PAC LS01
The product is white or pale yellow powder, spray dry type. It is suitable for dinking water, high purity raw water treatment, sizing agent for paper making.

PROPERTIES
1. Its dosage lower than aluminum sulfate (based on Al2O3) and water treatment cost is lower than other inorganic flocculants.

2. The product can cause quick formation of flocs, big flocs formation and rapid precipitation. Its treatment capacity is 1.3-3.0 times of other inorganic flocculants.

3. It enjoys wide-range adaptability for different-temperature source water and a good solubility.

4. It is slightly corrosive and easy for operation.

5. The liquid product is suitable for automatic dosing. Furthermore, it will not block pipes over long-time Usage.

Specifications
Specifications Data
Appearance White or pale yellow powder
Al2O3 %29.0 min
Basicity %40-90
Insoluble substance %≤ 0.5
pH Value (1% water solution)3.5-5.0
SO42- %≤ 9.8
N %≤ 0.09
As %≤ 0.0005
Cr 6+ %≤ 0.0015
Hg %≤ 0.00002
Pb %≤ 0.003
CD %≤ 0.0006

APPLICATION METHODS
1. The liquid product can be dosed directly or dosed after dilution. As for the solid product, dilution is necessary before being dosed. Water amount for dilution shall be determined based on the amount of the chemical to be dosed and the quality of water to be treated. Dilution proportion for solid product is 2%-20%, and for liquid product, 5%-50%(based on weight percentage).

2. The dosage of the liquid product is 3-40g/MT and the dosage of the solid product is 1-15g/MT. The specific dosage is based on the flocculation test and on the trial.

3. Its acidity is lower than other inorganic coagulants.




PACKAGE AND STORAGE

1. The solid product is packaged in 25kg polypropylene woven bagswith inner plastics bags.

2. The liquid product can be stored for one year without losing its effect, while the solid product, for two years. The product should be stored in a dry and ventilative room, but the effect will not be affected even if it gets wet.




Susan Shi
Sales Manager
Wuxi Lansen Chemicals Co., Ltd