Ethernet Industry 4.0 Controller for Iiot PT100 Temperature PLC Pr-23DC-Ptdai-Rt-N
China Ethernet Industry 4.0 Controller for Iiot PT100 Temperature PLC Pr-23DC-Ptdai-Rt-N, Find details about China PLC, Programmable Logic Controller from Ethernet Industry 4.0 Controller for Iiot PT100 Temperature PLC Pr-23DC-Ptdai-Rt-N
Basic Info.
Model NO.
PR-23DC-PTDAI-RT-N
Input
3PT100+6di/Ai(0-10VDC)+4di/Hsi
Output
2 PNP 0.3A+8 Relay Outputs
Supply
DC 24V
Weight
Approx. 400g
Expansion
Yes(16PCS in Max)
Ethernet Port
Yes
4G/GSM/GPRS
No
Email
No
Datalogger SD Socket
Yes
Trademark
RIEVTECH
Specification
133mm*90mm*60mm
Origin
Nanjing, China
HS Code
8537101190
Model NO.
PR-23DC-PTDAI-RT-N
Input
3PT100+6di/Ai(0-10VDC)+4di/Hsi
Output
2 PNP 0.3A+8 Relay Outputs
Supply
DC 24V
Weight
Approx. 400g
Expansion
Yes(16PCS in Max)
Ethernet Port
Yes
4G/GSM/GPRS
No
Email
No
Datalogger SD Socket
Yes
Trademark
RIEVTECH
Specification
133mm*90mm*60mm
Origin
Nanjing, China
HS Code
8537101190
Product Desciption
About Programming Cable.
Pleased to inform you that our micro plc is developed 100% by ourself ,and they are incompatible with any other brands plc's programming cable. so we strongly suggest you also purchase the programming cable when you purchase the CPU units,we have two types programming cables,one is USB CABLE (USB communication module PC and ELC units); the other is RS232 CABLE (RS232 programming cable between PC and PR units,or connection cable between CPU and HMI with standard RS232 port).Without programming cable, you can not set up connection/communication between PC and PLC, further, you naturally can not make programme via PC, and surely unable to download your programme to our PLC.
About Programmable Software.
Programming software For PR Series is xLogicSoft.
Programming software For EXM Series is eSmsConfig.Download link:https://rievtechplc.en.made-in-china.com
GENERAL SPECIFICATIONS
Timers: 1024
Counters: 1024
Function Blocks: 1024
Operation temp.: -20°C - 55°C
Storage: -40°C - 70°C
Protection: IP20 (Non-waterproof)
RTC accuracy: MAX ±2S/day
RTC Backup at 25 °C: 20 days
Program and settings Backup: 10 years
Data Power-off retentivity: 10 years
Modify parameters via keypad LCD: YES
Dimensions: 133*90*60(Unit:mm)
Certificate: CE
Installation: 35-DIN rail or screw for installation
Expansion capacity: 16 modules (PR-E-16)
Password protection: 4-digit number password protection or disable program upload function
Communication interface: 1 RS232 Port (COM0) & 1 RS485 port (COM1 external) available via optional accessory, 1 built-in RS485 (C0M2), 1Ethernet port.
Communication protocol: Modbus RTU/ASCII, Modbus TCP
Technical Index
| Power supply: | |
| Nominal voltage | DC 24V |
| Operating limits | DC 20.4-28.8V |
| Immunity from micro power cuts | Typ.5 ms |
| Max. Startup current | Max. 0.3A |
| Max. absorbed power | 10W |
| Protection against polarity inversions | Yes |
| Input parameters: | |
| Input No | 13 ( AI1-AI3, I7 - IG) |
| Digital input | 10 ( I7-IG) |
| Analogue input | 3 PT100(-50…200ºC) + 2(I7-I8)(0…10VDC) +4(ID-IG)(0...20mA OR 0…10V DC) |
| PT100 inputs (AI1-AI3) | |
| Analog input | 3 channels PT100 |
| Resolution | 0.3ºC |
| Measuring range | -50ºC to +200ºC |
| Cable length | 10m max. shielded and twisted |
| Digital input and analog inputs (0...10V)10bits ( I7-I8 ) | |
| Inputs used as digital inputs( I7-I8 ) | |
| Input voltage | DC0-28.8V |
| Input signal0 | < 5V DC;<0.08mA |
| Input signal1 | > 8 V DC;>0.12mA |
| Input current | 0.16mA @ 10.8V dc 0.18mA @ 12.0 V dc 0.34mA @ 24 V dc 0.41mA @ 28.8 V dc |
| Response time | 0 to 1 :Typ. 10.5 ms ;1 to 0 :Typ. 1.5 ms |
| Maximum counting frequency | Typ.:4 HZ |
| Sensor type | Contact or 3-wire PNP |
| Input type | Resistive |
| Isolation between power supply and inputs | None |
| Isolation between inputs | None |
| Inputs used as analog inputs(0..10V)( I7-I8 ) | |
| Measurement range | DC 0---10V |
| Input impedance | Min, 24KΩ; Max. 72KΩ |
| Input voltage | 28.8 V DC max |
| Resolution | 10bit ,0.01V |
| Accuracy at 25 °C | ± (Max.0.02)V |
| Accuracy at 55 °C | ± (Max.0.04)V |
| Isolation between analog channel and power supply | None |
| Cable length | 10 m max. shielded and twisted |
| Digital and high speed inputs(I9--IC) | |
| Digital inputs( I9-IC ) | |
| Input voltage | DC0-28.8V |
| Input signal0 | < 5V DC; <1mA |
| Input signal1 | > 8 V DC;>1.6mA |
| Input current | 2.1mA @ 10.8V dc 2.3mA @ 12.0 V dc 4.6 mA @ 24 V dc 5.5 mA @ 28.8 V dc |
| Response time | 0 to 1 :<1 ms ;1 to 0 :<1 ms |
