100ml 240ml 300ml 500ml HDPE Plastic Bottle Extrusion Blowing Mold Making Machine
China 100ml 240ml 300ml 500ml HDPE Plastic Bottle Extrusion Blowing Mold Making Machine, Find details about China HDPE Bottle Making Machine, Plastic Bottle Making Machine from 100ml 240ml 300ml 500ml HDPE Plastic Bottle Extrusion Blowing Mold Making Machine
Basic Info.
Model NO.
TDB-70A
Auto-Deflashing Device
Yes
Second Name
Blow Moulding Machine
Third Name
Extrusion Blow Molding Machine
Motor
Siemens
After Sales Service
Engineer Overseas Working
Raw Material
HDPE
Making Method of Parison
Extrusion-Blow Molding
Automation
Automatic
Computerized
Computerized
Certification
CE, ISO9001:2008
Trademark
SINO-TECH
Transport Package
Iron Tray or Wooden Case
Specification
CE, ISO9001
Origin
Made in China
HS Code
8477301000
Model NO.
TDB-70A
Auto-Deflashing Device
Yes
Second Name
Blow Moulding Machine
Third Name
Extrusion Blow Molding Machine
Motor
Siemens
After Sales Service
Engineer Overseas Working
Raw Material
HDPE
Making Method of Parison
Extrusion-Blow Molding
Automation
Automatic
Computerized
Computerized
Certification
CE, ISO9001:2008
Trademark
SINO-TECH
Transport Package
Iron Tray or Wooden Case
Specification
CE, ISO9001
Origin
Made in China
HS Code
8477301000
Product Desciption
100ml 240ml 300ml 500ml HDPE plastic bottle extrusion blowing mold making machine
Asone of the biggest factory for blow molding machine in China, we have already exported to over 60 countries in the world, like America, England, Sri Lanka, Italy Switzerland, Newzealand, Egypt.etc. In 2009, we manufactured successfully a 3000 liter blow molding machine which is the biggest one in China.
Maximum Volume: 5 litter
Material: HDPE, PP, PVC, PETG etc.
View Stripe matchable
Easy operation
Automatically
1>Double station and single satation
2>Single mould head to six mould head
3>Mutli-layer with View Strip line
4> It can match auto-deflashing device, Leak detector, Chiller and crusher recycle system.
5> The daliy output(24 hours) can reach approximately from 5, 000 to 86, 000; It can produce from 0.2-5L plastic hollow bottle products.
A.Brief Introduction
DMK-L series are fully-automatic pet stretch-blow molding machines(preheat). It has 3 to 16 cavities and the maximum capacity of the products is 2000mL. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6000BPH(6-cavity), 8000BPH(8-cavity), 12000BPH(12-cavity), 16000BPH(16-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
B.Settings:
a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand
C.Machine Features:
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
Blow Molding Machine Picture:
Processing Machine:
Any question,please call me.
MOB&waspp: +8613773240086
Asone of the biggest factory for blow molding machine in China, we have already exported to over 60 countries in the world, like America, England, Sri Lanka, Italy Switzerland, Newzealand, Egypt.etc. In 2009, we manufactured successfully a 3000 liter blow molding machine which is the biggest one in China.
Maximum Volume: 5 litter
Material: HDPE, PP, PVC, PETG etc.
View Stripe matchable
Easy operation
Automatically
1>Double station and single satation
2>Single mould head to six mould head
3>Mutli-layer with View Strip line
4> It can match auto-deflashing device, Leak detector, Chiller and crusher recycle system.
5> The daliy output(24 hours) can reach approximately from 5, 000 to 86, 000; It can produce from 0.2-5L plastic hollow bottle products.
A.Brief Introduction
DMK-L series are fully-automatic pet stretch-blow molding machines(preheat). It has 3 to 16 cavities and the maximum capacity of the products is 2000mL. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6000BPH(6-cavity), 8000BPH(8-cavity), 12000BPH(12-cavity), 16000BPH(16-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
B.Settings:
a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand
C.Machine Features:
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
Blow Molding Machine Picture:
Processing Machine:
| Basic parameter | Material | PE.PP... | |||
| Max.product volume | 2L | ||||
| Cycle time | 800pcs | ||||
| Measurement | LXWXH=3.5x2.2x2.8 (meter) | ||||
| Weight | 6T | ||||
| General power | 33.9KW | ||||
| Average power consumption | 22KW/H (The is the exactly power consumption) | ||||
| Plasticizing system | Specification | extrusion system can be applicable to various of raw material, plasticizing capability is good and output is high,transducer adjust speed,collect temperature-control signals and prevent the screw from cold starting | |||
| Speed reducer | hard-teeth, low noise and wear-resistant speed reducer | ||||
| Machine barrel screw | Ø70mm,L/D=24, 38CrMoALA high quality nitriding steel | ||||
| Plasticizing | 85Kg/H(HDPE) | ||||
| Heating zone | 4 zone | ||||
| Heating power | 16KW/H | ||||
| Extrude motor power | three phase a synchronism(380V.50HZ) | ||||
| cooling fanner | 4 zone power:85W | ||||
| Extrusion system | Specification | Patented central material feeding mold head that is quick in changing colors | |||
| Die head | 40Cr high quality nitriding steel | ||||
| Structure of die head | Shan Tou | ||||
| Mold center distance | -- | ||||
| Max diameter of die heat | Ø145mm | ||||
| Heating zone | 4 zone | ||||
| Heating power | 16KW | ||||
| Opening and clamping mold | Specification | Gear wheel and rack in-phase aim at twin shaft clamping device and cylinder | |||
| clamping force | 105KN | ||||
| Distance of mold platen | 188-538mm | ||||
| mold platen dimension | WXH:338x450mm | ||||
| Max mold dimension | WXHX:450x500 | ||||
| mold fix mode | bolt compaction | ||||
| Electric control system | Specification | PLC.colo.touch screen,standardization blowing shaping machine control system (MITSUBISHI programmable controller) | |||
| human-machine | color touch screen,trouble auto alarm, diagnose the system | ||||
| Temperature control | self-regulation | ||||
| Temperature control | adopt Japanese Mitsubishi PLC control system | ||||
| protection function | Automatic alert and breakdown feedback double protection of mechanical apparatus | ||||
| Hydraulic system | Specification | proportion pressure controller changing direction quickly and softly | |||
| human-machine electromotor | three phase a synchronism (380V,50HZ),11KW | ||||
| Hydraulic pump | adopt double-lamina pump | ||||
| Hydraulic valve | imported hydraulic components | ||||
| Vitta | high pressureVitta | ||||
| system pressure | 60Kg/cm² | ||||
| cooling mode | Water-cooled | ||||
| Pneumatic system | Specification | imported and famous brand pneumatic pressure | |||
| Air pressure | 0.6Mpa | ||||
| Air | 0.7M 3 /min | ||||
| Valve | FESTO | ||||
| Cooling system | Specification | mold,barrel,oil box adopt independentcooling waterway | |||
| cooling medium | water | ||||
| Water flux | 60L/min | ||||
| Water pressure | 0.3MPa | ||||
Any question,please call me.
MOB&waspp: +8613773240086
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......