6kVA Outdoor Online UPS

China 6kVA Outdoor Online UPS, Find details about China 6kVA UPS, UPS from 6kVA Outdoor Online UPS

Model NO.
PHS-6K
Standby UPS
Sine Wave Output UPS
Output Capacity
Medium Type
Equipment Mode
Decentralized
Brand
Jetpower
Technology
Online High Frequency
Input Voltage
220VAC, 1phase
Output Voltage
220VAC, 1phase
Capacity
6kVA/4200W
Trademark
JETPOWER
Specification
CE
Origin
China
HS Code
85044020
Model NO.
PHS-6K
Standby UPS
Sine Wave Output UPS
Output Capacity
Medium Type
Equipment Mode
Decentralized
Brand
Jetpower
Technology
Online High Frequency
Input Voltage
220VAC, 1phase
Output Voltage
220VAC, 1phase
Capacity
6kVA/4200W
Trademark
JETPOWER
Specification
CE
Origin
China
HS Code
85044020
Outdoor online UPS
Capacity: 6KVA/4200W
Input: 220Vac/1phase 
output: 220Vac/1phase

Key Features


JETPOWER Outdoor Intelligent High Frequency Online UPS provide continuous pure sine wave AC power supply for outside communications / network equipment.

Double-conversion online design, high temperature resistant, anti-cold, sealing level for IP55; With the wide range of input voltage and frequency of input window (-45% +35% rated voltage and ± 10% rated frequency), in many remote areas of China after a severe test of the grid.

Reliable Power Rich Experience

Mammoth series communication marginal network outdoor UPS is special for wireless communication system of outdoor micro cellular base station and design of a high-performance integrated outdoor online uninterrupted power supply system, has the very high technology advancement and practicability.


Application

This UPS is commonly used in the corner of the city, remote roads, mountains, bad environment, such as high temperature ( +50 ° C) / low temperature (-40 ° C), severe dust, moisture, rain, mist erosion, very poor power quality (voltage long-term higher than 260V or less than 160V, frequency abnormal change) in the area.
High Reliability of the UPS System
Using microprocessor control, directly produce highfrequency pulse width modulation wave (SPWM) control of the UPS inverter, to simplify the UPS control circuit, to improve the stability, to have more real-time UPS to quickly respond to changes in the external environment and guarantee the machine's control circuit is more simple and reliable.
Using digital control techniques, to avoid the traditional analog control temperature drift inherent defects such as hardware parameters, to ensure consistency and reliability of UPS.

Fine dust-proof, water-proof features
According to the overall standard of design dust-proof and water-proof IP55


With a sun protection, heat insulation, roof ventilation
With waterproof and the filtration dust inlet; The cabinet front door shutters with waterproof design, on the back of welding water tank, water tank installed above the net with quick release feature of the dust.

Environmental Adaptability
Wide input voltage, avoids frequent switching to battery power because of large power grid voltage, reduce battery failure probability, adapt to the power environment in poor areas.
Input Frequency Range 45 ~ 55Hz, to ensure the fuel generator can access all kinds of stability to meet user requirements for use on the oil machine.

Optional aceessories
Heat exchanger
The environment which require higher IP level, we use heat exchanger to effectively reduce the temperature of box inside and improve IP protection level.
Heater and temperature controller
In response to low temperature climate impact of batteries and UPS, we adopt ajustable heating device to ensure the UPS and battery life of normal use.
Model 1-10KVA 
1KVA 2KVA 3KVA6KVA10KVA
Capacity 1KVA/0.7KW2KVA/1.4KW3KVA/2.1KW6KVA/4.2KW10KVA/7KW
Nominal Voltage220/230/240VAC 
Nominal Frequency 50Hz/60Hz 
Input 
Voltage Range 115~295VAC(±3VAC)176~297VAC(±3VAC)
Frequency Range50HZ:(46~54HZ);60HZ:(56HZ~64HZ)
Soft Start 0~100% 5sec 
Power Factor 0.98
Output 
Voltage Precision220/230/240X (1±2%)VAC 
Frequency Precision50/60HZ±0.05Hz 
Power Factor 0.7/0.8(optional)standard 0.7 
Wave DistortionLinear load <3% Non-linear load <6% 
Overload Capability Overload (110% ~ 150%) for 30 seconds,then automatically transfer to bypass.When load is normal,it can automatically transfer to normal mode. 
Crest Factor 3:1 
Transfer Time 0ms(AC to DC ) 
Battery 
DC Supply Voltage 36VDC 96VDC 96VDC240VDC240VDC
Charge Current 4A/8A(optional)4A/8A(optional
)
4A/8A(optional)4.2A4.2A
Internal Battery Capacity (38/65/80/100AH)optional 
Panel Display
LCD Display input and output voltage, frequency, battery voltage
Communications 
communicate interface RS232\SNMP card(optional)
Work Environment 
Temperature 0~40ºC
Humidity 0~95% (Non-condensing) 
Storage Temperature -25ºC~55ºC
Elevation < 1500m 
Physical Characteristics 
Weight(KG)/N.W85125125150155
Dimensions ( Wx D x H )mm 613×640×954 650×753×1227650×753×1227940×940×1770940×940×1770