FILTERPURE INDUSTRIAL HIGH FLOW FILTER
 
 
Product introduction

Filtration device perfect for use before Industrial UV treatment.
Made from 304 Stainless Steel and rated to 1000kPa for high pressure applications.
Accepts 7x 40" cartridges or 14x 20" cartridges with spacers for an variety of filtration options.
Standard filtration options are 20um, 5um or 1um with other options available on request.
The "V-Clamp" closure design allows for quick, easy cartridge service or replacement.


Working Principle
1,Precision filtration is to adopt the molding of filtration material, under the action of the pressure filtration material, make prefiltration through, stay in wall, phosphate-contained residue filtrate through filtering material flow, so as to achieve the purpose of filter.
 
2,Filtration material molding of filter cloth and filter are:, filter slice, sintering filter tubes, wire wound filter,
melt-spurt filter core, etc. Because of the different filtration material, filtration aperture is not identical also. Precision filtration was between sand filter (coarse filter) and ultrafiltration between filtering, filtration aperture in commonly 0.5 ~ 120 mu m range. The same form of filtration material, press envelop dimensions can be divided into different specifications.
 
3,Wire wound filter (also called hive filter) has two kinds: one kind is polypropylene fibre - polypropylene skeleton cores, highest use temperature 60 °C; Another kind is absorbent cotton fiber - stainless steel frame filter, the highest temperature. Use 120 °C
 
4,Melt-spurt polypropylene filter is for raw material, adopting melt-spurt technology shaping filter material, the maximum operating temperature 60 °C. Precision filter can remove the water the suspended material and fine, certain colloid particles, etc.



Applications:
 

Applications: 
 
Specifications: