Megatro 115kv Four Circuit Tangent Lattice Tower (MGP-FT115)
China Megatro 115kv Four Circuit Tangent Lattice Tower (MGP-FT115), Find details about China 115kv Four Circuit Tangent Lattice Tower, 115kv Transmission Tower from Megatro 115kv Four Circuit Tangent Lattice Tower (MGP-FT115)
Basic Info.
Model NO.
MGP-FT115
Structure
115kv Four Circuit Tangent Lattice Tower
We Design by Pls& Tower Software
According to Client Requirements
Trademark
MEGATRO
Transport Package
Export Standard Package
Specification
ACCORDING TO CLIENT
Origin
Shandong, China
HS Code
73082000
Model NO.
MGP-FT115
Structure
115kv Four Circuit Tangent Lattice Tower
We Design by Pls& Tower Software
According to Client Requirements
Trademark
MEGATRO
Transport Package
Export Standard Package
Specification
ACCORDING TO CLIENT
Origin
Shandong, China
HS Code
73082000
Package size per unit product
8900.00cm * 600.00cm * 600.00cm
Gross weight per unit product
1200.000kg
Product Desciption
Megatro 115KV four circuit tangent lattice tower
In power transmission line project, where the conductors are straight, a tangent tower is used. Tower structures are classified as tangent suspension and tangent strain. This type tower most adopt vertical configuration with ACSR conductor. Sometimes we need multi circuit for power transmission line tower and adopt Multi circuit tangent lattice transmission tower.
This photo refer to our 115KV four circuit tangent lattice tower, which have double circuit line and every circuit have three phase ACSR conductor. This 115KV four circuit tangent transmission line tower is widely used in oversea market, especially in western countries.
Since 2004, MEGATRO had produce and design every type of 115KV four circuit tangent lattice tower for our overseas clients. MEGATRO can optimized design and make tower less weight, high strength, proper span distance, good wind resistance, and economy in the use of materials, especially in tower design, we can make final weight lower, with maximum utility of material and make total structure more strong and sturdy. MEGATRO is equipped with sophisticated machinery and equipment for the manufacture of 115KV four circuit tangent tower, and offers a variety of designs to meet client specific.
Our main design engineer from USA, can use PLS &TOWER software to design every type steel tower based on structural calculations and geometrical frame drawings. To meet the expectation, we produce shop drawings, components list and full production documentation, and even complete 3D models that facilitate the elimination of all design and drawings errors generated on the drawings. Another advantage is our 3D design and loading & design report, and can optimized the design and save cost for our clients.
MEGATRO had professional QA &QC team to control quality and execute strict QC & QC plan as per client requirements. MEGATRO is one of the few manufactures who assemble a face of 115KV overhead transmission line tangent steel tower. After fabrication all 115KV four circuit transmission line tangent steel towers, are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.
MEGATRO is one of the few manufactures who assemble a face of every tower section. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.
Other information
Place of Origin: Qingdao, Shandong, China.
Availability size: Based on the customer's requirements
Material: Chinese material or as per clients requirement
Fabrication: Based on the customer's drawings and technical requirements
Package: Both parties discuss and agreed before delivery
Terms of Payment: L/C, T/T
Minimum Order Quantity: 1 set
Port of Loading: Qingdao Port
Delivery Time: One month or based on the customer's needs
Fabrication standard: Chinese Standard or other standard which client accepted
Steel grades
Tower legs: Chinese steel Q345B, which same to ASTM A572 GR50
Other webs, bracing and not stress plate and angle steel: Chinese Q235B, which same to ASTM A36
Plates: Chinese steel Q345B, which same to ASTM A572 GR50
Bolts: Chinese grade 6.8 and 8.8, which similar to ASTM A394
A) Dimension and tolerance for angle are according to GB/T1591-1994, similar to EN 10056-1/2
B) Hot dip galvanization in accordance with GB/T 13912-2002, which similar to ASTM A 123
C) The welding will be performance in accordance with AWS D1.1 or CWB standard
If any special requirement, we can design and discuss with client.
In power transmission line project, where the conductors are straight, a tangent tower is used. Tower structures are classified as tangent suspension and tangent strain. This type tower most adopt vertical configuration with ACSR conductor. Sometimes we need multi circuit for power transmission line tower and adopt Multi circuit tangent lattice transmission tower.
This photo refer to our 115KV four circuit tangent lattice tower, which have double circuit line and every circuit have three phase ACSR conductor. This 115KV four circuit tangent transmission line tower is widely used in oversea market, especially in western countries.
Since 2004, MEGATRO had produce and design every type of 115KV four circuit tangent lattice tower for our overseas clients. MEGATRO can optimized design and make tower less weight, high strength, proper span distance, good wind resistance, and economy in the use of materials, especially in tower design, we can make final weight lower, with maximum utility of material and make total structure more strong and sturdy. MEGATRO is equipped with sophisticated machinery and equipment for the manufacture of 115KV four circuit tangent tower, and offers a variety of designs to meet client specific.
Our main design engineer from USA, can use PLS &TOWER software to design every type steel tower based on structural calculations and geometrical frame drawings. To meet the expectation, we produce shop drawings, components list and full production documentation, and even complete 3D models that facilitate the elimination of all design and drawings errors generated on the drawings. Another advantage is our 3D design and loading & design report, and can optimized the design and save cost for our clients.
MEGATRO had professional QA &QC team to control quality and execute strict QC & QC plan as per client requirements. MEGATRO is one of the few manufactures who assemble a face of 115KV overhead transmission line tangent steel tower. After fabrication all 115KV four circuit transmission line tangent steel towers, are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.
MEGATRO is one of the few manufactures who assemble a face of every tower section. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.
Other information
Place of Origin: Qingdao, Shandong, China.
Availability size: Based on the customer's requirements
Material: Chinese material or as per clients requirement
Fabrication: Based on the customer's drawings and technical requirements
Package: Both parties discuss and agreed before delivery
Terms of Payment: L/C, T/T
Minimum Order Quantity: 1 set
Port of Loading: Qingdao Port
Delivery Time: One month or based on the customer's needs
Fabrication standard: Chinese Standard or other standard which client accepted
Steel grades
Tower legs: Chinese steel Q345B, which same to ASTM A572 GR50
Other webs, bracing and not stress plate and angle steel: Chinese Q235B, which same to ASTM A36
Plates: Chinese steel Q345B, which same to ASTM A572 GR50
Bolts: Chinese grade 6.8 and 8.8, which similar to ASTM A394
A) Dimension and tolerance for angle are according to GB/T1591-1994, similar to EN 10056-1/2
B) Hot dip galvanization in accordance with GB/T 13912-2002, which similar to ASTM A 123
C) The welding will be performance in accordance with AWS D1.1 or CWB standard
If any special requirement, we can design and discuss with client.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......