Products

Engine Coolant / Antifreeze Corrosion Test Apparatus

China Engine Coolant / Antifreeze Corrosion Test Apparatus, Find details about China Corrosion Test Apparatus, Dual Corrosion Test Apparatus from Engine Coolant / Antifreeze Corrosion Test Apparatus

Model NO.
GD-8031
Heating Method
Electric Heating Tube
Cooling Method
Low Temperature Circulating Water
Temperature Control Method
Digital Display Pid Thermostat
Voltage Display
Voltmeter Display
Working Unit
3 Holes
Timing Mode
Digital Timer
Pressure Control
Precision Regulator
Flow Rate Control
Precision Flow Meter
Trademark
GOLD
Transport Package
Wooden Case
Specification
Refer to ASTM D1384
Origin
Made in China
HS Code
9031809090
Model NO.
GD-8031
Heating Method
Electric Heating Tube
Cooling Method
Low Temperature Circulating Water
Temperature Control Method
Digital Display Pid Thermostat
Voltage Display
Voltmeter Display
Working Unit
3 Holes
Timing Mode
Digital Timer
Pressure Control
Precision Regulator
Flow Rate Control
Precision Flow Meter
Trademark
GOLD
Transport Package
Wooden Case
Specification
Refer to ASTM D1384
Origin
Made in China
HS Code
9031809090
Engine Coolant / Antifreeze Corrosion Test Apparatus


Introduction:

The main principle of the instrument is to process the six typical metals used in the engine cooling system into test pieces, then connect them into test piece bundle after weighing, and then completely immerse them in the specified sample.Take out the test piece at the end of the test, weigh again after being cleaned, the corrosion was evaluated by the mass change value before and after the test piece after the calibration.  

The Engine Coolant Corrosion Test Apparatus is suitable for high boiling point and ground non-engine coolants and concentrates, as well as for engine cooling system rust inhibitors.  The instrument is mainly applied to the engine coolant manufacturer and related inspection department.  

The reference standards: SH/T0085 Determination Method of Corrosion Test for Engine Coolants(Glassware Method) ASTM D1384 Standard Test Method for Corrosion Test  for Engine Coolants in Glassware


Key Features:

1. Precision regulator valve controls the intake source, the flow meter adjusts the flow rate: 100ml/min±10ml/min.  
2. Glass test tubes meet the standard requirements.  
3. Microcomputer temperature controller, digital display, accuracy ±0.1 °C  PT100 sensor.
4. Digital timer, record the experiment time, with alarm.  
5. Sand core glass gas diffusion head.  
6. 6 sets of metal test pieces, in line with ASTM standards.


Specifications:
 
1Model GD-8031
2Test standardASTM D1384, SH/T0085
3Heating methodElectric heating tube
4Cooling methodLow temperature circulating water
5Temperature control methodDigital display PID thermostat
6Voltage displayVoltmeter display
7Working unit3 holes
8Timing modeDigital timer
9Pressure controlPrecision regulator
10Flow rate controlPrecision flow meter
11Total power2500W
12Dimension690*410*760mm
13Working powerAC220V 50HZ
14Net weight31KG


Engine Coolant / Antifreeze Corrosion Test Apparatus (ASTM D1384):

Engine Coolant / Antifreeze Corrosion Test Apparatus





 

You Might Also Like