Products

Alc AAC Block Wall Construction Precast Concrete Prefab Building Materials

China Alc AAC Block Wall Construction Precast Concrete Prefab Building Materials, Find details about China Alc, AAC Block Wall Construction from Alc AAC Block Wall Construction Precast Concrete Prefab Building Materials

Trademark
Ecotrend
Origin
Cambodia
HS Code
68109190
Trademark
Ecotrend
Origin
Cambodia
HS Code
68109190
ALC AAC Block Wall Construction Precast Concrete Prefab Building Materials

Product Details
Brief Introduction
Ecotrend AAC Roof Panels are load-bearing reinforced products used in social and commercial construction.in most structures, a significant amount of energy is lost through the roof, but Ecotrend AAC roof panels reduce the amount of thermal transmission. Roof panels are reinforced units used to build roof and floor slabs that work simply supported by walls,and also by steel,concrete or wood structures.

Specification
Specification
(mm)		ShapeCompressive Strength(MPa/m³)Average Density(kg/m³)
With GrooveFlatAverage ValueMin Value
< 2000x600x75√ ≥5.0≥4.0≤625
< 3000x600x100√ ≥5.0≥4.0≤625
< 3500x600x125√ ≥5.0≥4.0≤625
< 4200x600x150√ ≥5.0≥4.0≤625
<4800x600x200√ ≥5.0≥4.0≤625

Recommend Size
Thickness(mm)75100125150175200
Intensity of Pressure(N/m2)Maximal Length (mm)
800200030003500420048005200
1000200030003500420048005200
1200196029203400408046405200
1400192028403300396044805200
1600188027603200384043204950
1800184026803100372041604900
2000180026003000360040004800
2200---25002850335037504700

Main Performance Index
PerformanceB04 GradeB05 GradeB06 Grade
Dry Density(kg/CBM)≤425≤525≤625
Compressive Strength(Mpa/CBM)A2.5A3.5A5.0
Thermal Conductivity0.110.130.15
Drying Shrinkage(mm/m)≤0.5
Freezing ResistanceQuality Loss(%)≤3.0 ≤3.0≤5.0
Strength after Freezing(Mpa)≥2.0≥3.2≥4.0
Softening Factor0.88
Penetration Resistance88.3
Fire Resistance(Hour)≥4 hour(Panel Wall Thickness:100mm)
Average Sound Insulation(d B)40.8(Panel thickness:100mm, with double sides putty)
Size Deviation(mm)Length±2, Width±1, Thickness±1
Common specificationsWidth 600mm ,Thickness 75,100,125,150,200mm

Application 
Ecotrend AAC roof panel is widely use as building roof insulation layer..
Alc AAC Block Wall Construction Precast Concrete Prefab Building Materials 

Strict Production Process
Ecotrend manufactures autoclaved aerated concrete (AAC) or aerated lightweight concrete (ALC) products, it is a composite of cement, lime, and silica sand. Besides, ALC panel uses bidirectional welded steel mesh (reinforcing bar) .
The production of AAC Panel including 8 main process including production of reinforcing steel mesh, anti-rust of reinforcing steel mesh, mixing, pouring, insert of reinforcing steel mesh, precuring, cutting, autocalved curing, packing.

Alc AAC Block Wall Construction Precast Concrete Prefab Building Materials 

Packing& Shipping
When packing, we usually use plastic-steel tape to fix AAC panels or AAC blocks, and use cardboard or plastic protective film to protect the corners to avoid damage during transportation. According to the packaging requirements of different customers, we will do our best to meet the special packaging requirements.
We usually use sea containers for export transportation. Our minimum order quantity is 1unit 20ft container, which is also the most economical transportation method.
Alc AAC Block Wall Construction Precast Concrete Prefab Building Materials 

Product Installation 
Below is brief installation method for AAC Panel, if you need further information about installation, feel free contact me.
Step 15 workers form a group. Use hydraulic trolley for transportation. Panels should be kept flat during the transportation. 
Pulling on the floor or unilateral support is forbidden during transportation. Use special fixture when lifting. 
Hoisting belt should be flexible nylon tie belt.
Step 2Use 1:3 cement mortar on the bottom of the panel to make level, mortar thickness is 10-20mm.
Step 3While installation, one worker uses a chain hoist to make the panel stand up, other workers stabilize the panel to the corresponding location.
Step 4Each panel should be connected to major structure by a special U-Card which is shot on the panels by nail gun.
Step 5After panel is upright, adjust the verticality by a wadge stuffed on the bottom of the panel. 
Step 6Groove between panels to bite each other should be close. Pay attention to control the verticality during the installation, 
and check up carefully after installation.
Step 7Gap between panels to be caulked by special mortar, and extra mortar should be pushed out while connecting panels. 
Then clean up adhesive cracks between panels, and use specialized pointing mortar to fill up gaps and level out.
Step 8Gap between panels to be caulked by special mortar, and extra mortar should be pushed out while connecting panels. 
Then clean up adhesive cracks between panels, and use specialized pointing mortar to fill up gaps and level out.
Step 9Finished

