China 0-10V Dimmable IP66 Constant Current LED Driver 1750mA 66V 110V, Find details about China LED Driver 1750mA 66V 110V, Constant Current LED Driver from 0-10V Dimmable IP66 Constant Current LED Driver 1750mA 66V 110V
Feature
· Output constant current
· Universal AC input:100-265VAC
· Built-in active PFC function
· High efficiency up to 89%
· Protections:Short circuit/Over current/Over loading
· Cooling by free air convection
· IP66 design for indoor or outdoor installation
· Class 1 power unit
· Three in one dimming function(0/1-10Vdc or PWM signal or resistance)
· Dimming range: 0-100%
· Suitable for LED lighting and moving sign applications
· Compliance to worldwide safety regulations for lighting
· Three years warranty
Specification
Model | KI-1101750-A-DIM | KI-902100-A-DIM | KI-802500-A-DIM | |
Output | DC Current | 1750mA | 2100mA | 2500mA |
Current Tolerance | ±5% | |||
Output voltage range | 66-110V | 54-90V | 48-80V | |
Rated power | 192.5W | 189W | 200W | |
Open circuit voltage(Max) | 115V | 95V | 85V | |
Input | Voltage Range | 100~265VAC | ||
Frequency Range | 47~63HZ | |||
Power Factor | PF≥0.98/120VAC PF≥0.98/230VAC PF≥0.95/265VAC(Full loading) | |||
Efficiency(Typ.) | 89% | 89% | 89% | |
AC Current(Max.) | 1.89A | 1.85A | 1.96A | |
Leakage current | <0.5mA | |||
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed | ||
Over Loading | ≤120% | |||
Over temperature | 100ºC±10ºC, Shut down o/p voltage, recovers automatically after temp. goes down. | |||
Others | Net.Weight | 1.6Kg | ||
Size | 256/78*47mm(L*W*H) | |||
Packing | 305*295*210mm 10PCS /CTN | |||
Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25ºC of ambient temperature. 2. Tolerance:includes set up tolerance,line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation,the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |