0-50mv to 0-10V Isolation Amplifier Converter DIN Rail-Mounted

China 0-50mv to 0-10V Isolation Amplifier Converter DIN Rail-Mounted, Find details about China 0-50mv to 0-10V, 0-50mv to 0-10V Conditioner from 0-50mv to 0-10V Isolation Amplifier Converter DIN Rail-Mounted

Basic Info.

Model NO.

DIN3 ISOEM U8-P1-O5

Trademark

SUNYUAN SZ

Specification

ABS

Origin

Shenzhen

Model NO.

DIN3 ISOEM U8-P1-O5

Trademark

SUNYUAN SZ

Specification

ABS

Origin

Shenzhen

Product Desciption

DIN3 Rail 0-5V/0-10V/4-20mA/0-20mA Current Voltage (I/V, I/I,V/I, V/V) Signal Isolation Amplifier Magneto-electric Isolation Transmitter/Converter

General characteristics:
>> Efficiency Grade:0.1/0.2
>> High precision, error and nonlinearity < 0.1%
>> 0-5V/0-10V/1-5V/0-+/-5V/0-+/-10V/0-10mA/0-20mA/4-20mA international standard current signal input and output
>> Three port isolation:Input/output/power supply isolation voltage can reach 3000VDC.
>> Temperature Range:-25~70 deg.C
>> Standard DIN Rail Mounting,super slim (12.5mm),low cost.

Applications:
>> DC current/voltage signal isolated/transfer/amplifier
>> Equipment and sensor signal acquisition
>> 4-20mA signal isolation and transfer
>> Ground-loop elimination
>> Electric power,medical instrument isolated safe bar.
>> No distortion in long distance signal

Max. Rated Value
(If the product operates in the max. rated vale in the long-term, may affect the durability, if exceed the max. values, may cause unrepairable damage.)

Continuous Isolation Voltage 3KVDC/rms

Power supply Volt. Input Range: ±25%Vdd

Operating Temperature - 45ºC ~ + 85ºC

Wielding Temperature (<10S) +300ºC

Voltage Signal Output Min. Load 2KΩ

Model Selection:
DIN3  ISO EM  U(A) -P- O
Small size  Magneto-electric
Din rail    isolation

Input Voltage/Current
U1:0-5V         A1:0-1mA
   U2:0-10V        A2: 0-10mA
   U3:0-75mV       A3: 0-20mA
  U4:0-2.5V        A4: 4-20mA
   U5:0-±5V        A5:0-±1mA
   U6:0-±10V       A6: 0-±10mA
   U7:0-±100mV     A7: 0-±20mA
   U8:Customized   A8: Customized
Auxiliary Power
   P1:DC24V   P2:DC12V
   P3:DC5V    P4:DC15V  P8:Customized
Output
   O1:  4-20mA      O2:  0-20mA      O4:  0-5V           O5:  0-10V
   O6:  1-5V         O7:  0-±5V        O8:  Customized      O9: -20-+20mA     O10:0-±10V

Model selection examples:
E.g. 1:  DIN35 Terminal wiring type, signal input: 0-5V, signal output: 0-5V, auxiliary power: 24V.
        Product Model No:  DIN3  ISO EM  U1-P1-O4

E.g. 1:   DIN35 Terminal wiring type, signal input: 0-10V, signal output: 0-20mA, auxiliary power: 24V.
        Product Model No:   DIN3  ISO EM  U2-P1-O2

General Parameters

Parameters			Test Conditions	Min.	Typical Value	Max.	Unit
Isolation voltage			AC,50Hz,1min		3000		V(rms)
Gain					1		V/V
Gain temp. drift					35		ppm/ºC
Non-linearity					0.1	0.2	%FSR
Signal Input		Voltage		0		15	V
Signal Input		Current		0		30	mA
Input offset voltage					2	5	mV
Input impedence		Voltage			1		M
Input impedence		Current			50	250	Ω
Signal output		Voltage		-10		10	V
Signal output		Current		-20		20	mA
Load capacity		Voltage	Vout=10V		2		kΩ
Load capacity		Current		0	350 50	650	Ω
Frequency response			-3DB		1		KHz
Signal output ripple			No filtering		10	20	mVRMS
Signal voltage temp. drift						0.2	mV/ºC
Auxiliary power	Voltage		User-defined	3.3	12	24	VDC
Auxiliary power	Consumption				0.5	1	W
Operating ambient temp.				-45		85	ºC
Storage Temp.				-55		105	ºC