Alc AAC Block Wall Construction Precast Concrete Prefab Building Materials


Why Choose Ecotrend AAC Roof Panel

1. Lightweight
The dry density of Ecotrend AAC products is generally 400~700kg/m³, which is equivalent to one-third of clay bricks and one-fourth of concrete, meanwhile it is also lower than general lightweight aggregate concrete, if Ecotrend AAC products is used , transportation costs, energy and labor costs could be saved.

2. High strength
Ecotrend AAC products have high dimensional accuracy. If thin-layer mortar is used for masonry, the strength utilization factor is greatly improved. The strength of masonry is about 80% of the strength of the Panel itself, which is 30% stronger than that of clay bricks. In addition, steel bars can be configured according to design requirements in order to meet different needs.

3. Leading manufacturer in Southeast Asia
400,000CBM Annual Production Capacity

4. Convenient transportation
Ecotrend factory is very close to Sihanouk Ville port, only 20 minutes driving from our factory the port.

5. Advanced building material technology
Full-automatic Production Lines is applied to manufacture Ecotrend AAC blocks/panels, in order to ensure the product quality, product capacity and delivery time.

6. Strong technical Support
We provide one-stop service, technical support is provided via entire construction project, including design, production, installation. We can help our clients purchase the related AAC products accessories for their projects.


Related Product Recommendation
 

Please click below picture for more information about AAC block

About Us
 
Huafei Express Import & Export Co., Ltd is located in Hangzhou city, it is the headquarter and marketing center of Ecotrend (Cambodia) New Building Materials Development Co., Ltd, they share the same shareholders. 
Ecotrend is a Chinese-invested enterprise established in the Kingdom of Cambodia, specializing in the development, manufacture and export of eco-friendly, energy-efficient new building materials--- autoclaved aerated concrete (autoclaved lightweight concrete) products (known as AAC or ALC products).  
Ecotrend is located at Sihanouk Ville Special Economic Zone, Cambodia. The company occupies land area of about 25000 square meters; and total investment of more than 14 million dollars. 
Ecotrend has introduced world's advanced aerated concrete production line to produce AAC blocks and ALC panels (ALC panel belongs to prefabricated building materials). The company has annual production capacity of 400,000 cubic meters, which is the largest and only ALC panel manufacturing enterprise with green prefabricated building material in Cambodia. Since it only about 20-minutes driving from Sihanouk Ville Port, thus, Ecotrend is endowed with unique geographical advantage for exporting.  
If you are interested in our products, please feel free to contact us. And we are here sincerely welcome you to visit our site.Alc AAC Block Wall Construction Precast Concrete Prefab Building Materials
Ecotrend Factory in Sihanouk Ville, Cambodia

 
Alc AAC Block Wall Construction Precast Concrete Prefab Building Materials
Huafei Express Office in Hangzhou, China


 
Alc AAC Block Wall Construction Precast Concrete Prefab Building Materials 
Production Line


 
Alc AAC Block Wall Construction Precast Concrete Prefab Building Materials 
Warehouse& Storage

 

Contact Us
Hangzhou Huafei Express Import and Export Co., Ltd.( Headquarters)
Add: Room.1101, Huijin Financial Center, No.148 Jincheng Road, Xiaoshan District, Hangzhou City, Zhejiang, China  (Marketing Center)
Ecotrend (Cambodia) New Building Materials Development Co., Ltd.( Factory)
Add: Sihanoukville Special Economy Zone, National Road #4, Phum Pou Thoeung, Bet Trang Commune, Prey Nob District, Sihanoukville Province, Cambodia. 
Website: aacpanel.en.made-in-china.com

FAQ
Q: What is the relationship between Hangzhou Huafei Express Import and Export Co., Ltd and Ecotrend (Cambodia) New Building Materials Development Co., Ltd?
A: They share the same shareholder. HuaFei Express is the marketing center located in China. Ecotrend is the manufacturer of AAC/ALC product established in Cambodia.
Q: Which port will you export your products?
A: For AAC/ALC products, we will export from Sihanouk Ville Port, Cambodia; for accessories or other related products, we will export from Shanghai or Ningbo Port, China.
 

You Might Also Like