China 2inch Hose Crimping Machine Crimping Hydraulic Hose 4sp, Find details about China Hose Crimping Machine, Crimping Machine from 2inch Hose Crimping Machine Crimping Hydraulic Hose 4sp
Crimp range | 4mm-87mm |
For hydraulic hose | 2inch 4SP |
Max opening without dies | 125mm |
Opening | 28mm |
Force | 530T |
Cycle time | 9s |
Voltage & Power | 380V-50HZ-3PH |
Optional voltage | 220V,440V |
Pump | Piston pump 14.5min/L |
Dies sets | 10 |
System pressure | 31.5Mpa |
Machine size | 690mm*465mm*728mm |
Weight without oil | 185KG |
Shelf+quick change | has |
Electric limit switch | has |
Electric control with touch screen | Optional |
Die bore | 15mm | 18mm | 20mm | 23mm | 26mm | 29mm | 37mm | 46mm | 51mm | 63mm |
length | 65mm | 65mm | 65mm | 65mm | 65mm | 65mm | 65mm | 78mm | 78mm | 78mm |
Hose I D | 6mm | 8mm | 10mm | 13mm | 16mm | 19mm | 25mm | 32mm | 38mm | 51mm |
Computer type control introduction:
Key name | function description |
Emergency stop button | The machine stop, an emergency stop |
Start button | Motor start |
Tighten button | Machine tighten operation |
Fine-tuning key | Adjust tighten volume and loosen volume |
Mode select key | Mode selection, save (long press more than two seconds) |
Tighten key | The same with tighten button |
Loosen key | Machine loosen operation |
On the left mode of choose button you can see six modes button:
From the left is hand mode: your hand must press the button all the time, when you loosen the button the machine will stop.
Semi-automatic mode :when you press the tighten button, the machine will finish one cycle and then stop.
Back fix mode: you can set and when the hose touch the back fix the machine will work one cycle.(we can add it if you choose)
Pedal mode: work and control with the pedal switch
Time delay mode: when you press the tighten button the machine will tighten the hose and then two seconds later will loosen by itself.
Quick change tool mode: it just for you change the dies by quick change tool.(we can add it if you choose)
Hose crimping machine KM-91H Special:
NEW foam inserts introduced to protect your machine from debris dropping into
the bottom of the head. With there you will minimize the risk of debris getting
into the cylinder which could cause damage to seals and other moving parts of
the head. This will significantly extend the life of hydraulic hose crimping machine.
Hose crimping machine KM-91H applition: