China Nfpa 20 Vertical Turbine Fire Pump, Vertical Turbine Pump, Centrifugal Pump, Water Pump, Find details about China Vertical Turbine Pump, Vertical Long-Shaft Pump from Nfpa 20 Vertical Turbine Fire Pump, Vertical Turbine Pump, Centrifugal Pump, Water Pump
2. Main Features
1. LP/LC series vertical turbine pump is fine designed with hydraulic design software. It makes impeller and other wearing parts have a long life because of anti-abrasive impeller and diffuser. LC series multistage vertical turbine pump is not only reliabole, safe, steady but also saving energy.
2. There is filter in pump inlet with proper hole, this can nor only prevent impurity entering pump to damage pump but also decrease inlet loss and increase pump effiency.
3. Impeller adopts balance hole to balance axial force. There is replaceable seal ring in front and back cover board of impeller to protect impeller and pump.
4. Pump middle shaft, water column and guard pipe are muti-burl, middle shaft uses technology of sleeve coupling. Water pipe can be more or less for different inundated depth according to user's requirement. Impeller and diffuser are multi-stage for different head.
5. Water pipe is connected by flange with guide bearing in its middle. Pump guide bearing adopts ethane or thordon bearing, it can also adopt rubber(whtn the temperature of liquid is over 55°C). Shaft is protected by guard column, the guide bearing should be supplied with exterior cooling lubricating water, while delivering sewage.
6. The remaining axial force of pump and the weight of rotor parts are borne by thrust bearing in motor seat or motor with thrust bearing. The thrust bearing is lubricated by dilute oil and cooled with exterior water. The thrust bearing can have element for monitoring temperature.
7. Pump shaft seal adopts packing seal, there is replaceable shaft sleeve in shaft seal and guide bearing to protect shaft and it is convenient to adjust axial location of impeller by nut in bearing parts upper end or pump coupling.
8. LP/LC series pump can be equipped with controller which can automatically start and stop pump according to liquid level, give an alarm for over loading and control many pumps in long-distance. There is automatic exhaust system for pump with diameter over 500mm.
3.Applications
1.widely used for water plant, irrigation.
2.Used for drainage pumping station, power station.
3.water circulation of air conditioning.
4.industrial water supply system, fire system.
5.shipping industry as well as the general purpose in the oil refining industry.
4.Performance Scope
1. Capacity: Up to 8400m3/h
2. Lift head: Up to 150m .
3. Rotary speed: 590r/min up to 2950r/min.
4. Drive power: Up to 2000kw