Products

PAC LV Polyanionic Cellulose Polymers Low Viscosity Drilling Fluid Additive

China PAC LV Polyanionic Cellulose Polymers Low Viscosity Drilling Fluid Additive, Find details about China Filtration Control Agent, Drilling Fluids from PAC LV Polyanionic Cellulose Polymers Low Viscosity Drilling Fluid Additive

Model NO.
DFS07-001
Model NO.
DFS07-001

PAC LV Polyanionic Cellulose Polymers Low Viscosity Drilling Fluid AdditivePAC LV Polyanionic Cellulose Polymers Low Viscosity Drilling Fluid AdditiveProduct Description

SHARKPAC® L filtration control additive is high-quality Polyanionic Cellulose Polymers. It is used in most water-based drilling fluids including fresh water, seawater and brine up to 300°F(149°C). SHARKPAC® L has a minimal increase in rheology, is non-toxic and does not require a biocide. SHARKPAC® L is can also encapsulate solids to control dispersion of active shale.

Applications/Functions

  • Control filtration rates with minimal increase in rheology  
  • Aids in the formation of a tough, thin filter cake to minimize the potential for differential sticking

Advantages

  • Temperatures stable up to 300°F (149°C)
  • No fermenting, no biocide needed
  • Effective in fresh water, seawater and brine fluids
  • Functions in all pH range
  • Produces thin, slick, tough filter cake
  • Inhibit hydratable, swelling shales
  • Environmentally compatible

Typical Properties

  • Appearance: Cream-colored, free-flowing powder
  • Specific gravity: 1.5-1.8
  • pH (1% aqueous solution): 7.75

Recommended Treatment

  • A typical treatment range is 0.5-3 ppb (1.4-8.6 kg/m3).

Package

  • 25 KG SACK
SHARKPAC® is registered trademark of SHARK Oilfield Services Company. All rights reserved.

PAC LV Polyanionic Cellulose Polymers Low Viscosity Drilling Fluid AdditivePAC LV Polyanionic Cellulose Polymers Low Viscosity Drilling Fluid Additive
Product CodeSHARKProduct DescriptionApplications/Functions
DFS07-001SHARKPAC® LLow Viscous Polyanionic Cellulose Filtration Control Agent for water based mud with minimal viscosity increase up to 300°F
DFS07-002SHARKPAC® RHigh Viscous Polyanionic Cellulose Filtration Control and viscosifier agent for water based mud up to 300°F
DFS07-003SHARKCMC® LLow-viscosity, technical grade sodium carboxymethyl cellulose for filtration control Filtration Control Agent for water based mud up to 250°F with minimal viscosity increase, salinity tolarant to 50,000ppm 
DFS07-004SHARKCMC® HHigh-viscosity, technical grade sodium carboxymethyl cellulose for filtration control and supplemental viscosity Filtration Control and viscosifier agent for water based mud up to 250°F, salinity tolarant to 50,000ppm 
DFS07-005SHARKSTAR®Pregelatinized modified starch Filtration Control Agent for water based mud up to 250°F with minimal viscosity increase
DFS07-006SHARKSTAR® HTModified polysaccharide/ tapioca starch Filtration Control Agent for water based mud up to 325°F with minimal viscosity increase
DFS07-007SHARKSTAR® NHydroxypropyl carboxymethyl starch/Cross-linked starchReduce filtration in reservoir sections up to 300°F
DFS07-008COPOTROL®Sodium polyacrylate copolymer High-temp fluid loss and rhelogy stabilizer for low calcium, low solids or non-dispersed muds up to 400°F
DFS07-009WHITEMP®AAM-AMPS copolymer HPHT filtration control for WBM up to 400°F, white free-flowing powder 
DFS07-010WHITETROL® XAM - AMPS copolymer HPHT filtration control for WBM up to 500°F, white free-flowing powder
DFS07-011BLACKLEO®Highly-oxidized leonarditeHigh-temp WBM fluid loss, thinner, emulsifier for oil in water emulsions up to 400°F
DFS07-012BLACKFLO®Sulfonated LigniteHighly sulfonated lignite polymer for HT WBM fluid loss, thinner, soluble in high brines,combination with BLACKTEMP for best performance up to 400°F
DFS07-013BLACKTEMP®Sulfonated methypheuo formald-ehyde for freshwater and brine fluids High-temp fluid loss control with minimal rheology increase used for freshwater and brine fluids up to 450°F. Salinity tolerant to 120,000ppm and calcium resistant to 2000ppm, dark brown powder
DFS07-014BLACKTEMP® PLUSSulfonated methypheuo formald-ehyde for saturated brine High-temp fluid loss control with minimal rheology increase used for saturated brine and formate brine up to 400°F. Salinity tolerant to 120,000ppm and Ca ion resistant to 2000ppm, dark brown powder
DFS07-015BLACKNEX®Resinated LigniteHigh-temp fluid loss control and rheology stabilizer for all WBM up to 425°F with chlorides below 70,000ppm and hardness not exceeding 3,000ppm
DFS07-016BLACKLIGO 400®Organophilic leonarditeHPHT filtration control for OBM up to 400°F, alternative to asphalt and gilsonite products 
DFS07-017BLACKLIGO® 500Organophilic leonarditeHPHT filtration control for OBM up to 500°F, alternative to asphalt and gilsonite products
DFS07-018BLACKTROL® 350Gilosnite - Soften point 350°FHPHT filtration control for OBM, soften point >350°F 
DFS07-019BLACKTROL® 400Gilsonite -Soften point 365-420°FHPHT filtration control for OBM, Soften point: 365-420°F
DFS07-020BLACKTROL® HPEmulsified gilsonite - Soften point 250-420°FHPHT filtration control for WBM, excellent dispersion, Soften point: 250-420°F
DFS07-021BLACKSULA®Sulfonated Asphalt - EconomicalHPHT filtration control for both WBM and OBM up to 350°F, shale stabilizer. Prevent shale hydration and sloughing as well as decrease cuttings erosion
DFS07-022BLACKSULA® PLUSSulfonated Asphalt - PremiumShale stabilizer, cuttings dispersion inhibitor and contributes to high temperature fluid loss control in both WBM &OBM up to 500°F. Partially soluble in water and oil, star product for 35 years. 
DFS07-023LIQUITROL®Liquid polymer for OBMLiquid filtration reducer in NAF up to 350°F. Reduce the requirement of organoclay
DFS07-024PURETROL®Cross-linked polymer for OBMPrimary filtration control agent for HPOBM up to 300°F, alternative to amine lignite and gilsonite,white powder
DFS07-025PURETROL® HTCross-linked polymer/Vinyl toluene-acrylate copolymerPrimary filtration control agent for HPOBM up to 500°F, alternative to amine lignite and gilsonite,white powder
DFS07-026NMSHIELDTMNANO-Technology particlesVersatile product to provide HT filtration control, improved fluids lubricity, strengthen wellbore and increase fracture breakdown pressure in sandstones and shales for both WBM and OBM up to 450°F. D50 is only 5nm.
DFS07-027LIQUITROL® HTLiquid polymer for OBMLiquid filtration reducer in NAF up to 400°F. Reduce the requirement of organoclay.

You Might Also Like