WiFi Repeater 5.8g Wireless Network Amplifier 2W 33dBm Signal Booster
China WiFi Repeater 5.8g Wireless Network Amplifier 2W 33dBm Signal Booster, Find details about China Cell Booster Network Repeaters, Cellular Range Extender from WiFi Repeater 5.8g Wireless Network Amplifier 2W 33dBm Signal Booster
Basic Info.
Model NO.
SHRC58G2WP
Item
2W 5.8GHz 35dBm WiFi Signal Booster
Sku
0305sh100318
Operating Range
5.0~5.875 GHz
Input Power
0~20 dBm
Transmit Gain
15-18dB
Output Power
2W (33dBm)
Supported Voltages
5V~16V/2A DC
Material
Cast Aluminum
Booster Size
7.3 X 3.8 X 1cm
Booster Weight
46g
Trademark
Sunhans
Transport Package
Carbon
Specification
15.2x10.2x1.4cm
Origin
China
Model NO.
SHRC58G2WP
Item
2W 5.8GHz 35dBm WiFi Signal Booster
Sku
0305sh100318
Operating Range
5.0~5.875 GHz
Input Power
0~20 dBm
Transmit Gain
15-18dB
Output Power
2W (33dBm)
Supported Voltages
5V~16V/2A DC
Material
Cast Aluminum
Booster Size
7.3 X 3.8 X 1cm
Booster Weight
46g
Trademark
Sunhans
Transport Package
Carbon
Specification
15.2x10.2x1.4cm
Origin
China
Product Desciption
Sunhans 5.8GHz Wireless Signal Booster 2W 33dBm WiFi Signal Repeater Amplifier Extender for Drones
Features:
Excitingly small! Only 46g!
5-16V wide voltage range;
5.8GHz, Max. 2000mW output power;
Aluminum-alloy case by CNC, anti-interference;
Full kit, easy to install; light weight, small size, protable;
Designed for Drones, UAV, RC equipment....
Cell phone Amplifier Description: 2000mW 5.8Ghz 33dBm WiFi Signal Booster
Package contents:
Product Description:
The 5.8GHz WLAN signal booster is designed for IEEE 802.11b/g/n Wireless LAN Applications.The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification. The signal booster can work with most WLAN/Wi-Fi device and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate.
SHRC58G2WP 5.8ghz 2w 33dBm is specially designed for UAV, drones, compatible perfectly with DJI, Yuneec, 3DR, XIRO, Parrot, JTT and Blade, also auitable for active speaker, router and so on.
1. What is the WiFi signal booster?
The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.
2. About LED lights.
1). A flashing green light indicates that the wifi signal booster is powered on.
2).Normal operation is a red light flashing green, indicating that the signal booster receives the signal from the device and sends a wifi signal.
3. Can I install the Sunhans booster myself?
Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.
About US
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.
♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
Features:
Excitingly small! Only 46g!
5-16V wide voltage range;
5.8GHz, Max. 2000mW output power;
Aluminum-alloy case by CNC, anti-interference;
Full kit, easy to install; light weight, small size, protable;
Designed for Drones, UAV, RC equipment....
Cell phone Amplifier Description: 2000mW 5.8Ghz 33dBm WiFi Signal Booster
| SKU | 0305SH100318 |
| Model | SHRC58G2WP |
| Operating Range | 5.0~5.875 GHz |
| Operating Mode | Bi-directional, half-duplex, time division duplex senses RF, carrier from transmitter and automatically switch receiving to transmitting mode |
| Input power | 0~20 dBm |
| Transmit gain | 15-18dB |
| Output Power | 2W (33dBm) |
| Receiver Gain | ≤ 12 dB |
| Noise Figure | ≤3.5 dB typical |
| Frequency Response | ±1dB over operating range |
| Connector type | SMA Receptacle 50ohm,To radio SMA female(hole inside),To antenna RP-SMA female(pin inside) |
| Power supply | 5V~16V/2A DC |
| Operating Temperature | -20°C to + 70°C |
| Operating Humidity | Up to 75% relative humidity |
| Material | Cast Aluminum |
| Booster Size | 7.3 x 3.8 x 1cm |
| Booster Weight | 46g |
| Package Size | 12 x 11 x 6.5cm |
| Package Weight | 180g |
Package contents:
- SH-RC58G2W eSunRc WiFi booster
- RG141 20cm cable SMA male to RP-SMA male
- DC 2.5" to 12V 5.5" adapter
- DC 2.5" to USB adapter
- DC 2.5" to JST adapter
- Mounting Velcro
- User Manual
Product Description:
The 5.8GHz WLAN signal booster is designed for IEEE 802.11b/g/n Wireless LAN Applications.The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification. The signal booster can work with most WLAN/Wi-Fi device and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate.
SHRC58G2WP 5.8ghz 2w 33dBm is specially designed for UAV, drones, compatible perfectly with DJI, Yuneec, 3DR, XIRO, Parrot, JTT and Blade, also auitable for active speaker, router and so on.
| Features: |
| 1. Easy Installation |
| 2. Plug and play, no software setup. |
| 3. 3.5dB ultra-low noise |
| 4. Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times. |
| 5. Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied |
| 6. Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc. |
1. What is the WiFi signal booster?
The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.
2. About LED lights.
1). A flashing green light indicates that the wifi signal booster is powered on.
2).Normal operation is a red light flashing green, indicating that the signal booster receives the signal from the device and sends a wifi signal.
3. Can I install the Sunhans booster myself?
Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.
About US
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.
♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......