Products

Fluidized Bed Vertical Tube Furnace with 1' O. D Quartz Tube and Flange for Powder CVD

China Fluidized Bed Vertical Tube Furnace with 1′′ O. D Quartz Tube and Flange for Powder CVD, Find details about China Fluidized Bed CVD Tube Furnace, Heat Treatment Fluidized Bed from Fluidized Bed Vertical Tube Furnace with 1′′ O. D Quartz Tube and Flange for Powder CVD

Model NO.
CY-OTF-1200X-S-FB
Casing
Double Layer Steel
Mas.Temperature
1100c
Max.Heating Rate
20c/Min.
Tube Size
Customized
Tube Material
Quartz Tube
Warranty
One Year
Trademark
CY
Transport Package
Wooden Box
Specification
OD. 25mm
Origin
Zhengzhou, China
HS Code
85141090
Model NO.
CY-OTF-1200X-S-FB
Casing
Double Layer Steel
Mas.Temperature
1100c
Max.Heating Rate
20c/Min.
Tube Size
Customized
Tube Material
Quartz Tube
Warranty
One Year
Trademark
CY
Transport Package
Wooden Box
Specification
OD. 25mm
Origin
Zhengzhou, China
HS Code
85141090
Fluidized Bed Vertical Tube Furnace with 1'' O.D Quartz Tube and Flange for Powder CVD
 
OTF-1200X-S-FB is a UL/CSA ready to pass and  a Fluidized Bed Vertical Furnace with 1'' O.D Quartz Tube (2'' O.D enlarged central area) for powder CVD applications. It consists a vertical positioned cylindrical heating chamber which surrounds the quartz tube with a built-in filter right in the lower middle section of the central heating zone. Its filter is a porous (15~40 microns) quartz frit that allows the controlled gas flow pass through and  float the particles on a cushion of the gas stream where the interaction between the solid and gaseous materials take place.

 Specification
Fluidized Zone

 		Provides uniform distribution of the gas blast over the entire cross section of the tube chamber
Solid particles are suspended by an upward gas flowing
Excellent heat transfer and coating to every single suspended particle 
Processed materials can be discharged from the top side of the tube after the cap is been taken off
Note: The gas is passed upward through the fluidized bed at a high enough velocity to lift the particles. However, particles may be swept away from the tube chamber entirely if the velocity was set too high. Depends on the particle size, you may want to adjust the gas in pressure and flow rate until particles are lifted and move turbulently inside of the tube.
Quartz FritFrits with forced convection design can trap the particles within the central heating area
Frit: 15~40 microns porous, 22mm O.D x 4mm thick
             
Furnace CasingDouble layer steel structure with air cooling
Split door design for easy installation of tube
High purity Al2O3 fibrous insulation designed for maximum energy saving
Power1200W
VoltageAC 110V or 220V Single Phase, 50/60 Hz 
Max. Temperature1100oC
Continuous Temperature1000oC
Max. Heating Rate<= 20 oC /min
Tube Size
and Materials
 		One quartz tube is included. Main tube with bottom frit and enlarged space for particles processing
Two Ends: 25mm O.D, 22mm I.D; Central: 50mm O.D, 44mm I.D, for detailed size, please refer to the picture in below.
Central enlarged area ensures the high aerodynamic performance
Sealing Flanges
 		Bottom flange: Regular designed 1'' bottom flange with 1/4'' tube fitting for introducing primary gas 
Top Flange: Special designed 1'' top flange with backstreaming secondary (precursor) gas inlet and exhaust,
OptionalsDas delivery may be needed for gas control
Oxygen Monitoring: An Oxygen Sensor can be used to monitor the oxygen level of gas(es) used in CVD systems for preventing or reducing oxidation.
Heating Zone Length200mm  (single zone)
Constant Heating Zone100mm (+/-2oC)
Temperature Controller

 		30 programmable segments for precise control of heating rate, cooling rate and dwell time.
Built in PID Auto-Tune function with overheating & broken thermocouple protection.
Over temperature protection and alarm allows for operation without attendant(s).
+/- 1 ºC temperature accuracy.       
Heating ElementsFe-Cr-Al Alloy doped by Mo
Fitting Ports1/4'' Tube Fittings were installed on both sides of the flange for standard connection to the gas supplier
Dimensions340mm×300mm×1000mm ( W x L x H)
Net Weight~20 Kg (excluding mobile cart)
Shipping Weight200 lbs
Warranty One year limited warranty
ComplianceCE Certified
Fluidized Bed Vertical Tube Furnace with 1′′ O. D Quartz Tube and Flange for Powder CVD
Fluidized Bed Vertical Tube Furnace with 1′′ O. D Quartz Tube and Flange for Powder CVD
Fluidized Bed Vertical Tube Furnace with 1′′ O. D Quartz Tube and Flange for Powder CVD
Package

Fluidized Bed Vertical Tube Furnace with 1′′ O. D Quartz Tube and Flange for Powder CVD

Service
1. Factory prices with the best quality.
2. One year free-of-charge maintenance for all the dental equipment
3. Customized service for special demand
4. Fast and flexible delivery, by sea, by air, by express
5. Quick response within 24 hours
How to order
1. If you are interested in our products, please tell us the model number and quantity.
2. We will make a proforma invoice for your order.
3. We will deliver the product ASAP on receipt of the payment
Guarantee
1. Guarantee for one year after shipment.
Payment
1. Western Union
2. PayPal
3. Secure Payment through Alibaba
4. Telegraphic transfer
5. L/C

Factory

Zhengzhou CY Scientific Instrument Co., Ltd is mainly engaged in the research and development, design, manufacturing and sales of equipment used in scientific researches. Independence and innovation is the company's tenet.Our main products include: tube furnace, muffle furnace, plasma cleaner, vacuum furnace, atmosphere furnace,CVD system and customized lab equipment.Welcome you come to visit us. 

Fluidized Bed Vertical Tube Furnace with 1′′ O. D Quartz Tube and Flange for Powder CVD
Exhibition

Fluidized Bed Vertical Tube Furnace with 1′′ O. D Quartz Tube and Flange for Powder CVD

You Might Also Like