Mobile Welder Fume Master/Welding Fume Extractor/Portable welding dust collector

Feel free to contact me via tel:15064847869

Welding dust collector, welding fume extraction,welding smoke extractor, welding fume exhaustor, welding fume purifier, smoke eater from source

Applications :Qingdao Loobo welding fume extractor are mainly used to extract/collect the fume and dust in the metal fabrication process, like the welding, polishing, grinding, metal cutting, etc.
With active carbon filter layer, some odor gas can be absorbed before released the clean air. Portable type with small size, you can move them freely in your workshop to the working posation, economic and high efficiency.
 
Available for both one arm and double arms for one or two working stations.
 
 LB-JZ Series Welding Fume Extractor Parameters Table:
  
LB-JZ (D) back-flushing pressure is 0.5-0.6Mpa.
The " D " in models for the welding fume extractors represent Pulsing back-flushing automatic dust-removal system. " S " respresents the welding fume extractor has the double  arms for two working stations. 
 
The below picture shows that the welding fume extractor are used in the welding workshop to extract the fume and keep the workshop clean
 
 
The welding fume extractor/ purifier is easy of installation, and has no technical requirements when the customer install and use it. The flexible extraction arm is made from high quality material of PVC and steel wire, which is anti-corrosion, heat-resistant of up to 140°C. It can swivel 360º and can be brought in any desired direction without additional support. It is equipped with the damper to adjust the wind. It is equipped with the caster wheels and can be freely mobile to meet the requirements of different work places.
 
The purified gas can meet the standard requirements and can enter into work room or indoor place, which is helpful to keep the room close, maintain the temperature and be convenient for work.

Operating Principle:
 
Under the help of the fan device, the welding fume is sucked into inlet through multi-direction sucking hood. There is the flame arrester in the inlet, so the spark can be blocked here, and the left fume and dust is sucked into gravity separator. The bigger paticiles firstly descend into dust bag. The smaller particles is arrested in the surface of core filter. The cleaner gas then flow into clean room after being purified by core filter. In clean room, the clean gas is then further purified by active carbon. At last, the gas meets the required standards and enter into air or other required room.
 
The BasicStage Filtration Process about the welding fume extractor
Stage 1: Air passes trhough  the pre-filter fire-proof net. 
Stage 2: Air passes through a second pre-separator to further reduce medium to heavy particulate matter. 
Stage 3: Air passes through the LongLife-H filter where welding fume particles are captured and deposited. 
Stage 4: Activated carbon filter will help prevent or neutralize the release of odors back into the environment. 

Facility Characteristics about the welding fume extractors

1) It is equipped with special turbo fan and motor, both the air pressure and air volume can reach the standard, and to ensure that the welding fume purification a good performance.
2) Advanced design of air suction hood and dust collector function in one body, to prevent the diffusion of welding smoke pollution from the source.
3) The circuit of the machine is adopted overload protection circuit, which prevent equipment and circuit burn, so the machine has a high security and stable performance.
4) The hose of the flexible extraction arm is high quality PVC steel wire hose, it can resist the 140°C, with corrosion resistance and light weight .
5) The built in support structure is a set of self balance type linkage mechanism with characteristics of a full range of hovering, pull the handle on the hood, easily stretch the arm to reach any position within the arm length (we can custom made the arms length according to user needs, the max is 5m long), and hover in the ideal position of soot absorption without any auxiliary supporting facilities.
6)The flexible extraction arm can be applied for the complicated condition that have no way to install the ducting.
7) Filter is an important part of the fume extractor machine, it is the heart of the dust removal equipment, its performance and quality is the key to the service life of the equipment and the performance of fume extraction. We use the imported PTFE polyester fiber material for the main cartridge filter. The material has very low friction coefficient, good wear resistance and excellent chemical stability, high accuracy, according to the condition of fine up to 0.2 microns. The material surface is smooth, not easy to adhere, it is more easy for the pulse jet cleaning system. The cartridge filter service life is long, around 1-2 years under normal operating conditions.
8) Cleaning way: manual cleaning, and automatic cleaning system.
For the auto cleaning type, we use the pulse jet cleaning way, that is, one by one cartridge automatic cleaning orderly, pulse valve open a time, then generates a pulse action, the injection pulse intensity and frequency can be adjusted, and the cleaning and filtration can be run at the same time, so to make sure the machine works well and promote the production efficiency.
9) the inside of the fume extractor machine is adopted with three layer protective measures for fire hazard and large molten slag particles, to make the purifier for a longer service life, and more safe and reliable.
10) The Fume Extractor is equipped with industrial casters: the active casters and stationary casters, to make sure a free movement and positioning. The caster is of surface super polyurethane materials, to make the equipment has a high impact resistance and strength.
11) The reasonable collocation of the grid air outlet and the high quality sound insulation material can reduce the noise of the welding fume purifier effectively.
12) The consumptive material of the fume extractor has a stable performance, and convenient and quick to change.






Package and shipment:


Company Information and contact details:

Qingdao Loobo Environmental Protection Technology Co.,Ltd is one of the biggest enviromental protection products manufacturer, located in Qingdao city of china,specialized in alll kinds of portable fume extractor, downdraft benches(grinding dust removal worktable), central fume purification system, flexible suction arm,etc.
 
We have more than ten years export experience ,all of our products with the ISO9001 and CE certification, the quality can be guaranteed.
 
We have our own R&D department , have a variety of style range to meet any of your requirments and had established the economies of scale, so can dilivery fast and provide can beat your competitor's price.
 
Best Regards
 
Miss Molly Huang
 
Qingdao Loobo Environmental Protection Technology Co.,Ltd
Factory Address: No.19, Hechuan Road, Licang Industry Park, Qingdao, China
Phone: +86-15064847869
 
Fax   : +86-532-8068 7573
 
Website: 
loobohb.en.made-in-china.com(English version)
loobohb.en.made-in-china.com (Chinese version)