| High speed inputs( I9-IC ) | |
| Maximum counting frequency | 60kHZ(I9--IC) |
| Digital and analog(0--10V)&analog(0...20mA)(ID-IG) | |
| Inputs used as digital inputs( ID-IG ) | |
| Input voltage | DC0-28.8V |
| Input signal0 | < 5V DC;<0.08mA |
| Input signal1 | > 8 V DC;>0.12mA |
| Input current | 0.16mA @ 10.8V dc 0.18mA @ 12.0 V dc 0.34mA @ 24 V dc 0.41mA @ 28.8 V dc |
| Response time | 0 to 1 :Typ. 10.5 ms ;1 to 0 :Typ. 1.5 ms |
| Maximum counting frequency | Typ.:4 HZ |
| Sensor type | Contact or 3-wire PNP |
| Input type | Resistive |
| Isolation between power supply and inputs | None |
| Isolation between inputs | None |
| Inputs used as analog inputs(0..10V)( ID-IG ) | |
| Measurement range | DC 0---10V |
| Input impedance | Min, 24KΩ; Max. 72KΩ |
| Input voltage | 28.8 V DC max |
| Resolution | 10bit ,0.01V |
| Accuracy at 25 °C | ± (Max.0.02)V |
| Accuracy at 55 °C | ± (Max.0.04)V |
| Isolation between analog channel and power supply | None |
| Cable length | 10 m max. shielded and twisted |
| Input signal0 | < 5V DC;<0.08mA |
| Input signal1 | > 8 V DC;>0.12mA |
| Input current | 0.16mA @ 10.8V dc 0.18mA @ 12.0 V dc 0.34mA @ 24 V dc 0.41mA @ 28.8 V dc |
| Response time | 0 to 1 :Typ. 10.5 ms ;1 to 0 :Typ. 1.5 ms |
| Sensor type | Contact or 3-wire PNP |
| Input type | Resistive |
| Isolation between power supply and inputs | None |
| Isolation between inputs | None |
| Inputs used as analog inputs(0..20mA)( ID-IG ) | |
| Analogue signal | 0/4….20mA current |
| Input impedance | 260Ω |
| Resolution | 0.02mA |
| Accuracy at 25 °C | 0.05mA |
| Cycle time for analog value generation | Typ. 50 ms |
| Protection against polarity inversions | yes |
| Overvoltage protection | Yes, if the input voltage is >6.5V, this one is automatically switched on 0--10V configuration |
| Isolation between power supply and inputs | No |
| Cable length | <=30M with shielded twisted cable(sensor not isolated) |
| Output | |
| Digital/Transistor output(PNP) - Q1,Q2 | |
| Breaking voltage | DC 5--30V |
| Nominal voltage | ≤ Supply voltage |
| Nominal current | Max. 0.3 A per channel |
| Max. breaking current | 0.65 A |
| Voltage drop | < 2 V for I = 0.3 A (at state 1) |
| Response time | Make ≤ 1 ms Release ≤ 1 ms |
| Frequency (Hz) | resistive load : 10 Hz inductive load : 0.5 Hz |
| Built-in protections | Against overloads and short-circuits: No Against overvoltages (*): No |
| Galvanic isolation | None |
| PWM frequency | 10K HZ |
| PWM cyclic ratio | 0 to 100 % |
| PWM accuracy at 120Hz | < 0.5 % (20 % - 80 %) load at 10 mA |
| Max. Breaking current PWM | 50 mA |
| Max. cable length PWM | 20m |
| 5A Relay 4 outputs from Q3 to Q6 | |
| Max. breaking voltage | CE:AC 250 V/DC 30 V 5A UL:AC 250 V/DC 30 V 3A |
| Electrical durability Expectancy | 105 Operations at Rated Resistive Load |
| Mechanical life | 107 Operations at No Load condition |
| Response time | Operate Time: 15 mSec. Max. Release Time: 10 mSec. Max. |
| Built-in protections | Against short-circuits: None Against overvoltages and overloads: None |
| 10A Relay 4 outputs from Q7 to QA | |
| Max. breaking voltage | CE:AC 250 V/DC 30 V 10A UL:AC 250 V/DC 28 V 5A |
| Max. Allowable Power Force | 1250VA |
| Electrical durability Expectancy | 105 Operations at Rated Resistive Load |
| Mechanical life | 107 Operations at No Load condition |
| Response time | Operate Time: 15 mSec. Max. Release Time: 10 mSec. Max. |
| Built-in protections | Against short-circuits: None Against overvoltages and overloads: None |
| Communication ports parameters: | |
| COM0_TTL port | Can be used as program port with PR-RS232&PR-USB; Also can be convert to RS232 port with PR-RS232 Can be convert to RS485 port with PRO-RS485 Note:Need move away the expand cover to use it Can be used as modbus master or slave |
| Built-in RS485 COM2 | 1 built-in RS485 port (Terminal A+,B-) Can be used as modbus master or slave |
| Ext RS485 COM1 | Need use with PR-E-RS485 module Can be used as modbus master or slave |
| Ethernet port: | Built-In(10M/100M), 1.Can be used as program or communication 2.Can be used as modbus master or slave |
| Monitoring webserver page | Yes |
| Xlogic<--->Xlogic(by Ethernet) | 1 xlogic works as tcp server can connect with 8 tcp client xlogics or other tcp devices. |
| Xlogic<--->Ethernet/Internet: | 1 xlogic works as TCP clients can connect with 8 different tcp servers separately in maximum |
| Other parameter | |
| Weight | Approx.400g |
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......