1. Description
The Mini-Inductor uses electromagnetic fields for the heating of ferrous and some non-ferrous metals without the danger of an open flame. This flameless heat system is also faster, smaller, and more precise than oxy-acetylene system.
Can turn a 3/4"nut cherry red in 10 seconds.
2. Applications
Frozen/Rusted/Stuck/Corroded/Thread-lock compounded nuts & bolts, fasteners, steering & suspension nuts, bearings, gears, pulleys, inline nuts, fuel tank strap nuts, 02 sensors, brake line nut, lug nuts, exhaust manifold bolts, harmonic balancer bolt, windshield wiper nuts, A/C lines, seat belt bolts, U-bolts/drive shaft bolts, bearing hub &/or race removal, tie rod sleeves, soft hail dent removal(PDR), metal fabrication, soldering, heat treating, and free up frozen hinges.
Also removes undercoating and bed liner from nuts and bolts.
3. Warranty
One year freely after the customer receive the Mini-Inductor.

KIA-1.1KW-PLUS PORTABLE INDUCTION HEATER
Product introduction:
Since our company was established in 1995, we have accumulated more than ten years of experience in resistance welding and high-frequency machine production, combined with the miniaturization and miniaturization concepts pursued by today's society, and we have developed KIA in cooperation with Europe. On the basis of KIA-1000W, a new upgraded version of KIA-1.1KW Plus series mini induction heating machine has been developed.
The new upgraded version of KIA-1.1KW Plus mini induction heating machine is upgraded on the basis of the original KIA-1000W model, with a higher-end texture. The original twisted screw method of clamping coil is now upgraded to mechanical knob automatic clamping. It is more convenient to use than the old model, and the power is increased to 1.1KW, and the heating speed is greatly improved.
The machine perfectly applies magnetic induction technology, which can heat treat small parts of automobiles, machinery, various metal parts and polyethylene. It is mainly used to heat various automobile corroded bolts, nuts, gears, pulleys, pulleys, bearings, and inductors. and many more.
No open flames, no need to avoid plastics and other flammable substances; no water cooling, safe operation, easy to use, and convenient to carry.

Product function demonstration:
This machine is a 1.1KW handheld inverter power supply, which is mainly used to heat rusty and corroded nuts to achieve the effect of loosening it. In addition, it can also be used for heat treatment of gears, pulleys, pulleys, bearings and other precision parts and plastic parts.
For example: in the case of the following picture, it is definitely unwise to use an open flame to heat the nut. This will not only fail to achieve the effect, but may damage other parts, and it is also very dangerous; while using this machine for heating, the heating is uniform and fast To achieve the purpose of twisting and removing the nut, because there is no open flame, it is very safe.