Concrete Bond Strength Pull Off Tester

This method is particularly suitable for applications concerning testing repairs of concrete structures where the bond strength between two layers is an important factor. The same principle is applied to test the adhesive strength of different types of surface coatings like cement plaster,lime, wall plaster, etc. on its support.

Maximum pressure: 25kN/S(MPa)
Accuracy: 0.5%.

Packing List
Features:
1.Serial communication port:Communicate with the computer through RS-232 serial communication port through which stored test data can be transmitted to the computer.Test results can be printed out by the provided software.
2. Sensor input port:Through shielded wire of sensor and straight load sensor to measure adhesion force.
3. Zero adjustment potentiometer:allow to manually adjust the initial value of sensor to zero.
4. Calibration potentiometer: calibrate EL35-1530 Calibration anvil the sensor