Electric Heating C-Clamp Spot Repair Vulcanizer

China Electric Heating C-Clamp Spot Repair Vulcanizer, Find details about China Conveyor Belt Hydraulic Spot Repair Machine, Belt Super Spoter from Electric Heating C-Clamp Spot Repair Vulcanizer

Model NO.
YXL-200*200
Structure
Horizontal
Temperature
145 Degrees
Power
1.1 Kw
Weight
145 Kgs
Pressure
2.0 MPa
Trademark
Anai
Transport Package
Wooden Box
Specification
1300 * 200 * 780 MM
Origin
China
HS Code
84778000
Model NO.
YXL-200*200
Structure
Horizontal
Temperature
145 Degrees
Power
1.1 Kw
Weight
145 Kgs
Pressure
2.0 MPa
Trademark
Anai
Transport Package
Wooden Box
Specification
1300 * 200 * 780 MM
Origin
China
HS Code
84778000

 

Electric Heating C-Clamp Spot Repair VulcanizerElectric Heating C-Clamp Spot Repair VulcanizerElectric Heating C-Clamp Spot Repair VulcanizerElectric Heating C-Clamp Spot Repair VulcanizerElectric Heating C-Clamp Spot Repair VulcanizerElectric Heating C-Clamp Spot Repair Vulcanizer
      ModelTemperature(ºC)Power(kw)Dimensions(L*W*H mm)Weight(kg)Pressure(Mpa)
YXL-200*200       145    1.1     1300*200*780    145      ≤ 2.0
YXL-250*250       145    1.4     1300*250*780    149      ≤ 2.0
YXL-300*300       145    1.6     1300*300*780    152      ≤ 2.0
YXL-350*350       145    1.9     1300*350*780   1163      ≤ 2.0

Conveyor belt vulcanizing press is the widest used conveyor belting equipment, its only need a few steps to confirm press model.

The proper model selection for a sectional vulcanizier depends on determining dimensions A and B(see diagram above)

A-  the platen length(A) is calculated by adding to the belt manufacturer's recommended splice length.

 6 inches(150mm) for fabrics belt

14 inches(355mm) for steelcord belt

B- the platen width(B) which includes the bias angle, it determined by adding to the belt width

6 inches(150mm) for fabric belt

8 inched(200mm) for steelcord belt

To this figure multiply by:

1.07 for 22 degree bias angle

1.05 for 17 degree bias angle

Dimensions A and B represent the outside platen dimensions. Scan down the list below until  you arrive at a platen size the corresponds with your figures.

If the size you require is not listed below our Sales department will be happy to recommend a suitable size, rectangular configurations and multiple platen arrangements are also available upon request.
 

Specifications are subject to change without notice.

Build-in cooling device on all vulcanizer.

Total weights include electrical control panel, cable sets are set-up templates for all models.

All models include electronic fluid pressure pump

Temperature adjustable between 0-199 Degree.C

Sectional vulcanizers are build on a 18 degree bias

Custom sizes, rectangular configurations and multiple  platen arrangements available on request.
Electric Heating C-Clamp Spot Repair Vulcanizer