Products

Flat Diaphragm Pressure Sensor 4-20mA Pressure Sensor PC12-2

China Flat Diaphragm Pressure Sensor 4-20mA Pressure Sensor PC12-2, Find details about China Pressure Sensor, Pressure Transducer from Flat Diaphragm Pressure Sensor 4-20mA Pressure Sensor PC12-2

Model NO.
PC12-II
Thread Type
G, NPT, M
Wiring Type
Four-Wire
Measuring Medium
Gas, Liquid and Steam
IP Rating
IP65
Certification
CE, ISO, RoHS
Customized
Customized
Pressure Range
-100kpa...0~35kpa...10MPa
Pressure Reference
Gauge, Absolute, Sealed Gauge
Input Impedance
2KΩ-5KΩ
Zero Output
±2mv
Accuracy
±0.25%F.S. (Typical)
Excitation
1.5mA (Typical), 10VDC
Operating Temp.
-40ºC-125ºC
Housing Material
304
Diaphragm Material
316L
Oil Filling
M20
Trademark
WTsensor
Transport Package
Standard Export Packing with Carton
Origin
China
Model NO.
PC12-II
Thread Type
G, NPT, M
Wiring Type
Four-Wire
Measuring Medium
Gas, Liquid and Steam
IP Rating
IP65
Certification
CE, ISO, RoHS
Customized
Customized
Pressure Range
-100kpa...0~35kpa...10MPa
Pressure Reference
Gauge, Absolute, Sealed Gauge
Input Impedance
2KΩ-5KΩ
Zero Output
±2mv
Accuracy
±0.25%F.S. (Typical)
Excitation
1.5mA (Typical), 10VDC
Operating Temp.
-40ºC-125ºC
Housing Material
304
Diaphragm Material
316L
Oil Filling
M20
Trademark
WTsensor
Transport Package
Standard Export Packing with Carton
Origin
China
  • PC12-2 Flush Diaphragm Pressure Sensor with thread
  •  
  • Flush diaphragm pressure sensor with thread structure
  • Imported highly reliable pressure die
  • A single time silicon oil isolated filling technology
  • Compensation board filled with glue for protection against moisture
  • All stainless steel housing material
  • High accuracy, high reliability
  •  Strong anti-interference, good long-term stability
  • 18 months warranty period

The PC12-2 pressure sensor adopts food-grade oil filling technology. The perceived pressure is transmitted to the pressure chip through the oil to generate an electrical signal, and the compensation circuit corrects the pressure signal to a linear pressure signal. The product adopts flat membrane structure, easy to clean, high reliability, suitable for pressure and liquid level measurement of viscous fluids such as glue.

Caution  

1. Please do not touch the diaphragm by finger and other hard objects, or it may be damaged.

2. The sensor filled with olive oil is for sanitary application. It can't work when the temperature is below 0ºC, because the olive oil will freeze below 0ºC.
 

Pressure range
 
Pressure range-100kPa~0~35kPa…25MPa
Pressure referenceGauge pressure | Absolute pressure | Sealed gauge pressure
Excitation1.5mA recommended for constant current
Input impedanceConstant current: 2kΩ~5kΩ
Electrical connectionGold-plated KOVAR pin or silicon soft wire
Specification
 
Compensation tempConstant current: 0ºC~60ºC(≤70kPa),-10ºC~70ºC(other ranges);
Operating temp.-40ºC~120ºC
Storage temp.-40ºC~120ºC
Insulation resistance≥200MΩ/250VDC
Response time≤1ms (up to 90%FS)
Measured mediumAll the liquids and gases compatible with 316L
Mechanical vibration20g (20~5000Hz)
Shock100g (10ms)
Service life10×10 6 (cycles)
Input impedance2kΩ~5kΩ
Diaphragm material316L
Housing material316L
Oil fillingM20
Pin connectionKovar pin (0.6um Gold platted)
Weight135g(approx.)
 
Drawing

Flat Diaphragm Pressure Sensor 4-20mA Pressure Sensor PC12-2
 
How to order
Flat Diaphragm Pressure Sensor 4-20mA Pressure Sensor PC12-2
About Us:

Flat Diaphragm Pressure Sensor 4-20mA Pressure Sensor PC12-2

Flat Diaphragm Pressure Sensor 4-20mA Pressure Sensor PC12-2
Flat Diaphragm Pressure Sensor 4-20mA Pressure Sensor PC12-2

Certifications:
Flat Diaphragm Pressure Sensor 4-20mA Pressure Sensor PC12-2

FAQ:
1.    Q: Are you manufacturer or trading company?
        A: We are manufacturer which focuses on pressure sensor for 33 years.
2.    Q: What international certificates do you have?
        A: ISO9001, CE, RoHS Certificated.
3.    Q: What is your production capacity?
        A: We produced 1500000 pieces pressure sensor in year 2017.
4.    Q: What is the lead time of your product?
        A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization. 
       Note: lead time may vary base on different products. Please contact us for detailed lead time. 
5.    Q: What is the warranty of your products?
       A: Our warranty time is 18 months after shipment.
6.    Q: Do you provide customized products?
       A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
 

You Might Also Like