China 0-10V Constant Voltage 60W IP66 36V Dimmable LED Power Driver, Find details about China 36V Dimmable LED Power Driver, 0/1-10V 36V Dimmable LED Power Driver from 0-10V Constant Voltage 60W IP66 36V Dimmable LED Power Driver
Feature
· Output constant current.
· Universal AC input:100-265VAC
· Built-in active PFC function
· High efficiency up to 87%
· Protections:Short circuit/Over current/Over loading
· Cooling by free air convection
· Fully isolated plastic case with terminals IP60
· Class 2 power unit
· Three in one dimming function(0/1-10Vdc or PWM signal or resistance)
· Dimming range: 0-100%
· Suitable for LED lighting and moving sign applications
· Compliance to worldwide safety regulations for lighting
· Three years warranty
Specification
Model | KV-12060-A-DIM | KV-24060-A-DIM | KV-36060-A-DIM | KV-48060-A-DIM | |
Output | DC Voltage | 12V | 24V | 36V | 48V |
Voltage Tolerance | ±0.5V | ||||
Rated current | 0 - 5A | 0 - 2.5 A | 0 - 1.67A | 0 - 1.25A | |
Rated power | 60W | ||||
Input | Voltage Range | 100-265VAC | |||
Frequency Range | 47-63HZ | ||||
Power Factor | PF≥0.95/120VAC PF≥0.92/230VAC PF≥0.90/265VAC(Full loading) | ||||
Efficiency(Typ.) | 84% | 86% | 87% | 87% | |
AC Current(Max.) | 0.65A | 0.64A | 0.63A | 0.63A | |
Leakage current | <0.5mA
| ||||
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed | |||
Over Loading | ≤120% | ||||
Over Current | ≤1.2*Iout | ||||
Over temperature | 100ºC±10ºC, Shut down o/p voltage, recovers automatically after temp. goes down.
| ||||
Others | Net. Weight | 0.95KG | |||
Size | 200*70*43mm | ||||
packing | 310*240*165mm /10pcs /CTN | ||||
Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25ºC of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |