China Rx27 5wceramic Wire Wound Cement Power Resistors, Find details about China Cement Resistor, Fixed Resistor from Rx27 5wceramic Wire Wound Cement Power Resistors
Products | Cement type resistors (LW) | |||||||||||||||||
Specifications | ||||||||||||||||||
Part NO. RX | Dimensions | Resistance range | ||||||||||||||||
W± 1 | H± 1 | L± 1.5 | C± 3 | D± 0.05 | KN | MO | ||||||||||||
2W | 7 | 7 | 18 | 30 | 0.8 | 0.1~270 | 271~33K | |||||||||||
3W | 8 | 8 | 22 | 35 | 0.8 | 0.1~1K | 1K1~47K | |||||||||||
5W | 10 | 9 | 22 | 35 | 0.8 | 0.1~1K | 1K1~68K | |||||||||||
7W | 10 | 9 | 35 | 35 | 0.8 | 0.1~1K | 1K1~68K | |||||||||||
10W | 10 | 9 | 48 | 33 | 0.8 | 0.1~1K | 1K1~50K | |||||||||||
15W | 12.5 | 11.5 | 48 | 33 | 0.8 | 0.1~1K | 1K1~150K | |||||||||||
20W~25W | 14 | 13.5 | 60 | 33 | 0.8 | 0.1~1K | 1K1~150K | |||||||||||
Power rated Item | 2W | 3W | 5W | 7W | 10W | 15W | 20W~25W | |||||||||||
Max. working voltage | 150V | 350V | 350V | 500V | 750V | 1000V | 100V | |||||||||||
Dielectric withstanding voltage | 1000V (AC) | 1000V (AC) | 1000V (AC) | 1000V (AC) | 1000V (AC) | 1000V (AC) | 1000V (AC) | |||||||||||
Resistance tolerance | J± 5% | J± 5% | J± 5% | J± 5% | J± 5% | J± 5% | J± 5% | |||||||||||
Cement Type Resistor (wire wound) | ||||||||||||||||||
Characteristics | Specifications | Test Method | ||||||||||||||||
DC Resistance JIS-C-5202 5.1 | J ± 5% | AT 25° C | ||||||||||||||||
Dielectric withstanding voltage JIS-C-5202 5.7 | No evidence of flashover mechanical amage, arcing or insulation breakdown. | Resistance shall be clamped with a conductive material which conforms to resistors surface so that 90 o of the outer periphery is contacted a potential of 1000V AC shall be applied for 60 seconds. | ||||||||||||||||
Insulation Resistance JIS-C-5202 5.6 | 1000MΩ MIN | Withstanding test and shall be measured at DC 500V. Resistor shall be prepared AC same method of dielectric. | ||||||||||||||||
Thermal Shock | Δ R≤ ± (2%R0+0.1Ω ) | After application of rated power for 30 minutes, 30 minutes exposure to -30± 5° C ambient temperature. | ||||||||||||||||
Humidity JIS-C-5202 7.5 | Δ R≤ ± (2%R0+0.1Ω ) | Temperature resistance change after 1000 hours exposure in a humidity test chamber controlled at 40± 2° C and 90~95% relative humidity. | ||||||||||||||||
Cement Type Resistor (metal oxide film) | ||||||||||||||||||
Short time overload | Δ R≤ ± (2%R0+0.05Ω ) | Temperature resistance change after the application of a potential of 2.5 times RCVW for 5 seconds. | ||||||||||||||||
Load Life JIS-C-5202 7.10 | Δ R≤ ± (5%R0+0.1Ω ) | Permanent resistance change after 1000 hours operating at RCWV, with duty cycle of 1.5 hours on and 0.5 hours off at 25° C± 2° C. | ||||||||||||||||
Load Life in Humidity JIS-C-5202 7.9 | Δ R≤ ± (5%R0+0.1Ω ) | Temperature resistance change after 1000 hours(1.5hours on and 0.5 hours off) at RCVW in a humidity chamber controlled at 40± 2° C and 90~95% relative humidity. | ||||||||||||||||
Solderability JIS-C-5202 6.5 | 95% coverage MIN | Test temperature of solder: 230± 5° C Dwell time in solder: 3± 0.5 SEC | ||||||||||||||||
Nonflammability | Nonflammable | Load 5 min according to 5times, 10 times, 16 times rated power and A. C. respectively. |
Type | Rated Power(W) | Resistance range(Ω) | Dimensions(mm) | |||
A/B | C | Φ | h | |||
RX27-1-2 | 2 | 0.15-200 | 6.4±1 | 17.5±1.2 | 0.8 | 1.5 |
RX27-1-3 | 3 | 0.20-390 | 8.0±1 | 22.0±1.5 | 0.8 | 1.5 |
RX27-1-5 | 5 | 0.24-680 | 9.5±1 | 22.0±1.5 | 0.8 | 1.5 |
RX27-1-7 | 7 | 0.33-500 | 9.5±1 | 35.0±1.5 | 0.8 | 3.0 |
RX27-1-10 | 10 | 0.51-2000 | 9.5±1 | 48.0±1.5 | 0.8 | 3.0 |
RX27-1-15 | 15 | 1.00-2400 | 12.5±1.2 | 48.0±1.5 | 1.0 | |
RX27-1-20 | 20 | 1.00-3000 | 12.5±1.2 | 63.5±2.0 | 1.0 |