China Thermal POS Paper Roll Converting Machine, Find details about China ECG Paper Roll Cutting Machine, Thermal Paper Roll Slitter Rewinder from Thermal POS Paper Roll Converting Machine
| Model Type | JT-SLT-900 |
| Max. Parent Web Width | 900mm |
| Max. Parent Web Diameter | 1000mm |
| Max. Rewinding Diameter | 160mm |
| Min. Slit Width | 25mm |
| Max. Machine Speed | 150m/min |
| Unwinding Shaft | 3" Air Expanding Shaft |
| Rewinding Shaft | 0.5", 1" are available(or as request) |
| Voltage | three-phase four-wire, 380V,50HZ |
| Power | 2.9 kw |
| Weight | 1200kg |
| Overall Dimensions(L*W*H) | 2100mm* 1900mm *1500mm |
| SPECIFICATIONS |
| Machine is used for slitting and rewinding all kinds of thermal paper, including fax paper, cash register paper, ATM paper, ECG paper, medical record paper, POS paper, self-adhesive trade marks, non-woven cloth, films etc. |
| Main |
| Machine adopts Siemens PLC control system and touch screen, all the parameters are displayed on the monitor, and it will automatic work. |
| The main motor adopts Siemens inverter motor, and frequency inverter control. |
| Machine adopts automatic Chain link lift-up loading system. Using the separate cylinder control locking the shaft. |
| All transmission rollers have been dynamic/static balance treated. |
| Machine adopts red line marking system, printing red line at the end of paper rolls. |
| Machine adopts round blades to slit, it equipped with automatic wasting materials edge trimming system. |
| It adopts auto tucker, adjust the paper material loose or tight easily. |
| It adopts 2 sets sensor & fully automatic tension control controller to keep constant tension. |
| It adopts auto meter counter, when it reach the setup length, the machine stop and alarm automatically. |
| It can adopts automatic cutter and gluer. |
| It equipped with emergency switch. |
| Application Material |
| fax paper, cash register paper, ATM paper, ECG paper, medical record paper, POS paper, self-adhesive trade marks, non-woven cloth, films etc. |
| Unwinding Section |
| 3''(76mm)air expanding shaft Chain link automatic lift-up loading system Cylinder locking the unwinding shaft Guide & Slide AMT from Taiwan Magnetic Clutch Wheel for adjust waste edge |
| Slitting Section |
| Disc Cutter Assembly adopt the cam self-locking Cutter with adjustable and moveable blade base. Meter counter |
| Rewinding Section |
| 0.5", 1", 1.5" 2" are available Pressure roller Auto Tucker |
| Controlling Section |
Siemens PLC & HMI All the parameters are displayed on the monitor |
| Tension control Section |
Automatic Tension Controller system to control constant tension Two set Sensor |
| Trimmed Waste |
| Edge Waste Blower with Expulsion Tube |
| Red Line Mark System |
Marking red line |
| Configuration | |||
| Name | Model | Pieces | Remark |
| Computer System | PLC+HMI | 1 set | Siemens |
| Main motor | 1 set | Siemens | |
| Frequency inverter | 1 Piece | Innovance from China | |
| Air Pressure Valve | 1 set | SMC | |
| Cylinder | 2 Piece | AIRTAC | |
| Unwinding Shaft | 76mm Air Expanding Shaft | 1 Piece | |
| Rewinding Shaft | 0.5'' 1'' or as your request | 2 Piece | |
| Upper / Lower Knife | 16 sets | ||
| Tension Controller | 1 set | ||
| Sensor | 2 sets | ||
| Low Voltage Electrical Switch | SCHNEIDER | ||
| Spacer | As your request | China | |
| Magnetic Clutch | 1 set | From Taiwan | |
| Low Voltage Electrical Switch | CHINT | ||
| Relay | Omron | ||