Tungsten Ball Edge Finder with Magnetic Lampstand Pedestal Machine Tools

China Tungsten Ball Edge Finder with Magnetic Lampstand Pedestal Machine Tools, Find details about China Optical Edge Finder, Mechanical Edge Finder from Tungsten Ball Edge Finder with Magnetic Lampstand Pedestal Machine Tools

Model NO.
PFT020
Customized
Non-Customized
Application
CNC Machining Center, Milling Machine
Model
Optical Edge Finder
Concentricity
0.005mm
Trademark
Perfect
Transport Package
Plastic Box
Specification
TUV, CE, ISO
Origin
Jiangsu Province, China
Model NO.
PFT020
Customized
Non-Customized
Application
CNC Machining Center, Milling Machine
Model
Optical Edge Finder
Concentricity
0.005mm
Trademark
Perfect
Transport Package
Plastic Box
Specification
TUV, CE, ISO
Origin
Jiangsu Province, China

Tungsten Ball Edge Finder with Magnetic Lampstand Pedestal Machine Tools


 
Suitable for CNC machining center and milling machine, measuring and setting the X and Y axes of workpiece
The 4mm probe is used for holes and narrow grooves
The photoelectric edgefinder is used for deep hole detection where visual vision is not possible.

Product features and instructions
1.10mm diameter can be installed on cutting head chuck or drill hole chuck (see figure 1)
2. Please gently press the side edge of the probe with your finger to make it 0.5mm off (see figure 2).
3. Make it rotate at 400-600rpm
4ยท small spring force can avoid small milling cutter or bit fracture
5. Make the probe touch the end face of the workpiece as shown in (figure 2), touch and move it bit by bit, and it will become as
shown in (figure 3). The probe will not vibrate, just like static state. This sliding start point is the desired reference
position
6 the end face position of the workpiece itself is the coordinate position of 5mm plus the probe radius