8/16/32/64 Ports CATV Multi Ports High Power Optical Amplifier EDFA

China 8/16/32/64 Ports CATV Multi Ports High Power Optical Amplifier EDFA, Find details about China EDFA, High Power Optical Amplifie from 8/16/32/64 Ports CATV Multi Ports High Power Optical Amplifier EDFA

Model NO.
YGF1532XXC
Trademark
Huanshun
Specification
88(H)*482.6(W)*387(D)mm
Origin
Ningbo, China
HS Code
8517699000
Model NO.
YGF1532XXC
Trademark
Huanshun
Specification
88(H)*482.6(W)*387(D)mm
Origin
Ningbo, China
HS Code
8517699000
1.Summary
    With the implementation of Broadcast Whole-Optical-Network Transmission Fiber To The Home projects (FTTH),When EDFA is used as a Cascading Magnification Device in the CATV system, the C/N system will deteriorate seriously, So the EDFA should have High Saturation Output Power and Low Distortion, Then EYDFA(Erbium-Ytterbium-Doped Fiber Amplifier) double cladding High Power Optical Amplifier can perfectly meet the demand of the nowadays FTTH and FTTB networks.
    HSGF100Y series Outdoor EYDFA adopt Aluminum Die-Casting Waterproof Box structure, Process of Spray or Baking Paint.    YGF15NN-XX(C) series Indoor EYDFA adopt Whole-Aluminum Box structure, Surface with Oxidation Wiredrawing finishing process; Our Pump Source parts are manufactured by World Leading Semiconductor Company: JDSU who supply us with Multi-Mode High Power Pump Lasers, Double-Clad Synthesizers are supplied by the United States OFS company. The EYDFA device is equipped with Optical Power Output Stabilization Circuit and Laser Thermoelectric Cooler to ensure stable work. Microprocessor software do monitor the Working Status of the laser, the Working Parameters are displayed by the Digital Panel (LCD). Once the Working Parameters of the laser deviate from the Software Setting Allowable Range, Microprocessor will automatically turn off the Laser Power, Red Light flashes alert, The Digital Panel indicates the cause of the failure.




2. Features
✓ EXCELLENT QUALITY: Multi-Mode High Power Pump Laser, Power is through Optimization & Balance Technology, Minimize the Noise Factor of EYDFA & comparable with general EDFA, which can make the system excellent CNR;
✓ MULTI-OUTPUTS: The Maximum Synthetic Output Power is up to 1.6W ~ 6W, Multi-Ports Output can be matched according to the user demand. Outdoor EYDFA structure size are 4×20~23, 8×18~23dBm; Indoor EYDFA structure size are 4×20~23, 8×18~23, 16×18~23, 32×18~23dBm;
✓ HIGH RELIABILITY: Outdoor EYDFA use a Fully Sealed Waterproof Box, Built-in High Performance Anti Lightning Switch Power Supply, It can be working well under AC165 ~ 265V City Electricity or AC35 ~ 80V Feed. Indoor EYDFA use a Whole-Aluminum 19" Standard Box, can be directly mounted on the 19" Cabinet.
✓ WORKING CONDITION INTUITION: The Pump Laser is the most valuable device in the whole machine.
A Microprocessor is set up to monitor the Working State of the Pump Laser, and the Working Parameters are displayed by the LCD Panel.
✓ NETWORK MANAGEMENT SYSTEM: Supporting SNMP Network Management Protocol, Telnet, HUANSHUN's FTTH Integrated Network Management System.
✓ FWDM INTEGRATED MODULE: Any model of Indoor EYDFA can be integrated with FWDM, Outdoor EYDFA 4&8 output can also be integrated with FWDM. When combined with GPON, EPON PON signals, One-Fiber-Optic Three-Waves transmission appears more simple and convenient for optical network.

