Snowmobile Ski Wear Resistant Carbides
China Snowmobile Ski Wear Resistant Carbides, Find details about China Tips, Carbide Bar from Snowmobile Ski Wear Resistant Carbides
Basic Info.
Name
Replacement Wear Bars
Dimension
25.4 X 3.17mm X 3.17mm or Custom
Density
14.35 - 14.60 Grams/Cm3
Hardness
88.5 - 88.9 Rockwell a
T.R.S.
420 000 - 450 000 Psi
Trademark
Myloo
Transport Package
Standard
Specification
Tungsten carbide
Origin
Zigong, China
HS Code
843149
Name
Replacement Wear Bars
Dimension
25.4 X 3.17mm X 3.17mm or Custom
Density
14.35 - 14.60 Grams/Cm3
Hardness
88.5 - 88.9 Rockwell a
T.R.S.
420 000 - 450 000 Psi
Trademark
Myloo
Transport Package
Standard
Specification
Tungsten carbide
Origin
Zigong, China
HS Code
843149
Product Desciption
Tungsten Carbide Runner Replacement Wear Bars for Snowmobile Ski
How to ensure the wear life is what we care most . The carbide tips brazed into Snow Mobile SKI Bar, is
highly wear-resistant, can extremely reduce bar body abrastion. The quality stability of tungsten carbide tips
is the core for snow mobile ski bar. We follow strict quality control from the begining of raw materials, to last
step inspection.
Carbide runner maintenance can be one of the most important safety decisions you make with your
snowmobile each year. Carbides could be the difference between sliding through an icy corner, or not being
able to steer out the way of someone who isn't making a corner. If you cannot turn while riding icy conditions,
it's time to maintain or replace your carbides.
Standard Grade YG10C:
Density: 14.35 - 14.60 grams/cm3
Hardness: 88.5 - 88.9 Rockwell A
T.R.S.: 2800 - 3200 Mpa
Porosity:A02B00C00
Grain size:2.4μm
Why Myloo Carbides?
-Coarse enough of grain size to be favorable for welding, especially in cold weather.
-Lower Cobalt without broken, longer wear-resistance. We never stop finding better grade with much longer
wear-resistance to save customers' cost.
-Much strict control on scrap carbide to ensure stable quality of carbide powder. All is from qualified carbide
rods with grain size 0.8-1.0um, like end mill, reamer, drills.
-Our special creative sintering process to ensure uniform grain size 2.4um. We use Vacuum Sintering Furnace
with "secret" temperature without heat-difference to ensure uniform grain size 2.4um.
Q&A:
1. Why You Say Your Tungsten Carbides Have Much Better Performance?
-Coarse enough of grain size to be favorable for welding, especially in cold weather.
- Lower Cobalt without broken, longer wear-resistance.
We never stop finding better grade with much longer wear-resistance to save clients' cost. Now we are testing
new grade with coarse grain size for Europe market, it works well. Also we are making another 3 kinds of new
grade to test and compare with current grade. If it goes well, next step we will try to test it for America market first.
2.How You Control the Quality of The Carbides?
-Much strict control on scrap carbide to ensure stable quality of carbide powder.
All is from qualified carbide rods with grain size 0.8-1.0um, like end mill, reamer, drills. Other carbide
manufacturers usually use carbide drill bits or anvil with grain size 1.2/1.6/2.0 mixed.
-Our special creative sintering process to ensure uniform grain size 2.4um.
Carbide manufacturers usually sinter it by Intermediate Frequency Furnace with temperature 1500ºC, that the
heat-difference can be 70-80ºC causing non-uniform grain size. We use Vacuum Sintering Furnace with "secret"
temperature without heat-difference to ensure uniform grain size 2.4um.
3.Do You Accept OEM&ODM?
Yes, for sure, we can cutomize the grade and shape upon your drawings or samples. Such as, make the grain coarse or add
more cobalt to increase its hardness. Make balance between hardness and toughness.
How to ensure the wear life is what we care most . The carbide tips brazed into Snow Mobile SKI Bar, is
highly wear-resistant, can extremely reduce bar body abrastion. The quality stability of tungsten carbide tips
is the core for snow mobile ski bar. We follow strict quality control from the begining of raw materials, to last
step inspection.
Carbide runner maintenance can be one of the most important safety decisions you make with your
snowmobile each year. Carbides could be the difference between sliding through an icy corner, or not being
able to steer out the way of someone who isn't making a corner. If you cannot turn while riding icy conditions,
it's time to maintain or replace your carbides.
Standard Grade YG10C:
Density: 14.35 - 14.60 grams/cm3
Hardness: 88.5 - 88.9 Rockwell A
T.R.S.: 2800 - 3200 Mpa
Porosity:A02B00C00
Grain size:2.4μm
Why Myloo Carbides?
-Coarse enough of grain size to be favorable for welding, especially in cold weather.
-Lower Cobalt without broken, longer wear-resistance. We never stop finding better grade with much longer
wear-resistance to save customers' cost.
-Much strict control on scrap carbide to ensure stable quality of carbide powder. All is from qualified carbide
rods with grain size 0.8-1.0um, like end mill, reamer, drills.
-Our special creative sintering process to ensure uniform grain size 2.4um. We use Vacuum Sintering Furnace
with "secret" temperature without heat-difference to ensure uniform grain size 2.4um.
A 60-degree cut will give you more bite when the carbides are new, but because more of the weight focused
on a point, it will wear out faster. A 90-degree carbide will not give you as much bite when new but will last
much longer and provide the best traction in the long run.
Q&A:
1. Why You Say Your Tungsten Carbides Have Much Better Performance?
-Coarse enough of grain size to be favorable for welding, especially in cold weather.
- Lower Cobalt without broken, longer wear-resistance.
We never stop finding better grade with much longer wear-resistance to save clients' cost. Now we are testing
new grade with coarse grain size for Europe market, it works well. Also we are making another 3 kinds of new
grade to test and compare with current grade. If it goes well, next step we will try to test it for America market first.
2.How You Control the Quality of The Carbides?
-Much strict control on scrap carbide to ensure stable quality of carbide powder.
All is from qualified carbide rods with grain size 0.8-1.0um, like end mill, reamer, drills. Other carbide
manufacturers usually use carbide drill bits or anvil with grain size 1.2/1.6/2.0 mixed.
-Our special creative sintering process to ensure uniform grain size 2.4um.
Carbide manufacturers usually sinter it by Intermediate Frequency Furnace with temperature 1500ºC, that the
heat-difference can be 70-80ºC causing non-uniform grain size. We use Vacuum Sintering Furnace with "secret"
temperature without heat-difference to ensure uniform grain size 2.4um.
3.Do You Accept OEM&ODM?
Yes, for sure, we can cutomize the grade and shape upon your drawings or samples. Such as, make the grain coarse or add
more cobalt to increase its hardness. Make balance between hardness and toughness.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......