Products

High Quality Tungsten Carbide Drawing Die-Wire and Bar Drawing Die

China High Quality Tungsten Carbide Drawing Die-Wire and Bar Drawing Die, Find details about China Cemented Carbide Die, Tungsten Carbide Dies from High Quality Tungsten Carbide Drawing Die-Wire and Bar Drawing Die

Model NO.
all sizes
Condition
New
Shaping Mode
Compression
Density
According to The Specific Grade
Flexure Strength
According to The Specific Grade
Hardness
According to The Specific Grade
Products Type
Drawing Dies
Trademark
ZZKD
Transport Package
in Plywood Box (Neutral-Packing)
Specification
by customers′requirement
Origin
China
HS Code
8208101900
Model NO.
all sizes
Condition
New
Shaping Mode
Compression
Density
According to The Specific Grade
Flexure Strength
According to The Specific Grade
Hardness
According to The Specific Grade
Products Type
Drawing Dies
Trademark
ZZKD
Transport Package
in Plywood Box (Neutral-Packing)
Specification
by customers′requirement
Origin
China
HS Code
8208101900
Tungsten carbide drawing die has a wide range of uses, such as electronic devices, radar, television, instrumentation, and aerospace and other high-precision wire and commonly used tungsten wire, molybdenum wire, stainless steel wire, alloy wire and cable wire. A variety of diamond wire drawing dies are pulled out for use. Diamond wire drawing die use natural diamond used as the raw material, which has strong wear resistance, high service life.

Grades,properties and applications cemented carbide wire drawing dies.
 
Grade		Density
g/cm3		Hardnes HRAT.R.S
MP a		Performance&application
recommended		ISO
Y
 
M3A		 
 
15.1		 
 
94.0		 
 
1700		Excellent wear resistance ,suitable for drawing steel,nonferrous metal andd alloy wires less than Φ2mm under low stress ,eapecially having better effect for drawing fine wires less than Φ0.6mm. 
 
 
K10
 
YM3X		 
15.2		 
92.0		 
1800
 
 
YM6X		 
 
14.85		 
 
91.5		 
 
2300		Good wear resistance ,suitable for drawing steel wires,nonferrous metal wires and alloy wires or bars less thanΦ6mm under low stress. 
 
 
 
 
K10
 
 
YM6		 
 
14.9		 
 
90.5		 
 
2400		Good wear resistance ,suitable for drawing steel, nonferrous metal and bars less thanΦ20mm under high stress,also for drawing tubes less thanΦ10mm
YM8X14.6591.52900Good wear resistance and strength , suitable for drawing all kinds of wires and bars. 
 
 
 
K20
 
 
YM8		 
 
14.70		 
 
89.8		 
 
2800		Good wear resistance and strength , suitable for drawing steel, nonferrous metal and alloy bars less thanΦ50mm under high stress,also for drawing tubes less thanΦ35mm
YM1514873000Suitable for drawing steel bars and tubes under very high stress.K40
Other grades may  be offered by customers' requirements

 

You Might Also Like