3. Performance Parameters
ItemsUnitsPerformance Parameters
Optical Working Wavelengthnm1535~1565
Input Optical Power Range
Nominal Input Optical Power
dBm-3~+10/+3
MAX/MIN Warning ValuesdBm+10/+2~-10 front panel optical alarm, ≤-10 shut down
Noise FactordB≤5.0 (0 dBm,@1550nm)
Output Optical Power Stability
Gain Flatness
dB<±0.5/<±0.3
Polarization Sensitivity
Polarization Mode Dispersion
dB/Ps<0.2/<0.5
Input/Output
End Pump Leakage Power
dB≤-30/≤-30
Optical Input and Output Reflection LossdB>45 SC/APC (Stepped End-Face)
Output PowerdBm32x18,19,20,21,22,23
CNR/CTB/CSOdB≥48/≥63/≥63(Notes 1)
Power Supply/Power VoltageV/WOutdoor EYDFA: AC165~265 City Electricity or AC35~75Feed/25
Indoor EYDFA: AC165~265 City Electricity or DC-48V/40(Double Power Working)
Working/Storage TemperatureºC-20~50/-30~70(Relative Temperature 5~90%)
Box SizemmOutdoor EYDFA: 88×482.6×387
Indoor EYDFA 2U: 88×482.6×387
Network 
Management Interface
/RJ45(Follow the Network Management National Standards, and Support WEB Browser)
FWDM LossdB≥0.65(Model Suffix with C has this Feature)
Notes: 
1.The Optical Link Indexes are measured by Measuring Optical Transmitter and Optical Receiver Combined Testing Results.
2.Above Main Performance Indexes conform to the Technical Requirements and Measurement Methods of GY/T 184-2002 CATV Analog Optical Fiber Amplifier.

4. Application Programs
  1550nm CATV Signal DTH(Directly To Home)
10km/-12point-to-point power, 256DTH designto first level optical splittingto second level optical splittingto third level optical splittingthird level optical splitting to FTTH
powerserver room 4 routes5km4optical splitting2.5km4optical splitting2km4optical splitting0.5kmpoint-to-point power
20.57.51.257.50.6257.50.57.50.125-12dBm
  Description: calculated from the above table can be obtained that 1-route 22dBm [22-20.5-1.5 (Connecting Point Loss or Reserved Power)] optical output signal can be assigned to 256DTH.

 1550nm CATV&EPON Signal Integrated Single Optical Fiber To The Home
10km/-12point-to-point power, 64DTH designto first level optical splittingto second level optical splittingto third level optical splittingthird level optical splitting to FTTH(included 0.75dB WDM loss)
powerconnecting point lossWDM5km4optical splitting3km4optical splitting1km4optical splitting1kmpoint-to-point power
CATV>=15dBm0.50.751.257.50.757.50.257.51-12dBm
EPON>=1dBm0.50.751.257.50.757.50.257.51-26dBm
  Description: calculated from the above table calculation can be obtained that the EPON signal with the under 64DTH, CATV each signal only need 15dBm.

1550nm CATV&GPON Signal Integrated Single Optical Fiber To The Home
10km/-12point-to-point power, 128DTH designto first level optical splittingto second level optical splittingto third level optical splittingthird level optical splitting to FTTH(included 0.75dB WDM loss)
powerconnecting point lossWDM5km8optical splitting3km4optical splitting1km4optical splitting1kmpoint-to-point power
CATV>=18.5dBm0.50.751.25110.757.50.257.51-12dBm
GPON>=2.5dBm0.50.751.25110.757.50.257.51-28dBm
  Description: calculated from the above table calculation can be obtained that the GPON signal with the under 128DTH, CATV each signal only need 18.5dBm.

5.Manufacturing Process


6.Certifications & Test Reports


7.About Hunashun Network
    Zhejiang Huanshun Network Technology Co., Ltd. was founded in early 1988, We're located in the birthplace of seven thousand years ancient culture - "Yuyao,Ningbo" which has the reputation of "China Plastic Kingdom Mold Hometown". The registered capital of the company is 8 million dollar, and the employee is 100.
    Since the establishment of the company in the past 30 years, our company has been working on R&D and production of photoelectric transmission equipment, mainly are: Optical Transmitter, Optical Receiver and Optical Amplifier. With the transformation of CATV network digitalization, two-way transformation and the construction of the next generation of CATV network, the main products of our company are upgrading and upgrading continuously.
    The latest generation of our FTTH products are High Power Multiple Outputs (8-64Ways) Optical Amplifier,
 FWDM & WDM Modular Optical Amplifier, 1550nm Receiving-Type Ultra Low Power Optical Receiver, FTTH ONU (WIFI)+CATV Receiving Double-Fibers/Single-Fiber(WDM) Optical Terminal, FTTH ONU or WIFI E/GPON Optical Terminal, EPON OLT+EYDFA Outdoor Passive Optical Network Integrated Terminal Device.
    The company has been adhering to the Core Values of "Thanksgiving, Innovation, Pragmatism and Win-Win", and is committed to become a Outstanding Comprehensive Provider of Cable Network Integrated Services, Aiming at building the First Brand of CATV Access Network Application Service. In the near future, we'll move forward to "Smart Community, Smart Pension, Smart Medical Care" area, to bulid the Cable Network Based Smart Community Service System.