Network Wireless Amplifying Repeater 4W 4000MW 5000~5875MHz 36dBm Low Noise WiFi Signal Booster for Uav, IP Cameras
China Network Wireless Amplifying Repeater 4W 4000MW 5000~5875MHz 36dBm Low Noise WiFi Signal Booster for Uav, IP Cameras, Find details about China Cell Booster Network Repeaters, Cellular Range Extender from Network Wireless Amplifying Repeater 4W 4000MW 5000~5875MHz 36dBm Low Noise WiFi Signal Booster for Uav, IP Cameras
Basic Info.
Model NO.
SH58Gi4000P
Item
2.4GHz 3W Indoor WiFi Signal Booster
Sku
0305sh100023
Operating Range
2400~2500MHz
Supported Standards
IEEE 802.11A/N/AC
Input Power
0~20 dBm
Transmit Gain
14-17dB
Output Power
2500MW (34dBm)
Receiver Gain
Less Than 12 dB
Supported Voltages
5V~16V/2A DC,100V~240V
Booster Weight
85g
Trademark
Sunhans
Transport Package
Carbon
Specification
8.4 x 4.7 x 1.7cm
Origin
China
Model NO.
SH58Gi4000P
Item
2.4GHz 3W Indoor WiFi Signal Booster
Sku
0305sh100023
Operating Range
2400~2500MHz
Supported Standards
IEEE 802.11A/N/AC
Input Power
0~20 dBm
Transmit Gain
14-17dB
Output Power
2500MW (34dBm)
Receiver Gain
Less Than 12 dB
Supported Voltages
5V~16V/2A DC,100V~240V
Booster Weight
85g
Trademark
Sunhans
Transport Package
Carbon
Specification
8.4 x 4.7 x 1.7cm
Origin
China
Product Desciption
Sunhans Network Wireless Amplifying Repeater 4W 4000mW 5000~5875MHz 36dBm Low Noise WiFi Signal Booster for UAV, IP cameras IEEE 802.11a/n/ac Supported
Features:
5.8GHz, Max. 4000mW output power;
Aluminum-alloy case by CNC, anti-interference;
Cost effective solution for weak signal zones, reduce drop/off calls;
Full kit, easy to install; light weight, small size, protable;
Designed for house, office, UAV, IP cameras, RC equipment....
Cell phone Amplifier Description: 4000mW 5.8Ghz 36dBm WiFi Signal Booster
Package contents:
All specifications of PA can be customized based on customer requirement.
Product Description:
The 2.4GHz WLAN signal booster is designed for IEEE 802.11b/g/n/a/ac Wireless LAN Applications.The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification. The signal booster can work with most WLAN/Wi-Fi device and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate.
Application:
2.4GHz 3w 35dBm is Popular for UAV,Routers,IP cameras, R/C helicopters, planes and cars, Bluetooth, Walkie talkies,Robotics for beach and flood rescue;
For house, office,Hotels,supermarkets, Hospitals,parking spaces, office....
Solution: Hot Spot solutions,Access points,Smart home systems
1. What is the WiFi signal booster?
The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.
2. Can I install the Sunhans booster myself?
Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.
About US
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.
♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
Features:
5.8GHz, Max. 4000mW output power;
Aluminum-alloy case by CNC, anti-interference;
Cost effective solution for weak signal zones, reduce drop/off calls;
Full kit, easy to install; light weight, small size, protable;
Designed for house, office, UAV, IP cameras, RC equipment....
Cell phone Amplifier Description: 4000mW 5.8Ghz 36dBm WiFi Signal Booster
| SKU | 0305SH100311 |
| Model | SH58Gi4000P |
| Operating Range | 5000~5875 GHz |
| Channel width | 20Mhz & 40Mhz & 80MHz |
| Supported standards | IEEE 802.11a/n/ac |
| Operating Mode | Bi-directional, half-duplex, time division duplex |
| Connector type | To radio SMA female (hole inside). To antenna RP-SMA female (pin inside) |
| Input power | 0~20 dBm |
| Transmit gain | 15-18dB |
| Output Power | 4W (36dBm) |
| Receiver Gain | ≤ 12 dB |
| Noise Figure | ≤3.5 dB typical |
| Frequency Response | ±1dB over operating range |
| Connector type | N-K female |
| Power supply | 12V/2A DC, 100~240V |
| Operating Temperature | -20°C to + 70°C |
| Operating Humidity | Up to 75% relative humidity |
| LED light | Power status LED and activity status LED |
| Material | Cast Aluminum |
| Booster Size | 9.7 x 6.4 x 1.7cm |
| Booster Weight | 133g |
Package contents:
1 x SH58Gi4000 WiFi booster
1 x RG316 cable with SMA connectors (20cm)
1 x 6dBi omni antenna
1 x power supply
1 x user manual
1 x RG316 cable with SMA connectors (20cm)
1 x 6dBi omni antenna
1 x power supply
1 x user manual
All specifications of PA can be customized based on customer requirement.
Product Description:
The 2.4GHz WLAN signal booster is designed for IEEE 802.11b/g/n/a/ac Wireless LAN Applications.The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification. The signal booster can work with most WLAN/Wi-Fi device and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate.
Application:
2.4GHz 3w 35dBm is Popular for UAV,Routers,IP cameras, R/C helicopters, planes and cars, Bluetooth, Walkie talkies,Robotics for beach and flood rescue;
For house, office,Hotels,supermarkets, Hospitals,parking spaces, office....
Solution: Hot Spot solutions,Access points,Smart home systems
| Features: |
| 1. Easy Installation |
| 2. Plug and play, no software setup. |
| 3. 3.5dB ultra-low noise |
| 4. Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times. |
| 5. Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied |
| 6. Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc. |
1. What is the WiFi signal booster?
The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.
2. Can I install the Sunhans booster myself?
Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.
About US
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.
♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......