely used in Siemens, Schneider, Mitsubishi, Omron, Rockwell and Delta etc.

Technical Specification:
Input port: 8 high precision output
Transmitting Power: 1W(for 3km wireless distance), can be customized to 10 or 20km.
Interface Port: external 16-bit terminals, easy for disconnection
Input Type:mA,V(with 100Ω high precision and no need for external connection)
Input Range:4~20mA;0-5V,0-10V
Input Impedance: 100 Ω
Sampling Rate: 15 Hz
Resolution: 24bits
Bandwidth: 15.75Hz
Accuracy: ±0.02% or better
Zero Drift: 20uV/°C
Full-scale Drift: 25ppm/°C
CMR@ 50/60Hz: 92dB min
Overvoltage Protection: ±35V
Microprocessor: 22M CPU with in-built watchdogs with high-speed, reliable and antilock characteristics
RS485 Speed Rate: 1200 to 115200bps automatically adapted to RS475 bus rate, no need for setting.
Parameter Settings: Baud rate and checksum need to connect INIT port to the ground. Others parameters will have real-time change.
Status LED: On during Power-On Self Test (POST), and Flashes during communication  
Operating Temperature: -25°C to +75°C
Storage Temperature: -40°C to +85°C
Working Humidity: 5% to 95%, no condensing
External Power Supply: +7.5~12V
Size: 190x150x45(mm)
Power Consumption: 1.3W
Installation: Screws fixed